Abstract:Active vibration control is the most effective method for stochastic multidimensional vibration in wind tunnel tests, in which vibration monitoring is the core foundation. Vibrations are induced by the disturbances of several complex air flow instabilities under extreme test conditions with high attack angles. Here, a decoupled unified observation method is proposed in order to fully monitor stochastic multidimensional vibration. First, stochastic multidimensional vibration is explained using the Cartesian coordinate system. Then, the multidimensional vibration decoupling of the pitch plane and the yaw plane is realized according to the proposed decoupling design principle of the long cantilever sting. A unified observation method is presented, based on inertial force theory, to observe multidimensional vibration due to acceleration in each decoupling plane. Verification experiments were conducted in lab and a transonic wind tunnel, using an established real-time monitoring system. The results of lab experiments indicate that, in the frequency region of 0–120 Hz, three vibration modes of a selected stochastic vibration can be decoupled and observed through the vibration components in pitch plane and yaw plane. In addition, wind tunnel tests were carried out according to the working conditions (α = −4~10° with γ = 45°) at Ma = 0.6 and Ma = 0.7, respectively. The results show that six vibration modes of two selected stochastic vibrations can be decoupled and observed through the vibration components in pitch plane and yaw plane. The experimental results prove that stochastic vibration can be fully monitored in multiple dimensions through the vibration components in pitch plane and yaw plane using the proposed decoupled unified observation method. Therefore, these results lay the foundation for active vibration control.

Piezoelectric Active Disturbance Rejection Control for Flow-Induced Vibration of the Wind Tunnel Test Models

Piezoelectric Adaptive Active Vibration Suppression for Wind-Tunnel Model Support Sting

Multidimensional Vibration Suppression Method With Piezoelectric Control For Wind Tunnel Models

Active Vibration Suppression of the Cantilever Sting for Wind Tunnel Models with Piezoelectric Control

Experimental Research on a Multi-modal Active Damping System for Transonic Wind-Tunnel Tests

An Active Damping Vibration Control System for Wind Tunnel Models

An active piezoelectric damping vibration control system for the sting used in wind tunnel

Vibration Control of Piezoelectric Integrated Thin-Walled Structures Using Disturbance Rejection Control with Double Integral Model

The Design and Experimental Study on Active Vibration Control System for Low Speed Wind Tunnel Test Model

Multi-Modal Vibration Control Method Combining Modal Decoupling and Active Disturbance Rejection for Wind Tunnel Models

Integrated Simulation and Design Method for Piezoelectric Active Vibration Control System of Fin Model

MIMO Multi-Frequency Active Vibration Control for Aircraft Panel Structure Using Piezoelectric Actuators

Disturbance Rejection Control With H-Infinity Optimized Observer For Vibration Suppression Of Piezoelectric Smart Structures

Active Vibration Control of Piezoelectric Bonded Smart Structures Using PID Algorithm

An Active Vibration Control Method Based on Energy-Fuzzy for Cantilever Structures Excited by Aerodynamic Loads

Vibration Suppression of Piezoelectric Integrated Flexible Manipulators Using H∞ Optimized Disturbance Rejection Control

A Decoupled Unified Observation Method of Stochastic Multidimensional Vibration for Wind Tunnel Models.

Design of Fin Buffeting Piezoelectric Active Alleviation System and Ground Model Testing

Generalized-Disturbance Rejection Control for Vibration Suppression of Piezoelectric Laminated Flexible Structures

Application of Active Damping Control Using Piezoelectric Material in Modeling of A Wind Turbine Blade

Development of an Anti-Vibration Aircraft Model Support System with Magnetorheological Annular Squeeze Dampers for Wind Tunnel