Abstract:Non-uniform high-temperature large heat flux is commonly encountered in engineering applications, posing challenges to heat transfer processes and affecting system performance. High temperature heat pipes offer an effective solution to mitigate the adverse effects of non-uniform heat flux by leveraging the unique characteristics of their inner alkali metal (or alloy) working fluid, such as high latent heat of vaporization, strong heat flux density, and ability to operate at elevated temperatures. These features enable high temperature heat pipes to achieve excellent isothermal and uniform heat transfer performance, thereby improving overall thermal management in heat transfer systems. Building upon the investigation of the original high temperature heat pipe, this study designed and fabricated a specially shaped high temperature heat pipe with a spherical crown surface as the evaporator. Experimental research was conducted to assess its frozen start-up performance and heat transfer characteristics under the influence of axial non-uniform heat flux. The results were also analyzed theoretically, providing valuable insights into the frozen start-up performance and heat transfer performance of the high temperature heat pipe in the presence of non-uniform heat flux conditions. The analysis results reveal several important findings: (1)The high temperature heat pipe demonstrates its capability to convert axial non-uniform high-temperature large heat flux into a uniform heat flux, thus achieving excellent uniform heat transfer performance. (2)The theoretical solution obtained through the lumped heat capacity analysis method shows satisfactory agreement with the actual frozen start-up process of the high temperature heat pipe. This theoretical reference can aid in the transient analysis of the frozen start-up process under the influence of axial non-uniform high-temperature large heat flux. (3)The experiment investigated the influence of heating power on heat transfer performance and temperature uniformity. The results indicate that the temperature uniformity of the high temperature heat pipe exhibits a trend of initially increasing and then decreasing. Specifically, the best temperature uniformity is achieved when the heating power is 1084.7 W. Moreover, when the heating power is 1197.9 W, the high temperature heat pipe exhibits the lowest equivalent thermal resistance of 0.0265 K/W, indicating the best heat transfer performance. (4) The variable power heating approach demonstrates that increasing the heating power leads to an extension of the effective length of the heat pipe. The most favorable heat transfer performance and temperature uniformity are observed when the heating power is set to 1133.7 W, allowing the full length of the condenser of the high temperature heat pipe to participate actively in the heat transfer process. These results can provide quantitative experimental data and theoretical references for improving the thermal shock of non-uniform high-temperature large heat flux.

Study of Gravity Effect on the Operating Characteristics of High-Temperature Bent Heat Pipes

Experimental Study on Startup and Heat Transfer Performance of High Temperature Sodium Heat Pipe

Thermodynamic analysis of gravity heat-pipe steam generator

Numerical simulation analysis of high-temperature bent sodium heat pipes

Theoretical and Experimental Research on Heat Transfer Performance of the Semi-Open Heat Pipe

Heat Transfer Performance and Startup Characteristics of Separated Gravity Heat Pipe

Experimental Study on 100 Hour-Term Performance of High-Temperature Sodium Heat Pipes

Experimental study on startup performance of high temperature potassium heat pipe at different inclination angles and input powers for nuclear reactor application

Experimental study on heat transfer performance of high temperature heat pipe under axial non-uniform heat flux

Effect of inclination angle on the startup of a frozen sodium heat pipe

Experimental and numerical simulation study of sodium heat pipe with large aspect ratio

Experimental Study on Startup Performance of a High-temperature Liquid Metal Heat Pipe with Fins

Experimental evaluation on heat transfer limits of sodium heat pipe with screen mesh for nuclear reactor system

Experimental Study on the Thermo-Hydrodynamic Characteristics of a Nitrogen Pulsating Heat Pipe

Effect of deionized water on heat transfer characteristics of gravity heat pipe

Two-Phase Flow Visualization and Heat Transfer Characteristics Analysis in Ultra-Long Gravity Heat Pipe

Design, fabrication, and comparative analysis of prototype high-temperature heat pipes charged with sodium for heat pipe cooled reactor NUSTER-100

An Improved Model of the Heat Pipe Based on the Network Method Applied on a Heat Pipe Cooled Reactor

Numerical investigation on thermal behavior of high temperature heat pipe based on thermal resistance network model

Experimental investigation of the thermal performance of high-temperature flat heat pipe with a single heat source and a multi heat source

Experimental Study of the Heat-Transfer Performance of an Extra-Long Gravity-Assisted Heat Pipe Aiming at Geothermal Heat Exploitation