Abstract:Many systems are usually subjected to the combined effects of degradation and random shocks at the same time. Their failures are the competitive result of soft failure caused by degradation and hard failure caused by shocks. For operating machinery, wear failure is the main failure mechanism, and the machine is also subject to shock during the wear process. This paper proposes a new generalized surface wear model in combination with dependent competing failure processes; this proposed model is different from the other wear model with independent wear increments. As a typical mechanical structure, worm gears and worms are subjected to the combined effect of two failure mechanisms: soft failure caused by performance degradation, and hard failure caused by shocks. Meanwhile, it is necessary to consider the competitiveness and correlation of these two failure mechanisms. The interdependent competitive failure model is used to describe the failure of operating machinery. In this study, the extended Archard model is used to calculate the wear depth of the tooth surface, and the wear model is established through the wear threshold. The relationship between tooth surface wear depth and duty cycle, sliding speed, and contact stress is analyzed. An iterative algorithm is used to derive a nonlinear time-varying wear degradation model considering contact stress and sliding velocity. Comparing the calculation results with the Monte Carlo simulation method, the model has high accuracy and describes the mechanism of soft and hard failures, and the mutual dependence of the two failure mechanisms has an important effect on reliability. Numerical examples are presented to illustrate the developed reliability models, along with sensitivity analysis.

Study on the remaining useful life prediction method of hydraulic slide valve based on degradation-competition failure sharing random effect identification

Probabilistic model to predict longitudinal fracture failure of buried pvc pipes

Remaining Useful Life Prediction for Non-Stationary Degradation Processes with Shocks

The Remaining Useful Life Prediction Method of a Hydraulic Pump under Unknown Degradation Model with Limited Data

Remaining useful life prediction for an adaptive skew-Wiener process model

Remaining Useful Life Prediction for Hybrid Stochastic Degradation Processes with Finite Time Delay

Reliability prediction of machinery with multiple degradation characteristics using double-Wiener process and Monte Carlo algorithm

Reliability assessment of competing failure processes with correlated multi-performance characteristics: A case study of subsea Christmas tree hydraulic power unit

Remaining Useful Life Prediction for Multiple Degradation Indicators Systems Considering Random Correlation

Service Life Predicting of Dam Systems with Correlated Failure Modes

Degradation Modeling and Remaining Useful Life Prediction for a Multi-component System with Stochastic Dependence

Remaining useful life prediction for multivariable stochastic degradation systems with non‐Markovian diffusion processes

Remaining Useful Life Prediction for Multi-Component Systems with Hidden Dependencies.

Degradation modeling and remaining life prediction of multi-state long-life systems under random environmental influences

Remaining useful life prediction for bivariate deteriorating systems under dynamic operational conditions

Remaining Useful Life Prediction of Rolling Element Bearings Based on Hybrid Drive of Data and Model

Failure mode division and remaining useful life prognostics of multi-indicator systems with multi-fault

A Reliable Prognosis Approach for Degradation Evaluation of Rolling Bearing Using MCLSTM

Prognosis-driven reliability analysis and replacement policy optimization for two-phase continuous degradation

Reliability Analysis for the Dependent Competing Failure With Wear Model and its Application to the Turbine and Worm System

Remaining useful life prediction for complex systems with multiple indicators of stochastic correlation considering random shocks