Abstract:Iron- and steelmaking cause ∼7% of the global CO2 emissions, due to the use of carbon for the reduction of iron ores. Replacing carbon by hydrogen as the reductant offers a pathway to massively reduce these emissions. However, the production of hydrogen using renewable energy will remain as one of the bottlenecks at least during the next two decades, because making the gigantic annual crude steel production of 1.8 billion tons sustainable requires a minimum stoichiometric amount of ∼97 million tons of green hydrogen per year. Another fundamental aspect to render the ironmaking sector more sustainable lies in an optimal utilization of green hydrogen and energy, thus reducing efforts for costly in-process hydrogen recycling. We therefore demonstrate here how the efficiency in hydrogen and energy consumption during iron ore reduction can be dramatically improved by the knowledge-based combination of two technologies: partially reducing the ore at low temperature via solid-state direct reduction (DR) to a kinetically defined degree, and subsequently melting and completely transforming it to iron under a reducing plasma (i.e. via hydrogen plasma reduction, HPR). Results suggest that an optimal transition point between these two technologies occurs where their efficiency in hydrogen utilization is equal. We found that the reduction of hematite through magnetite into wüstite via DR is clean and efficient, but it gets sluggish and inefficient when iron forms at the outermost layers of the iron ore pellets. Conversely, HPR starts violent and unstable with arc delocalization, but proceeds smoothly and efficiently when processing semi-reduced oxides, an effect which might be related to the material's high electrical conductivity. We performed hybrid reduction experiments by partially reducing hematite pellets via DR at 700 °C to 38% global reduction (using a standard thermogravimetry system) and subsequently transferring them to HPR, conducted with a lean gas mixture of Ar-10%H2 in an arc-melting furnace, to achieve full conversion into liquid iron. This hybrid approach allows to exploit the specific characteristics and kinetically favourable regimes of both technologies, while simultaneously showing the potential to keep the consumption of energy and hydrogen low and improve both, process stability and furnace longevity by limiting its overexposure to plasma radiation.

A Percolating Path to Green Iron

Hierarchical nature of hydrogen-based direct reduction of iron oxides

Hydrogen-based direct reduction of iron oxide at 700°C: Heterogeneity at pellet and microstructure scales

Influence of microstructure and atomic-scale chemistry on iron ore reduction with hydrogen at 700°C

Green steel at its crossroads: Hybrid hydrogen-based reduction of iron ores

Correlating Chemical Reaction and Mass Transport in Hydrogen-based Direct Reduction of Iron Oxide

Decarbonization of the Iron and Steel Industry with Direct Reduction of Iron Ore with Green Hydrogen

Reducing Iron Oxide with Ammonia: A Sustainable Path to Green Steel

Modelling a new, low CO2 emissions, hydrogen steelmaking process

The Direct Reduction of Iron Ore with Hydrogen

Hydrogen steelmaking. Part 1: Physical chemistry and process metallurgy

Chlor-Iron Process for the Low-Temperature, Direct Reduction of Iron Oxide for Green Steel

Multiscale modeling of non-catalytic gas-solid reactions applied to the hydrogen direct reduction of iron ore in moving-bed reactor

Green Ironmaking at Higher H2 Pressure: Reduction Kinetics and Microstructure Formation During Hydrogen-Based Direct Reduction of Hematite Pellets

How much hydrogen is in green steel?

A three-interface random pore model: the reduction of iron oxide in chemical looping and green steel technologies

Impact of hydrogen metallurgy on the current iron and steel industry: A comprehensive material-exergy-emission flow analysis

Electrochemistry in Action: Iron and Steel Manufacturing

Chemo-mechanical phase-field modeling of iron oxide reduction with hydrogen

Multiscale modeling of counter-current moving bed reactor for direct reduction of iron oxide: Unveiling influence of solid shape and pressure

Direct reduction of iron-ore with hydrogen in fluidized beds: A coarse-grained CFD-DEM-IBM study