Abstract:For lead recovery from spent LABs paste, chemical reagents consumption, lead yield, and environmental risk are crucial factors for the low‐cost sustainable development of recycled lead enterprises. Herein, a closed‐loop lead recovery strategy is demonstrated through Na2MoO4 consumption–regeneration–reuse. Noteworthily, 99.83 wt% of Na2MoO4 is reused and 95.27 wt% of Pb is recycled without generating wastewater and slags. Recycling of spent lead‐acid batteries (LABs) is extremely urgent in view of environmental protection and resources reuse. The current challenge is to reduce high consumption of chemical reagents. Herein, a closed‐loop spent LABs paste (SLBP) recovery strategy is demonstrated through Na2MoO4 consumption‐regeneration‐reuse. Experimental and DFT calculations verify that MoO42− competes Pb/Ca ions and weakens the metal‐oxygen bond of PbSO4/CaSO4.2H2O in SLBP, facilitating PbMoO4/CaMoO4 formation and 99.13 wt% of SO42− elimination. Pb of 99.97 wt% is obtained as zero‐carbon precursors (PbO2 and PbMoO4) by green leaching coupled with re‐crystallization. The regeneration of Na2MoO4 is realized at 600 °C using LABs polypropylene shells and NaOH as reagents. Compared with the traditional smelting technologies, the temperature is reduced from >1000 to 600 °C. The extraction of Na2MoO4 require only water, and satisfactory re‐used desulfurization efficiency (98.67 wt%) is achieved. For the residual Na2MoO4 after first SLBP desulfurization, the desulfurization efficiency remains above 97.36 wt% after adding fresh reagents for two running cycles. The new principle enables the reuse of 99.83 wt% of Na2MoO4 and the recycling of 95.27 wt% of Pb without generating wastewater and slags. The techno‐economic analysis indicates this strategy is efficient, economical, and environmentally‐friendly.

Synthesising Lead Oxide and Oxychloride Minerals from Spent Lead Acid Battery Waste using a Choline-Chloride based Deep Eutectic Solvent

Lead acid battery recycling for the twenty-first century

The Recovery of Lead from Spent Lead Acid Battery Paste by Electrodeposition in Deep Eutectic Solvent

Recovery of Residual Lead from Automotive Battery Recycling Slag Using Deep Eutectic Solvents

Preparation of High Purity Lead Oxide from Spent Lead Acid Batteries via Desulfurization and Recrystallization in Sodium Hydroxide

Deep eutectic solvent for spent lithium-ion battery recycling: comparison with inorganic acid leaching

Chemical-Free Method for Recovery of Lead from Spent Lead Paste by Reductive Sulfation Technique from By-product Utilization

An innovative synergistic recycling route of spent lead paste and lead grid based on sodium nitrate reuse

The Pitfalls of Deep Eutectic Solvents in the Recycling of Lithium‐Ion Batteries

Analysis of a more sustainable method for recycling waste lead batteries: Surface renewal promotes desulfurization agent regeneration

Reconstruction of Lead Acid Battery Negative Electrodes after Hard Sulfation Using Controlled Chelation Chemistry

Efficient Desulfurizer Recycling during Spent Lead–Acid Batteries Paste Disposal by Zero‐Carbon Precursor Hypothermic Smelting

Efficient Desulfurizer Recycling during Spent Lead-Acid Batteries Paste Disposal by Zero-Carbon Precursor Hypothermic Smelting

From Lead Paste to High-Value Nanolead Sulfide Products: A New Application of Mechanochemistry in the Recycling of Spent Lead–Acid Batteries

High-efficiency leaching of valuable metals from waste Li-ion batteries using deep eutectic solvents

Decomposition of Deep Eutectic Solvent Aids Metals Extraction in Lithium‐Ion Batteries Recycling

A new desulfation process of spent lead paste via cyclic utilization of CO2–NH3·H2O

Progress in Waste Lead Paste Recycling Technology from Spent Lead–Acid Battery in China

Directly Recovering Lead and Recycling Electrolyte via Electrolyzing Desulfurized Lead Paste with PVDF as Binder

Ultrasonic-Assisted Synthesis of Lead Citrate as Precursor for Preparation of Lead Oxide from Lead Sulfate

Pollution-free Recycling of Lead and Sulfur from Spent Lead-Acid Batteries Via a Facile Vacuum Roasting Route