Abstract:Sandwiched type flexural piezoelectric transducers are used in many applications due to their excellent output performances. However, the design and manufacture of traditional sandwiched type flexural piezoelectric transducers always have specific requirements on the flexural piezoelectric ceramics with complex polarizations and configurations, seriously limiting their applications. To reduce these special requirements, a novel sandwiched type flexural piezoelectric transducer in which common rectangular piezoelectric plates with a single polarization are adopted is proposed in this paper. By applying excitation signals with different temporal phases to the rectangular piezoelectric plates, the proposed transducer features the ability to generate flexural vibration, longitudinal vibration, and composite longitudinal-flexural vibration. To lower the computational efforts of the finite element analysis, a general systematic electromechanical model is carried out for the proposed transducer utilizing the transfer matrix method. The developed systematic transfer matrix model provides an available approach for simultaneously coupling the mechanical and electrical properties to adequately reveal the dynamic behavior of the proposed transducer operating in flexural vibration mode. To validate the proposed model, dynamic behaviors of the sandwiched piezoelectric transducer in flexural vibration are calculated and compared with the finite element simulation results. The results demonstrate that the proposed transfer matrix model is valid and effectively reduces the computational efforts. In addition, vibration characteristics of the transducer prototype are experimented, and results verified the feasibility of the transducer design and the effectiveness of the developed transfer matrix model. (C) 2018 Elsevier Ltd. All rights reserved.

Array Equivalent Circuit Model and Experimental Analysis of Square CMUTs

Equivalent Circuit Analysis of CMUTs-based Device for Measurement in Liquid Samples

Modeling and Optimization of CMUTs Arrays for Improved Transmission and Reception Performance in Immersion

Equivalent Circuit Analysis with Experimental Verification for Barrel-Stave Flextensional Transducers and Arrays.

An Equivalent Circuit Model with Current Return Path Effects for On-Chip Interconnect Up to 80 Ghz

Three-solenoid Windings Transformer Baluns on CMOS-grade Silicon Substrate

A Computationally Efficient Nonlinear Dynamic Model for Cmut Based on COMSOL and MATLAB/Simulink

Calculation Of Equivalent Parameters In Cmut 1-D Theoretical Model

A 1-D Lumped Theoretical Model for CMUT

Design and Simulation of a Wide-Bandwidth CMUTs Array with Dual-Mixed radii and Multi Operating Modes

Equivalent Physical Model of Modular Multilevel Converter Considering Internal Dynamics

Equivalent Circuit Models of Cell and Array for Resonant Cavity-Based Piezoelectric Micromachined Ultrasonic Transducer

Equivalent Circuit Model for a Large Array of Coupled Piezoelectric Micromachined Ultrasonic Transducers With High Emission Performance

Systematic Electromechanical Transfer Matrix Model of a Novel Sandwiched Type Flexural Piezoelectric Transducer

A 1-D Theoretical Receiving Model for CMUT

Lumped Element Model for CMUTsBased Biochemical Resonant Sensor

Analytical Modeling of CMUTs in Coupled Electro-Mechano-Acoustic Domains Using Plate Vibration Theory

Radiation Impedance of Rectangular CMUTs

3D FEM Analysis of High-Frequency AlN-Based PMUT Arrays on Cavity SOI

Experiment and simulation validated analytical equivalent circuit model for piezoelectric micromachined ultrasonic transducers

In-plane-sensing Analysis of Comb-like Capacitive Micro-machined Ultrasonic Transducers (CMUTs) Using Analytical Small-signal Model and FEM