Abstract:Additive manufacturing technique has become one of the more prominent manufacturing techniques over the years. The applications of this manufacturing technique are boundless as new process parameters of the operation affect the new structure of the components and give extended applications. The study experimentally investigates the effects of Ytterbium Laser System process parameters on the resultant microstructure of Ti-6Al-4V grade 5 alloy and reinforcement powders. The deposition process was conducted employing a 3 kW (CW) Ytterbium Laser System (YLS-2000-TR) machine, co-axial to the reinforcement powder. The laser scanning speed and power were varied between the intervals of 0.8–1.0 m/min and 900–1000 W. All other parameters kept constant were the rate of gas flow, the spot diameter, and the rate of powder flow. The composites (Ti-6Al-4V/Ti-Al-Si-Cu) produced by the DLMD technique were analysed using investigative techniques, namely, optical microscopy (OPM), scanning electron microscopy (SEM) aided with energy dispersive microscopy (EDS), X-ray diffraction analysis (XRD), microhardness testing, and corrosion rate analysis. From the analysis of the physical properties, the findings show that the geometric properties such as heat affected zone (HAZ) and dilution ratio of the composite samples were greatly impacted by the increase of the laser power of the DLMD technique, showing an increase in these attributes brought about by the interaction between the laser and the material. The addition of the copper (Cu) element enabled the movement of the copper (Cu) into the titanium (Ti) lattice structure resulting in the formation of beta titanium (β-Ti) microstructure. Increment 54.94% is associated with sample 5A which has the most enhanced microhardness of 770 HV<sub>1.0</sub>. Sample 6A had shown the most corrosion resistance improvement with 0.00062 mm/year equivalent to 31%.

Corrosion Behavior and Microstructural Effects on Passivation Film Mechanisms in Forged Ti-5Al-5Mo-5V-1Cr-1Fe Titanium Alloy under Laser Surface Remelting

Enhancing the corrosion properties and microhardness of titanium alloy by laser surface remelting

Effect of surface oxidation on wear and tribocorrosion behavior of forged and selective laser melting-based TC4 alloys

The effect of heat treatment on corrosion behavior of selective laser melted Ti-5Al-5Mo-5V-3Cr-1Zr alloy

The anisotropy of corrosion and passive behavior in selective laser melted Ti-5Al-5Mo-5 V-3Cr-1Zr alloy

Comparison on the Electrochemical Corrosion Behavior of Ti6Al4V Alloys Fabricated by Laser Powder Bed Fusion and Casting

Microstructural evolution and corrosion behavior of Ti–6Al–4V alloy fabricated by laser metal deposition for dental applications

Heat Treatment Degrading the Corrosion Resistance of Selective Laser Melted Ti-6Al-4V Alloy

Experimental study on microstructural evolution, mechanical property, and corrosion behaviour of laser additive manufactured (LAM) titanium alloy grade 5

Resemblance in Corrosion Behavior of Selective Laser Melted and Traditional Monolithic Β Ti-24Nb-4Zr-8Sn Alloy.

Corrosion and passivation behavior of laser powder bed fusion produced Ti-6Al-4V under various prior plastic deformation strains

Laser surface modification of Ti--6Al--4V: wear and corrosion characterization in simulated biofluid

Electrochemical Behavior of Laser Powder Bed Fusion (L-PBF) Ti–6Al–4V Alloy: Influence of Phase and Grain Boundaries on Surface Passive Film Formation

Laser Surface Modification Of Titanium Alloys - A Review

Corrosion behavior and mechanism of MAO coated Ti6Al4V with a grain-fined surface layer

Microstructure and Corrosion Resistance of Ti6Al4V Manufactured by Laser Powder Bed Fusion

Effect of Cryogenic Laser Surface Modification on the Microstructure Evolution and Corrosion Resistance of Accident-Tolerant FeCrAl Alloys

Material Characterization and Electrochemical Properties of Titanium Alloy 5553 Prepared by Selective Laser Melting as Processed and after Abrading and Polishing

Corrosion behavior of laser powder bed fusion additive manufacturing produced TiNi alloy by micro-arc oxidation

Comparative study of coatings with different molybdenum equivalent on titanium alloy forged plate for laser cladding: Microstructure and mechanical properties

Enhanced Protective Coatings on Ti-10V-2Fe-3Al Alloy Through Anodizing and Post-Sealing with Layered Double Hydroxides