Abstract:In general, there is a scarcity of practical information currently accessible regarding the bonding characteristics of FRP bars within concrete, and existing guidelines for the design and construction of concrete structures reinforced with FRP, such as ACI 440.1R-15, do not provide equations for different FRP bars, especially when mechanical anchors are used along the bar length. Moreover, the currently available data are from pull-out tests, the reliability of which has been questioned due to unrealistic stress conditions. This paper examines the bond behavior of GFRP bars equipped with mechanical steel anchors through a series of tests on beam specimens. Variables include the diameter of GFRP bars and the compressive strength of concrete as well as the length and thickness of the anchors. The main output parameters under consideration are the maximum transferred stress in the bar, the initial slope of the transferred stress-slip graph, and stress at the initiation of the slip. All investigated steel anchors with different lengths and thicknesses were observed to improve the bond behavior. The rise in the maximum transferred stress due to using anchors ranged between 15% and 60%, depending on the compressive strength of the concrete, GFRP bar diameter, and length and thickness of the steel anchor. The stress at the initiation of the bar slip and the initial bond stiffness were also noticeably greater in specimens containing the anchor compared to those without the anchor. Increasing the anchor length was more effective than the anchor thickness in improving the bond behavior. Based on the experimental results, equations were proposed to predict the values of stress at the first peak of the transferred stress-slip graphs and maximum transferred stress in the bar as a function of the anchor length, anchor diameter, compressive strength of concrete, and diameter of the GFRP bar, which show satisfactory performance in comparison with experimental data.

Bond Mechanism of Grout Sleeve Splicing for Steel-Frp Composite Bar and Pullout Behavior of the Bar with Anchor Head in Concrete

Grout Sleeve Splicing of Steel-Fiber Reinforced Polymer Composite Bars: Tensile Behavior and Bond Mechanism

Pullout behavior of the steel-FRP composite bar with the anchor head made of the grout-filled steel tube

Bond performance between SFCBs and grouted sleeves for precast concrete structures

Experimental Investigation on Influence of Embedment Length, Bar Diameter and Concrete Cover on Bond Between Reinforced Bars and Steel Fiber Reinforced Concrete (SFRC)

Pull-Out Behavior of CFRP Bars in Glued-In Glubam Joints

Study on Bond-Slip Behavior between Seawater Sea-Sand Concrete and Carbon Fiber-Reinforced Polymer (CFRP) Bars with Different Surface Shapes

Bond Properties of Steel Angles in Concrete Filled Steel Tubes

Bond Performance of CFRP Strands to Grouting Admixture for Prestressed Structure and Development of Their Bond-Slip Constitutive Models

Experimental study of the bond behavior of 400MPa grade hot-rolled ribbed steel bars in steel fibre reinforced concrete

Experimental Study on Bond Performance of Carbon- and Glass-Fiber Reinforced Polymer (CFRP/GFRP) Bars and Steel Strands to Concrete

Field test of GFRP bar anti-floating anchor slurry-rock interface bonding performance

Bond Behavior of GFRP/Steel Wire Composite Rebars Experimental Study

Bond behavior between steel bar and engineered cementitious composite (ECC) considering lateral FRP confinement: Test and modeling

Bond–Slip Law Between Steel Bar and Different Cement-Based Materials Considering Anchorage Position Function

Experimental Study and Modeling on Bond-Slippage Behavior of Steel Bar in Polyvinyl Alcohol-Steel Hybrid Fiber Engineered Cementitious Composite

Experimental Bond Behavior of Deformed Rebars in Half-Grouted Sleeve Connections with Insufficient Grouting Defect

Bond performance of GFRP bars with mechanical steel anchors using RILEM beam bond tests: Experimental and theoretical study

Bond performance of GFRP bars embedded in steel‐PVA hybrid fiber concrete subjected to repeated loading

Research on the Bond Performance Between Glass Fiber Reinforced Polymer (GFRP) Bars and Ultra-high Performance Concrete(uhpc)

Experimental and theoretical study on bond behavior of helically wound FRP bars with different rib geometry embedded in ultra-high-performance concrete