Abstract:Purpose: To evaluate the color stability of 3D-printed interim restorations with different surface treatments while immersed in various staining solutions or beverages (artificial saliva, tea, coffee, and wine) for 6 months. Material and methods: An acrylic tooth was prepared for an all-ceramic full-coverage restoration. A laboratory scanner was used to digitize the prepared abutment tooth. A virtual all-ceramic full-coverage restoration was designed on the digitized abutment tooth using a laboratory CAD/CAM software. Eighty abutment teeth and interim restorations were 3D-printed with tooth-colored photopolymerizing resin. The restorations were randomly allocated into two different groups: Polish and Optiglaze. For the Polish group, interim restorations were finished and polished with aluminum oxide finishers/polishers. For the Optiglaze group, one layer of nanofilled, light-polymerizing protective coating was then applied. The 80 printed interim crowns were divided into 4 different groups depending on where they would be immersed: Artificial saliva, coffee, wine, and tea. After the sample allocations, there were 8 experimental groups. Each group was allocated with 10 specimens. Color measurements were obtained using a digital spectrophotometer in conjunction with The CIE L*a*b* system before the immersion and 6 months after the immersion. Two-way analysis of variance (ANOVA) was used to test the effects of surface treatment, immersion liquid, and their interaction on ΔE at 6-month post-immersion. Fisher's protected least significant differences (LSD) was used as post hoc test to compare groups differences (α = .05). Results: There were significant effects of surface treatment [F(1,72) = 13.39, p = 0.000], immersion liquid [F(3,72) = 74.18, p = 0.000], and their interaction [F(3,72) = 16.33, p = 0.000] on ΔE at 6-month post-immersion at the α = .05 level. The polish group showed significantly higher ΔE than the Optiglaze group when immersed in coffee (p < 0.001) and wine (p = 0.015). The Optiglaze group showed significantly higher ΔE than the polish group that was immersed in artificial saliva (p < 0.001). The wine group showed higher ΔE than all other immersion liquid groups for both polish and Optiglaze surface treatments (p < 0.001 for all comparisons). ΔL* showed a reduction that was significantly higher than the 2.0 acceptability threshold in the wine-polish (p < 0.001) and wine-Optiglaze (p < 0.001) groups. ΔE showed a color change that was significantly higher than the perceptibility and acceptability thresholds for all the groups under polish surface treatment (p < 0.001). ΔE also showed a color change that was significantly higher than the perceptibility and acceptability thresholds for artificial saliva, tea, and wine under Optiglaze surface treatment (p = 0.004). Conclusions: 3D-printed interim restorations showed significant discoloration after 6-months immersions in the artificial saliva and common beverages (including tea, coffee, and wine). Among all the chromogenic beverages, red wine caused the most significant discoloration on the interim restorations. When 3D-printed interim restorations are needed for extended intraoral service, nano-filled, light polymerizing protective coating can reduce the restoration discoloration caused by chromogenic beverages. The protective effect is most significant against coffee.

Effect of Staining Solutions on Color and Translucency Stability of Resin-Composite Computer-Aided Design and Computer-Aided Manufacturing Blocks

Effect of Staining Solutions on Color of Pre-Reacted Glass-Ionomer Containing Composites

Color stability of CAD‐CAM hybrid ceramic materials following immersion in artificial saliva and wine

The Effect of Different Dietary and Therapeutic Solutions on the Color Stability of Resin-Matrix Composites Used in Dentistry: An In Vitro Study

INFLUENCES OF DIFFERENT SOLUTIONS ON THE COLOUR STABILITY AND MICROHARDNESS OF CONTEMPORARY LIGHT CURED COMPOSITES: AN IN VITRO STUDY Received 2022-12-09; Accepted 2023-03-18; Published 202

Staining- and aging-dependent changes in color, translucency, and gloss of cloud-shade and one-shade resin composites

Effect of Common Staining Beverages on Color Stability of Polymer-infiltrated Ceramics and Extra Translucent Zirconia: An In Vitro Study

Assessing one-shade composite resin color stability in response to everyday drinks

The Effects of Beverages and Surface Treatments on the Color Stability of 3D-Printed Interim Restorations

Color Stability of Bioactive Restorative Material vs Nanohybrid Resin Composite: An In Vitro Study

Effect of bleaching on color change of composite after immersion in chlorhexidine and coffee

Color Stability Assessment of Single- and Multi-Shade Composites Following Immersion in Staining Food Substances

Determination of the Color Change of Various Esthetic Monolithic Monochromatic Computer-Aided Design/Computer-Aided Manufacturing Materials

Effect of bleaching with 15% carbamide peroxide on color stability of microhybrid, nanohybrid, and nanofilled resin composites, each in 3 staining solutions (coffee, cola, red grape juice): A 3-phase study

Effect of coffee staining and simulated oral hygiene methods on the color and translucency of a nanoceramic resin

Effect of In-Office Bleaching Agents on the Color Changes of Stained Ceromers and Direct Composite Resins

Effect of mouthwashes on the color stability of a nanohybrid composite resin

Colour stability of stained composite resins after brushing with whitening toothpaste

Colour Parameters and Changes of Tea-Stained Resin Composite Exposed to Whitening Pen (In Vitro Study)

Assessment of color stability and translucency of various CAD/CAM ceramics of different compositions and Thicknesses: An in vitro study

Color stability of resin composites for orthodontic attachments: an in vitro study