Abstract:Cracks developed in concrete infrastructure are one of the primary mechanisms that degrade their structural integrity, which may result in structural failures. Previous research on soft elastomeric capacitors (SEC) has shown their viability for structural health monitoring of structural materials, including concrete, steel, and fiberglass composites. The SEC, or its derivative version with a corrugated geometry termed corrugated SEC or cSEC, is a parallel plate capacitor. Prior work demonstrated that it was possible to directly paint the electrode interfacing with the structural material onto the structure and adhere the rest of the pre-fabricated sensor onto the wet interface, thereby eliminating the need for a joining epoxy. This demonstration was conducted on steel and fiberglass. The study on concrete was left to future work as concrete exhibits a much rougher surface and structure/sensor capacitive coupling, causing a significant amplification in signal noise. This study advances structural health monitoring in concrete applications by investigating the in situ assembly of the SEC on concrete where the carbon black (CB)-based electrode plate of the cSEC is directly painted onto the concrete surface and serves as both the adhesive and electrode for the sensor. A series of free-vibration and compression tests were designed and conducted to evaluate the sensing performance of in situ assembled cSEC compared to that of an epoxy-bonded cSEC. Additionally, the bonding strength of the in situ assembled and epoxy-bonded cSEC is evaluated through a peel test. Results show good strain sensing capabilities of the in situ assembled SEC with an R value of 0.986 and a resolution of 45~ . Even though the epoxied cSEC demonstrated a higher bonding strength than the in situ assembled cSEC, the in situ assembled cSEC demonstrated adequate bonding strength for the application. This research contributes to the scientific understanding of sensor adhesion and opens avenues for practical applications in infrastructure monitoring, potentially leading to more resilient and sustainable urban environments.

Coupling Performance of the Interface Between Sensor and Concrete by the Double Shear Method

Experimental Study on Interface Performance Between Implantable Cement-Based Sensor and Matrix Concrete

Bond shear performances and constitutive model of interfaces between vertical and horizontal filaments of 3D printed concrete

Shear-friction behavior of concrete-to-concrete interface under direct shear load

Synergistic Design of Mechanical Properties Between Implantable Sensor and Concrete Based on Three-Dimensional Refined Numerical Model

Interface Monitoring Of Steel-Concrete-Steel Sandwich Structures Using Piezoelectric Transducers

Numerical Analysis on Design and Application of Cement-Based Sensor for Structural Health Monitoring

Experimental Investigation on Damage of Concrete Beam Embedded with Sensor Using Acoustic Emission and Digital Image Correlation

Experimental Study on Direct Shear Performance of Concrete-Concrete Interface of Prefabricated Structure Sleeve Grouting Connection

An Optical Fiber Sensor Method for Simultaneously Monitoring Corrosion and Structural Strain Induced by Loading

Interfacial Debonding Detection for Steel-Concrete Composite Structures Part I: Benchmark Test and Signal Calibration of Contact and Non-Contact Measurement

Experimental and Numerical Study on the Microstructure and Chloride Ion Transport Behavior of Concrete-to-concrete Interface

Experimental Investigation on Shear Behavior of the Interface between Early-Strength Self-Compacting Shrinkage-Compensating High-Performance Concrete and Ordinary Concrete Substrate

Sand-Steel Interface Behaviour Under Large-Displacement And Cyclic Shear

Experimental research on bonding mechanical performance of the interface between cementitious layers

Interfacial Debonding Detection for Steel-Concrete Composite Structures Part II: Scanning Doppler Laser-Based MASW and Microphone Combination-Based Impact-Acoustic Vibration

Bond slip detection of concrete-encased composite structure using shear wave based active sensing approach

Experimental investigation on interfacial defect detection for SCCS with conventional and novel contact NDT techniques

Interfacial Effect on Quantitative Concrete Stress Monitoring Via Embedded PZT Sensors Based on EMI Technique

Shear interfacial fracture of strain-hardening fiber-reinforced cementitious composites and concrete: A novel approach

In situ assembly enabling adhesive-free bonding of large area electronic sensors to concrete for structural health monitoring