Abstract:The present work proposes an enhanced method of investigation and optimization photovoltaic (PV) modules by approaching and using MPPT (Maximum Power Point Tracking) technique to improve their output power. The performance of the PV panels is strongly influenced by the operating conditions, especially regarding the solar irradiance, temperature, configuration, and the shading (due to a passing cloud or neighboring buildings); all these cause, both on energy conversion loss, and further on non-linearity of the I-V characteristics. From this reason, the present study could have a high relevance based on the improvement of the performances (including the efficiency) of the shaded photovoltaic panels and would quantify the impact of a complex approach represented by numerical modeling and experimental validation. For a better understanding of these issues determined by partial shading, and improvement of MPP tracking, it is required to study the behavior of individual panels. For the best accuracy of the implemented models a comparative analysis and optimized method of the PV modules was considered based on: (1) the influence of temperature and solar irradiance and behavior of the PV modules in partial shading conditions; (2) a comparison between the optimized output power of four algorithms (FLC—Fuzzy Logic Controller, P&O—Perturb and Observe, IncCond—Incremental Conductance and RC Ripple Correlation) and the selection of the best one (FLC); (3) discussion of customized/improved fuzzy logic controller (FLC) algorithm on five operation points introduced in order to increase PV module efficiency under fluctuating weather conditions and rapidly changing uncertainties. Furthermore, the FLC provides a set of rules useful for predicting the current-voltage behavior and the maximum power points of shaded photovoltaic modules. This FLC algorithm was implemented in a specialized software, namely MATLAB/Simulink. The authors highlighted the development and implementation of a numerical simulation model for an advanced PV module to determine its behavior under different operating conditions and improve its performance. The essence of the authors' research and the motivation of this work is described. The authors were able to stabilize and improve the output performance of the PV module. The results concerning the shading effect as well as the shading patterns were developed, demonstrated, and experimentally validated. These results could be applied for the actual photovoltaic installations, respectively complex stand-alone or grid-connected photovoltaic systems.

A Novel Data-driven State Evaluation Approach for Photovoltaic Arrays in Uncertain Shading Scenarios

A Novel Methodology for Partial Shading Diagnosis Using the Electrical Parameters of Photovoltaic Strings

Shading type and severity diagnosis in photovoltaic systems via I-V curve imaging and two-stream deep neural network

A Novel Fault Diagnosis Scheme for PV Plants Based on Real-Time System State Identification

Intelligent fault diagnosis of photovoltaic array based on variable predictive models and I–V curves

Shading Fault Detection Method for Household Photovoltaic Power Stations Based on Inherent Characteristics of Monthly String Current Data Mapping

Identification of Abnormal PV Output Power Based on kernel Density Estimation and Consistency Method

A Fast MPPT-based Anomaly Detection and Accurate Fault Diagnosis Technique for PV Arrays

Performance Assessment of Mismatch Mitigation Methodologies Using Field Data in Solar Photovoltaic Systems

A Novel Operating State Evaluation Method for Photovoltaic Strings Based on TOPSIS and Its Application

Research on real-time identification method of model parameters for the photovoltaic array

Photovoltaic Systems Status Monitoring Utilizing Machine Learning Technique

A novel soft sensing method using intelligent modeling method for solar irradiance and temperature in distributed PV power plant

Modeling and Global Maximum Power Point Tracking for Photovoltaic System under Partial Shading Conditions Using Modified Particle Swarm Optimization Algorithm

Fast simulation modeling and multiple-PS fault diagnosis of the PV array based on I–V curve conversion

Performance evaluation of different photovoltaic array configurations under partial shading

Parameter Estimation and Preliminary Fault Diagnosis for Photovoltaic Modules Using a Three-Diode Model

Health status evaluation of photovoltaic array based on deep belief network and Hausdorff distance

Power Output Monitoring and Anomaly Identification of Photovoltaic Systems Using Graphical Modeling

Investigation of the Partial Shading Effect of Photovoltaic Panels and Optimization of Their Performance Based on High-Efficiency FLC Algorithm

An Improved Generalized Method for Evaluation of Parameters, Modeling, and Simulation of Photovoltaic Modules