Abstract:Recovering gold from wastewater has both economic and environmental benefits. However, how to effectively recover it is challenging. In this work, a novel Fe-based metal-organic framework (MOF) was synthesized and decorated with 2,5-thiophenedicarboxylic acid to have a well-developed porous architecture to effectively recover Au(III) from water. The maximum Au(III) sorption capacity by the finally-synthesized porous material MIL-101(Fe)-TDCA reached 2350 mg/g at pH = 6.00 ± 0.15, which is one of the highest among all literature-reported relevant materials including MOFs, and high sorption strength can be maintained within a wide pH range from 2.0 to 10.0. Besides, Au(III) sorption efficiency at low concentrations (i.e., 3.5 × 10−4 mg/mL) reached over 99 %. Mechanically, outstanding Au(III) sorption by MIL-101(Fe)-TDCA resulted from the O/N/S-containing moieties on its surface, large surface area and porosity. The N- and S-containing functionalities (CS, CONH) served as electron donors to chelate Au(III). The O-containing (FeOFe, COFe, COOH, and coordinated H2O) and N-containing (CONH) moieties on MIL-101(Fe)-TDCA interacted with OH groups on the hydrolyzed species of Au(III) (AuCl3(OH)−, AuCl2(OH)2−, and AuCl(OH)3−) by hydrogen bond, which further increased Au(III) sorption. Furthermore, about 45.71 % of Au(III) was reduced to gold nanoparticles by CS groups on the decorated 2,5-dithiophene dicarboxylic acid during sorption on MIL-101(Fe)-TDCA. Over 98.35 % of Au(III) was selectively sorbed on MIL-101(Fe)-TDCA at pH 4.0, much higher than that of the coexisting heavy metal ions including Cu(II), Zn(II), Pb(II), and Ni(II) (<5 %), despite their same concentration at 0.01 mg/mL. Although sorption selectivity of a noble metal Pt(IV) by MIL-101(Fe)-TDCA is relatively poor (68.23 %), it could be acceptable. Moreover, reusability of MIL-101(Fe)-TDCA is also excellent, since above 90.5 % Au(III) still can be sorbed after two sorption-desorption cycles. Overall, excellent sorption performance and the roughly-calculated gold recycling benefits (26.30 %) highlight that MIL-101(Fe)-TDCA is a promising porous material for gold recovery from the aqueous phase.

Flexible MOF@fabrics Composites: the In-Situ Growth of Metal-Organic Frameworks on Cotton and Selectively Adsorption of Gold(iii) from Aqueous Solution

In Situ Growth of a Stable Metal-Organic Framework (MOF) on Flexible Fabric via a Layer-by-Layer Strategy for Versatile Applications.

Versatile Crosslinking Synthesis of an EDTA-modified UiO-66-NH2/cotton Fabric Composite for Simultaneous Capture of Heavy Metals and Dyes and Efficient Degradation of Organophosphate.

Heavy Metal Elimination Based on Metal Organic Framework Highly Loaded on Flexible Nanofibers.

Facile Fabrication of Robust MOF Membranes on Cloth Via a CMC Macromolecule Bridge for Highly Efficient Pb(II) Removal

In Situ Growth of Zr-based Metal-Organic Frameworks on Cellulose Sponges for Hg2+ and Methylene Blue Removal

Carboxylic Acid Modulated in Situ Growth of Zr-based MOFs on Carboxylated Cotton Fabrics for Removal of Cr(VI) from Aqueous Solutions

Hydrophilic Carboxyl Cotton for in Situ Growth of UiO-66 and Its Application As Adsorbents

Scalable multifunctional MOFs-textiles via diazonium chemistry

Synthesis of cellulose cotton-based UiO-66 MOFs for the removal of rhodamine B and Pb(II) metal ions from contaminated wastewater

Synthesis of a bifunctional metal-organic framework membrane for the removal of anionic and cationic heavy metals from wastewater

In situ growth of Zr-based metal-organic frameworks on cellulose sponges for Hg 2+ and methylene blue removal

Magnetic Zr-Based Metal-Organic Frameworks: A Highly Efficient Au (III) Trapper for Gold Recycling

Decorating Metal Organic Framework on Nickel Foam for Efficient Cu2+ Removal Based on Adsorption and Electrochemistry.

Highly efficient metal-organic frameworks adsorbent for Pd(II) and Au(III) recovery from solutions: Experiment and mechanism

Preparation of Magnetic Metal-Organic Frameworks with High Binding Capacity for Removal of Two Fungicides from Aqueous Environments

An O/N/S-rich porous Fe-based metal-organic framework (MOF) for gold recovery from the aqueous phase with excellent performance

Magnetic Zr-MOFs Nanocomposites for Rapid Removal of Heavy Metal Ions and Dyes from Water

In-situ Growing of Metal-Organic Frameworks on Three-Dimensional Iron Network As an Efficient Adsorbent for Antibiotics Removal

Metal organic framework (MOF)-based micro/nanoscaled materials for heavy metal ions removal: The cutting-edge study on designs, synthesis, and applications

Carboxymethyl cellulose and metal-organic frameworks immobilized into polyacrylamide hydrogel for ultrahigh efficient and selective adsorption U(VI) from seawater