Pore Fluid Chemistry Effects on the Swelling Behavior of Compacted GMZ Bentonite with an Artificial Annular Gap
Luo H. W.,Ye W. M.,Wang Q.,Chen Y. G.,Chen B.
DOI: https://doi.org/10.1007/s10064-021-02299-y
IF: 4.2
2021-01-01
Bulletin of Engineering Geology and the Environment
Abstract:Deep geological disposal has been adopted by many countries around the world as a method for disposal of high-level radioactive waste. During the construction and long-term operation of the repository, working as buffer/backfill materials, bentonite will hydrate and swell to fill up various voids in the repository including artificial gaps between canister and compacted bentonite blocks, blocks and blocks, blocks and natural barrier (host rock), etc. More importantly, this closure process will be inevitably affected by groundwater and its chemistry infiltrated. In this study, hydration tests with infiltration of solutions were conducted on GMZ bentonite specimens with artificial annular gaps. The hydration process was monitored by a camera, and the digital images taken were analyzed. Results show that the hydration process for highly compacted GMZ bentonite specimens with an annular gap can be divided into three phases, which can be identified by the development of cracks on the surface of the specimen. In the first phase, bentonite swells and gel generates upon hydration with gradually filling up of the annular gap. While in the second phase, cracks are observed in the center part on the specimen surface, and in the last phase, cracks gradually close up, and eventually disappear accompanied by macroscopic homogenization of the specimen. Different from that for the specimens infiltrated with deionized water, a more rapidly filling up of the artificial annular gap is observed for the specimens injected with salt solutions. Furthermore, with increasing concentration, both of the quantity and width of the cracks formed obviously decrease due to the reduction of both the DDL thickness and electrostatic repulsion forces. Meanwhile, with comparison to that infiltrated with NaCl solutions, a smaller scale of cracks is observed in the dry central part of the specimen infiltrated with CaCl 2 solution. Finally, time consumed to reach the macroscopic homogeneous state for the specimen infiltrated with salt solutions is much shorter than that infiltrated with deionized water. Meanwhile, the time required for the specimen infiltrated with CaCl 2 solution is shorter than that injected with NaCl solution. Results of the investigation on pore fluid chemistry effects on the swelling behavior of compacted GMZ bentonite with an artificial annular gap could be used for estimation of the sealing effects and time of the technological gaps in the disposal repository, as well as to provide reference for the design and even the final performance evaluation of the engineering barrier system.