Abstract:Synthesis of nanocomposites is challenging due to the difficulties in achieving homogeneous distribution of reinforcing particles in metal. In this paper, an in‐situ Al‐MgAl2O4 nanocomposite billet was prepared by the reaction of ɣ‐Al2O3 with molten Al and ultrasonication‐assisted impeller mixing. The microstructure of the composite showed homogeneously distributed MgAl2O4 crystals alongside their clusters in the Al matrix. Microstructural analysis revealed MgAl2O4 crystals distributed from 20 nm to 4 μm in size. The hardness was found to vary within the composite from 50 Hv for the matrix to 140 Hv for particle cluster regions. The grain size was reduced from 1000 μm in reference metal (CP Al) to 100 μm in the composite. The compression strength of the composite was increased substantially and higher strain hardening effect in comparison with Al was noticed in the compression test. The signatures of extensive plastic deformation such as dislocation pileups, deformed grains, grain boundary pinning etc. were observed in the composite via transmission electron microscopy. Damping properties of as‐cast composite were higher than those of CP Al in the temperature range from room temperature to 350 °C. After rolling the composite up to 40% reduction, the damping capacity (Tanδ) of the composite was found to increase marginally after 150 °C. Higher damping was found to reoccur after the annealing treatment of the composite. The improvement in damping capacity at RT was possibly influenced by the micron sized MgAl2O4 and at higher temperatures by the nano‐sized MgAl2O4 crystals. The reoccurrence of higher damping in the annealed composite underlined the stability of finer grains due to the grain boundary pinning by nano‐sized MgAl2O4 crystals. The studies on the damping property of the composite displayed the benefits of having dual size distribution of MgAl2O4 crystals (nm and μm) in the composite. This article is protected by copyright. All rights reserved.

Damping Properties and Mechanism of Aluminum Matrix Composites Reinforced with Glass Cenospheres

Damping Properties of Aluminium Matrix Cenosphere Composite

Quasi-static compressive properties and damage behavior of aluminum matrix syntactic composites with different diameters of glass cenospheres

Microstructure and Damping Behavior of Continuous W-Core-SiC Fiber-Reinforced Aluminum Matrix Composites

Properties and application of cenophere/aluminum composites

Damping properties of aluminum matrix–fly ash composites

Strengthening Mechanism and Damping Properties of SiCf/Al-Mg Composites Prepared by Combining Colloidal Dispersion with a Squeeze Melt Infiltration Process

Damping characterization and its underlying mechanisms in CNTs/AZ91D composite processed by cyclic extrusion and compression

Damping Capacity of the Al Matrix Composite Reinforced with SiC Particle and TiNi Fiber

Study on damping behavior of Gr/Mg composites

High damping and modulus of aluminum matrix composites reinforced with carbon nanotube skeleton inspired by diamond lattice

Damping capacity of pure magnesium matrix composites

Damping capacity of hollow ceramic particle/Al composites

Improving mechanical and thermal expansion properties of aluminum matrix composites reinforced by silicon carbide fiber

Boosting energy absorption performance of aluminum matrix syntactic foam with carbon coated glass cenospheres

Damping capacity of amorphous carbon fiber/aluminum matrix composites at room temperature

Damping performance of SiC nanoparticles reinforced magnesium matrix composites processed by cyclic extrusion and compression

Damping and mechanical properties of SiC particles reinforced aluminium matrix composites prepared by colloidal dispersion and suction filtration method

(Aln + Mg2si)/Mg Composites in Situ Synthesis and Scale Effect of Particulate on Damping Capacity

Damping Capacities and Microstructures of Magnesium Matrix Composites Reinforced by Graphite Particles

Microstructural evolution and property evaluation of in‐situ Al‐MgAl2O4 nanocomposite prepared by ɣ‐Al2O3 and ultrasonication‐assisted impeller mixing