Abstract:In this work, a new concept of annular combustor with 16 oblique-injecting swirling burners is innovatively proposed to induce a gyratory flow motion for better circumferential mixing and ignition performance. The cold flow fields were obtained by the PIV method, which clearly verified the existence of the gyratory flow motion. The light-round sequences were recorded by a high-speed camera and compared with that of the straight-injecting combustor in two ignition modes, thus the SFFL (Spark First, Fuel Later) and the FFSL (Fuel First, Spark Later) modes. The light-round time, flame propagating positions, flow acceleration coefficient and circumferential flame spreading speed were obtained and discussed. The effects of the thermal expansion, velocity convection and the gyratory flow motion to the light-round process were systematically studied. The results show that the two combustors feature different light-round sequences, indicating that the flow characteristics play an important role in determining the ignition process. In the SFFL mode, the flame only propagates in one direction, which is consistent with the direction of the gyratory flow motion. While in the FFSL mode, the light-up of the oblique-injecting combustor is faster than that of the traditional combustor, when the bulk velocity U b is above 5.0 m/s. The light-round sequences in the oblique-injecting combustor are obviously asymmetrical, while those in the straight-injecting one are nearly symmetrical. The difference of the circumferential flame spreading speed between two branches of the flame fronts is mainly depended on U b and little correlated with the equivalence ratio, when U b > 4.0 m/s.

Numerical and Experimental Study of the Combustion Performance of an Integrated Inclined Combustor

Experimental and Numerical Study of a Two-Stage Swirl Burner

Numerical Investigation of the Combustion and Thermoacoustic Characteristics in an Annular Combustor with Hydrogen

Numerical and Experimental Investigation of a Non-Premixed Double Swirl Combustor

Numerical Investigation on Flow Characteristics and Emissions under Varying Swirler Vane Angle in a Lean Premixed Combustor

Numerical investigation of inlet guiding ring effect on combustor flow field with multiple swirler structures

Experimental and Numerical Investigation of the Non-Reacting Flow in a High-Fidelity Heavy-Duty Gas Turbine DLN Combustor

Experimental and numerical study on a cavity-swirler-based combustion strategy for advanced gas turbine engine

Numerical Studies on Flame Inclination in Porous Media Combustors

Computational Study of the Effect of Dual Air Swirling Injection on Turbulent Combustion of Kerosene–Air at a High Pressure

Numerical Studies for Performance Improvement of A Variable Geometry Dual Mode Combustor by Optimizing Deflection Angle

Numerical Simulation and Flame Characteristics Analysis of Non-Premixed Swirling Combustion

Numerical Simulation of the Combustion Characteristics of a Low NOx Swirl Burner: Influence of the Primary Air Pipe

Experimental study on cold two-phase flow in swirl burner exit

Influence of complex inlet conditions on the flow field and flow characteristics in compact combustor for gas turbine

Numerical Investigation on Mixing Performance and Diffusion Combustion Characteristics of H-2 and Air in Planar Micro-Combustor

Numerical investigation on combustion flow characteristics of a micro gas turbine swirl combustor with different protruded bluff body structures

Experimental investigation of the ignition dynamics in an annular premixed combustor with oblique-injecting swirling burners

Numerical Simulation of the Combustion Characteristics in a Flue Gas Internal Recirculation Burner

Effect of the Adjustable Inner Secondary Air-Flaring Angle of Swirl Burner on Coal-Opposed Combustion

Numerical Investigation on Mechanism of Swirling Flow of the Prefilming Air-Blast Fuel Injector