Abstract:The piezoelectricity of the biocompatible and biodegradable polymer polylactic acid (PLA) was investigated as a potential magnetoelectric (ME) nanocomposite for biomedical applications. A key focus was to quantify the piezoelectric properties of single PLA fibers while tuning their polymer degradability through the addition of faster degrading polymer, poly (DL-lactide-co-glycolide) (PLGA), which is not a piezoelectric polymer. Piezoresponse Force Microscopy (PFM) showed that electrospun PLA fibers gave a piezoelectric response of 186.0 ± 28.1 pm. For comparison both PLA/PLGA (75/25) and PLA/PLGA (50/50) fibers gave significantly lower piezoelectric responses of 88.8 ± 12.3 pm and 49.6 ± 9.1 pm, respectively. For the highest content PLGA fibers, PLA/PLGA (25/75), only very few fibers exhibited a low response of 28.8 pm while most showed no response. Overall, an increasing PLGA content caused a decrease in the piezoelectric response, thus an expected trade-off existed between the biodegradability (i.e. PLA to PLGA content ratio) versus piezoelectricity. The findings were considered significant due to the existence of piezoelectricity in a tuneable biodegradable material that has potential to impart piezoelectric induced effects on biointeractions with the surrounding biological environment or drug interactions with the polymer to control the rate of drug release. In such applications, there is an opportunity to magnetically control the piezoelectricity and henceforth PLA/CoFe2O4 ME nanocomposite fibers with 5% and 10% of CoFe2O4 nanoparticles were also investigated. Both 5% and 10% PLA/CoFe2O4 nanocomposites gave lower piezoelectric responses compared to the PLA presumably due to the disturbance of polymer chains and dipole moments by the magnetic nanoparticles, in addition to effects from the possible inhomogeneous distribution of CoFe2O4 nanoparticles.

Regulated Crystallization and Piezoelectric Properties of Bio-Based Poly(l-Lactic Acid)/ Diatomite Composite Fibers by Electrospinning

Crystallization behavior and mechanical properties of bio-based green composites based on poly(L-lactide) and kenaf fiber

Mechanical Properties and Degradation Properties in Vitro of Carbon Fiber Reinforced Hydroxyapatite/polylactide Composite

Effects of Ionic Liquids on Piezoelectric Properties of Electrospun Poly(L-lactic Acid) Nanofiber Membranes.

THz Spectroscopy Analysis of Crystallinity Optimization for Enhanced Piezoelectricity in Biodegradable Poly-L-Lactide Acid

Characteristics of Poly (Î³-Methyl L-Glutamate)/poly (vinylidene Fluoride) Piezoelectric Fiber Composites Via Near-Field Electrospinning Process

Nanoscale piezoelectric effect of biodegradable PLA-based composite fibers by piezoresponse force microscopy

Fabrication of piezoelectric poly(l-lactic acid)/BaTiO3 fibre by the melt-spinning process

Development of Highly Crystalline Polylactic Acid with β-Crystalline Phase from the Induced Alignment of Electrospun Fibers

The Level of Alexithymia in Alcohol-Dependent Patients Does Not Influence Outcomes after Inpatient Treatment

Enhanced Piezoelectric Properties of Poly(L‐lactide) Nanocomposite Microfiber Scaffolds Due to Polydopamine‐Coating of Barium Titanate Nanoparticles

On the Nanoscale Mapping of the Mechanical and Piezoelectric Properties of Poly (L-Lactic Acid) Electrospun Nanofibers

An investigation into the polylactic acid texturization through thermomechanical processing and the improved d33 piezoelectric outcome of the fabricated scaffolds

Electrospun Environment‐Friendly Poly (L‐Lactic Acid)/CO2‐Based Polyurea Nanofiber Film for Piezoelectric Sensor

High-performance polylactic acid composites reinforced by artificially cultured diatom frustules

A review of recent advances of piezoelectric poly-L-lactic acid for biomedical applications

Filler-Enhanced Piezoelectricity of Poly-L-Lactide and Its Use as a Functional Ultrasound-Activated Biomaterial

Olfactory Function in HIV-positive Subjects

Improving dielectric properties of composites thin films with polylactic acid and PZT microparticles induced by interfacial polarization

Polylactic Acid Piezo-Biopolymers: Chemistry, Structural Evolution, Fabrication Methods, and Tissue Engineering Applications

Mechanisms for Enhancing Polarization Orientation and Piezoelectric Parameters of PVDF Nanofibers