Abstract:Ocean temperature monitoring is of great significance to marine fishing, aquaculture, and marine operations. Traditional electric sensors lack the potential to multiplex several sensors, and may suffer from electromagnetic interference. Meanwhile, fiber Bragg grating-based sensors have the advantages of high sensitivity, possibility for large-scale multiplexing, and immunity to electromagnetic interference. In this paper, we propose a Fabry–Pérot (FP) interferometer based on the draw tower grating array and combine it with the phase measurement method for demonstration and testing. In the sensor system, two adjacent fiber Bragg gratings (FBGs) are used as mirrors and an optical fiber connects them, forming a sensor unit. The signal was detected through the compensation of the optical path difference via two-arm path differences in an unbalanced interferometer. The sensor is calibrated in the range of 36.00–36.50 °C, and back to 36.00 °C, in steps of 0.10 °C. A thermocouple (DW1222) is used as a reference. Experimental testing demonstrates that under the thermal loop, the temperature and phase can be approximated as a linear relationship, the Pearson square correlation coefficient is 0.9996, and the temperature sensitivity is −9846 rad/°C. To prove that our experimental device can achieve a higher temperature resolution, we measured the background noise of the system. The experimental results indicate that the order of magnitude of our system temperature resolution can reach 10−5 °C. Thus, we believe that the sensor system is promising for the application of ocean temperature detection, and owing to the ultraweak reflection characteristics of the FBG, this method provides the possibility for large-scale multiplexing of the system.

Ultra-high-resolution and Ultra-Large-dynamic-range Fiber Temperature Sensor Based on Continuous Resonance Peaks Tracking Technique

Simultaneous Implementation of Enhanced Resolution and Large Dynamic Range for Fiber Temperature Sensing Based on Different Optical Transmission Mechanisms.

High-Resolution and Large-Dynamic Range Fiber-Optic Sensors Based on Dual-Mode Direct Spectrum Interrogation Method

Ultrasensitive Parallel Double-Fpis Sensor Based on Vernier Effect and Type II Fiber Bragg Grating for Simultaneous Measurement of High Temperature and Strain

Towards Large Dynamic Range and Ultrahigh Measurement Resolution in Distributed Fiber Sensing Based on Multicore Fiber.

Resonant fiber-optic thermometry with high resolution and wide range

Optical Fiber Sensor with Double Tubes for Accurate Strain and Temperature Measurement under High Temperature Up to 1000 °C

High Resolution Polymer/air Double-Cavity Fabry–Perot Fiber Temperature Sensor Based on Exposed Core Microstructured Fiber

High-resolution Temperature Fiber Ring Laser Sensor Based on Relative Intensity Noise Measurement

Ultrasensitive Temperature Sensor with Cascaded Fiber Optic Fabry–Perot Interferometers Based on Vernier Effect

Resonant Fiber-Optic Strain and Temperature Sensor Achieving Thermal-Noise-limit Resolution

High-Resolution Temperature Sensor Based on Single-Frequency Ring Fiber Laser via Optical Heterodyne Spectroscopy Technology

High-Resolution Optical Fiber Temperature Sensor Based on Draw Tower Grating Array

Ultrahigh-Sensitivity Temperature Sensor Based on In-Fiber Fabry-Perot Interferometer

Research on high-temperature characteristics of a miniature Fabry-Pérot cavity acoustic sensor.

Fiber ring laser sensor for temperature measurement

Fiber-Optic High-Temperature Sensor Based on Thin-Core Fiber Modal Interferometer

Ultrahigh-Resolution Fiber-Optic Sensing Using a High-Finesse, Meter-Long Fiber Fabry-Perot Resonator

A Multiparameter Sensor Based on Dumbbell-Shaped Double-Cladding Fiber Structure Cascaded Long Period Fiber Grating

An Ultra-High-resolution Large-Dynamic-range Fiber Optic Static Strain Sensor Using Pound-Drever-Hall Technique