Abstract:With the improvement of modern aircraft performance, thermal management has become increasingly challenging. The power and thermal management system (PTMS) proposed by Honeywell is an integrated approach to solve this problem. Although the PTMS has inevitable mass and energy interactions with the engine, the existing PTMSs are usually designed based on limited flight states without considering the full engine condition. Therefore, we first propose a novel integrated model combining PTMS and engine based on a semi-precise heat exchanger submodule. Parametric analysis is conducted to find out the impact of the engine and PTMS design variables on the propelling and cooling performance of the integrated system, and energy and exergy analyses are adopted to evaluate the degree of coupled effects between PTMS and engine over the whole flight envelope. Results show that the influence of FAN and HPC pressure ratio on refrigerating performance is more significant than the bypass ratio and inlet temperature of HPT at the design point. The cooling efficiency of PTMS is improved by 4.1% and 1.2%, respectively, as the pressure of HPC and FAN rises by 50%. Besides, the refrigerating performance of PTMS gradually weakens with the increasing flight Mach number, while the cooling efficiency reduces by 50% as the Mach number increases from 0 to 1.8. This trend indicates that the working condition and flight environment of the engine need to be considered in the design process of the PTMS system. As for the control variables of PTMS, the refrigerating efficiency of PTMS decreases by 60% when the pressure ratio of PTMS compressor (PTMS_COMP) changes from –33.3% to 33.3%. Inconsistently, the refrigerating efficiency shows a positive correlation with the heat transfer capacity of the kerosene heat exchanger (PTMS_KEHEX) and primary heat exchanger (PTMS_PRHEX). Meanwhile, the impact of the second heat exchanger (PTMS_SEHEX) on the cooling performance of PTMS can be neglected. Above all, in future PTMS designs, the influences of the pressure ratio of PTMS_COMP, the heat transfer capacity of PTMS_KEHEX and PTMS_PRHEX, as well as the engine control variables need to be considered simultaneously.

Performance Analysis of a New Precooled Engine Cycle Based on the Combined Pre-Compressor Cooling with Mass Injection and Heat Exchanger

Thermodynamic analysis for a novel chemical precooling turbojet engine based on a multi-stage precooling-compression cycle

Performance comparison of three chemical precooled turbine engine cycles using methanol and n-decane as the precooling fuels

Performance Analysis of a Novel Hybrid Vapor Injection Cycle with Subcooler and Flash Tank for Air-Source Heat Pumps

Parametric Optimization and Exergy Analysis of a High Mach Number Aeroengine with an Ammonia Mass Injection Pre-Compressor Cooling Cycle

Performance evaluation and optimization for a novel supersonic precooled engine based on hydrogen production technology from ammonia cracking

Numerical Investigation of the Intercooler Performance of Aircraft Piston Engines under the Influence of High Altitude and Cruise Mode

Simulation and Experimental Research on a Mixed Pulse Converter Turbocharging System

Evaluation of Mass Injection Cooling on Flow and Heat Transfer Characteristics for High-Temperature Inlet Air in a MIPCC Engine

Assessment of thermodynamic performance and CO 2 emission reduction for a supersonic precooled turbine engine cycle fueled with a new green fuel of ammonia

Optimization of combustion organization scheme for pre-combustion chamber of pre-cooled engine

Modeling and Performance Analysis of a Pre-Cooling and Power Generation System Based on the Supercritical CO2 Brayton Cycle on Turbine-Based Combined Cycle Engines

Study on the Effects of Structural Parameters of the Pre-Cooler on the Performance of Combined Power Generation Engines

Performance assessment for a novel supersonic turbine engine with variable geometry and fuel precooled: From feasibility, exergy, thermoeconomic perspectives

Performance evaluation of multicombustor engine for Mach3+-Level propulsion system

Analysis of energy cascade utilization in the chemically precooled engine cycle from a perspective of indirect combustion

Study on Mixed Pulse Converter (mixpc) Turbocharging System and Its Application in Marine Diesel Engines

Performance Analysis and Dynamic Optimization of Integrated Cooling and Power Generation System Based on Supercritical CO2 Cycle for Turbine-Based Combined Cycle Engine

Study on performance and mechanisms of a novel integrated model with Power & Thermal Management system and turbofan engine

Experimental Measurement and Analysis of Performance of Heat Pipe Heat Exchanger Used in a Turbocharged Engine with Intercooling

Enhancement of the precooling system performance for aviation engines by volatile liquid injection