Abstract:The design and safety assessment of Lead-cooled Fast Reactors (LFRs), being one of the Generation IV technologies, must be supported by extensive experimental campaigns. Such activities are necessary to completely understand the physical phenomena involved in such reactors, as well as to properly develop new numerical tools or validate the pre-existent ones. From the experimental point of view, ENEA Research Center of Brasimone is one of the most active institutions, thanks to its experimental platforms and know-how maturated since the early 2000s. From the numerical point of view, Computational Fluid Dynamics (CFD) codes are the most suitable ones to analyze some phenomena expected in a Heavy Liquid Metal (HLM)-cooled reactor, such as the complex 3D phenomena occurring within the pools or the core fuel assemblies. In addition, the fluid thermal conduction, usually neglected in a System Thermal-Hydraulic (STH) code, can assume a significant importance in some transient scenarios, e.g., loss of flow accidents with transition from forced to natural circulation. However, the safety analysis of the LFRs should still rely on the use of STH codes because of their lower computational cost compared to the CFD codes, also considering the high number of transient evolutions to be analyzed for the purpose of the reactor licensing. At ENEA Brasimone, a novel coupling approach has been developed to couple the CFD code Ansys CFX with the STH code RELAP5/Mod3.3. The coupled tool aims at exploiting the advantages of the two families of codes. It adopts a multi-scale approach to simulate in detail some circuit components while performing system-level analysis, so as to keep an acceptable computational time. The coupling technique is based on ad-hoc user routines written in FORTRAN and implemented in Ansys CFX, which acts as the master code. The user routines take care of time step management, data exchange, RELAP5 execution, and error checking. The goal of this paper is to assess the simulation capabilities of the coupled tool by reproducing a forced-to-natural-circulation transition test, carried out at the NACIE-UP facility, with LBE as working fluid. The work has been realized in the framework of the IAEA Coordinate Research Project-I31038, named "Benchmark of Transition from Forced to Natural Circulation Experiment with Heavy Liquid Metal Loop".

Code-to-Code Verification of Thermal Hydraulic Subchannel Code LINDEN

Thermal Hydraulic Review of Light Water Reactor Based on Subchannel Code CTF

Development of sub-channel analysis code for CANDU-SCWR

Development and assessment of a three-field subchannel code for thermo-hydraulic transient analysis under reflood conditions

A subchannel analysis code for advanced liquid metal fast reactor cores and study on heat transfer characteristics of core geometry parameters

Verification of Three Dimensional Neutronics and Thermal-Hydraulic Coupled Code With RIA Benchmarks

Ctf: A Modernized, Production-Level, Thermal Hydraulic Solver for the Solution of Industry-Relevant Challenge Problems in Pressurized Water Reactors

Verification of a self-developed CFD-based multi-physics coupled code MPC-LBE for LBE-cooled reactor

Primary Development of Thermal-hydraulics Design Code for CFR600 Core

Parallelization of subchannel thermal-hydraulic code CTF of reactor core based on domain decomposition

Researches on Special Thermal Hydraulic Phenomena of Annular Fuel Assembly by Sub-Channel Analysis Code-NACAF

Development and Verification of Multiphysical Coupling Calculation Code for Typical Pressured Water Reactor Core

Development And Preliminary Verification Of The 3d Core Neutronic Code: Rcad

CorTAF: A nuclear reactor core three-dimensional thermal-hydraulic characteristics analysis code based on OpenFOAM

Development of a subchannel code for blockage accidents of LMFRs based on the 3D fuel rod model

Transient Three-Dimensional Stability Analysis of Supercritical Water Reactor Rod Bundle Subchannels by A Computatonal Fluid Dynamics Code

Analysis of the experimental tests performed at NACIE-UP facility through a novel CFX-RELAP5 codes coupling

Development of a liquid metal subchannel code applied to ocean conditions and study on the effect of core geometry parameters and ocean motions on flow and heat transfer characteristics

Thermal-Hydraulic Analysis For Experimental Device Of Supercritical Water Reactor-Fuel Qualification Test

Development and verification of tritium transport code based on RELAP5/MOD3.3 with generic model towards COOL blanket

Internal coupling between neutronics and thermal hydraulics with RMC/CTF and validation using vera benchmarks