Abstract:Furfurylation is an effective and green method for wood or bamboo modification that can significantly improve its physical and mechanical properties and the resistance against biological deterioration and the attack of subterranean termites. To elucidate the effect of furfurylation on the physical and multiscale mechanical properties of bamboo, the conditions of the furfurylation process were modified to cause an independent variation of the physical and multiscale mechanical properties in differently-treated bamboo samples. This was achieved by impregnating bamboo samples with solutions containing 15%, 30%, 50%, or 70% furfuryl alcohol (FA) by either of the two impregnation processes, vacuum pressure (V-P) and soaking (S) impregnation, while applying different curing conditions (wet- or dry-curing). The physical properties we measured included the absorption rate, weight percent gain (WPG), swelling efficiency (SE), and anti-swelling efficiency (ASE); the macro-mechanical properties involved the modulus of rupture (MOR), the modulus of elasticity (MOE), parallel-to-grain compressive strength (CS), and tensile strength (TS); the micro-mechanical properties included the tensile strength of bamboo's vascular bundle and hardness and the indentation modulus of bamboo's fiber cell walls. Finally, the correlation between the different physical and mechanical properties of the modified bamboo samples was analyzed. The results indicate that V-P impregnation made bamboo more permissible for the penetration of FA, while wet-curing was more conducive to ensuring a high curing rate. The dimensional stability of the bamboo samples treated with a high FA concentration through V-P impregnation and of those furfurylated by the S-Wet process using either medium or high FA concentrations was significantly increased. However, the dimensional stability of the bamboo samples modified with either low or medium FA concentrations decreased in both dry and wet curing. In terms of mechanical strength, furfurylation had little effect on the macro- and micro-mechanical properties of bamboo and was slightly improved in comparison to untreated samples. The results also showed a positive correlation between the macro- and micro-mechanical strength of the modified bamboo samples and a significant negative correlation between the mechanical strength and ASE. In soaking impregnation, the WPG and ASE were positively correlated, while the WPG and CS were negatively correlated. Interestingly, the correlation between the mechanical properties and ASE was not significant. Finally, both V-P-Wet and S-Wet approaches can be recommended for bamboo furfurylation, the former being time-saving and having a high curing rate in FA resin while significantly improving the moisture absorption and mechanical strength of bamboo. The advantage of the latter process is simplicity, a high utilization rate of FA, and a significant improvement in the dimensional stability of bamboo.

Citral Encapsulated into a Zeolite Imidazolate Framework-67 (ZIF-67) Cage Via Biomimetic Mineralization As an Efficient Preservative for Long-Term Antimildew Efficacy of Bamboo

Inhibition mechanism and antibacterial activity of natural antibacterial agent citral on bamboo mould and its anti-mildew effect on bamboo

Investigation of the Release Mechanism and Mould Resistance of Citral-Loaded Bamboo Strips

Preparation Of Uniformly Dispersed N-Isopropylacrylamide/Acrylic Acid/Nanosilver Composite Hydrogel And Its Anti-Mold Properties

The Influence of Impregnation Methods and Curing Conditions on the Physical and Multiscale Mechanical Properties of Furfurylated Bamboo

Antioxidant-Mediated Modification of Citral and Its Control Effect on Mildewy Bamboo

Lignin-polyurea/luffa seed oil microcapsules for anti-mold modification of bamboo

Fabrication of core–shell type poly(NIPAm)-encapsulated citral and its application on bamboo as an anti-molding coating

Advanced bamboo composite materials with high-efficiency and long-term anti-microbial fouling performance

Microcapsules of chitosan-loaded luffa seed oil for improving the mold-resistance of bamboo

Citral-loaded chitosan/carboxymethyl cellulose copolymer hydrogel microspheres with improved antimicrobial effects for plant protection

Anti-mildew effect and inhibition mechanism of the slightly acidic electrolyzed water treatment of bamboo

Immobilization of Cu2+ enhances the anti-mould properties of bamboo by addition of ZnO nanoparticles

Mold Resistance of Bamboo after Laccase‐Catalyzed Fixation of Lignin Nanoparticles

Improving the hydrophobicity, dimensional stability and mold resistance of bamboo by paraffin/microcrystalline wax/stearic acid modification

Excellent anti-mildew effect of essential oil impregnation on sliced veneer plybamboo and its anti-mildew mechanism

PREPARATION AND PERFORMANCE OF ANTI MILDEW GLUED LAMINATED BAMBOO

Improving the Mould and Blue-Stain-Resistance of Bamboo through Acidic Hydrolysis

Improved Dimensional Stability and Mold Resistance of Bamboo via In Situ Growth of Poly(Hydroxyethyl Methacrylate-N-Isopropyl Acrylamide)

Enhanced durability of round bamboo treated with copper naphthenate under heat-cold impregnation

Preparation of ZIF‐8/natural Plant Fiber Composites Via Biomimetic Mineralization for Highly Efficient Removal of Formaldehyde