Abstract:BackgroundThe electron beams produced by laser plasma acceleration have excellent quality for pulse lengths of the order of fs. Due to the existence of a strong laser field, there are difficulties in direct applications, and more applications need to transmit the electron beams to the application terminal. The energy spread leads to the generation of energy chirp of the electron beam in the transmission.PurposeThis study aims to explore the design of the beam optics to compress the pulse length and keep it on the fs scale.MethodsAn achromatic beamline consisting of bending magnets and quadrupole magnets was designed to compress the pulse length of electron beams. Critical parameters of an achromatic beamline were given by a derived formula. Transformation matrix was employed to investigate the differences of the pulse lengths in achromatic transmission and non-achromatic transmission. The pulse lengths of electron beams with different energies were scanned with different deflection angles (0.3 rad, 0.6 rad, 0.9 rad) and deflection radii (0.15 m, 0.25 m, 0.35 m) to study the influence of beamline parameters. Finally, the magnetic field gradients of the quadrupole lens were adjusted to realize the compression of electron beams with different energies in a beamline.ResultsComparing to non-achromatic transmission, the pulse lengths of electrons with the same energy and different initial divergence angles can be compressed effectively in the achromatic beamline. The larger the deflection angle or the deflection radius, the longer the pulse duration of the electron beam with higher energy (>25 MeV). By adjusting the magnetic field gradients of the quadrupole lens, the pulse lengths can be reduced from more than 100 fs to around 20 fs at higher energies.ConclusionsUsing a fixed-size achromatic beamline, combined with magnetic field strength adjustment, the pulse lengths of electron beams with different energies can be kept on the order of fs after transmission.

Investigation on Asynchronized Beams Electron Optics System

Optimum Design of Electron Gun for 0.22-Thz Traveling Wave Tubes

Design and Experimental Demonstration of a Circular Beam Electron Gun and a PPM System for D-Band TWTs

Generation and Stable Transmission of Miniature Electron Beams for 0.65-THz Traveling Wave Tubes

An Ultrahigh Compression Ratio Sheet Beam Electron-Optical System for 0.66-THz Traveling-Wave Tubes

Design and Analysis of Electron Beam of 0.67 THz Traveling Wave Tube

High Energy Electron Radiography System Design and Simulation Study of Beam Angle-Position Correlation and Aperture Effect on the Images

Design of a Compact Electron Radiography System with Electron Source from Laser Wakefield Accelerator

Towards a compact all optical terahertz-driven electron source at Tsinghua University

Bunch-by-bunch Beam Transverse Feedback Electronics Designed for SSRF

Electron Beam Transport System for 263-Ghz Sheet Beam TWT

Study of achromatic beamline design for laser-driven femtosecond electron beams

Design and Experiment of a Sheet Beam Gun for Extended Interaction Oscillator

Proposal of a Femtosecond Megahertz Repetition-Rate Electron Diffraction Instrument Based on the Chinese Academy of Engineering Physics Terahertz Free Electron Laser Beamline.

Double-mode and double-beam staggered double-vane traveling-wave tube with high-power and broadband at terahertz band

Studies of the beam-ion instability and its mitigation with feedback system

Design of electron optical system of millimeter electrostatically focused traveling wave tube

Advanced drive laser system for a high-brightness continuous-wave photocathode electron gun

Control of the Longitudinal Compression and Transverse Focus of Ultrafast Electron Beam for Detecting the Transient Evolution of Materials

Design, Fabrication, and Beam Commissioning of a 216.667 MHz Continuous-Wave Photocathode Very-High-frequency Electron Gun

A 2.45 Ghz Electron Cyclotron Resonance Proton Ion Source and A Dual-Lens Low Energy Beam Transport