A Framework for Optimizing Continuous Methane Monitoring System Configuration for Minimal Blind Time: Application and Insights from over 100 Operational Oil & Gas Facilities

Ali Lashgari,Noah Metzger,Umair Ismail,David Ball,Nathan Eichenlaub

DOI: https://doi.org/10.26434/chemrxiv-2024-q844g

2024-10-07

Abstract:Continuous monitoring systems (CMS) that utilize fixed-point sensors provide high temporal resolution point-in-space measurements of ambient methane concentration. This study introduces a modular framework for optimizing CMS configurations, encompassing sensor density (number of sensors) and near-optimal placement. By introducing a metric called ‘blind time’, this study attempts to capture periods where the network fails to make detections that could satisfy the regulatory requirement of quantifying emissions every 12 hours. This framework is then applied to 124 operational oil and gas production facilities with a wide variety of site characteristics and meteorological conditions. This study determines a representative blind time for near-optimum CMS configurations for operational facilities and then investigates the impact of different sensor network densities on the performance of the CMS. The results demonstrate that 3-sensor networks, when placed in near-optimum arrangements, can achieve blind time of less than 10% and a mean time to detection of approximately 82 minutes.

Chemistry

What problem does this paper attempt to address?

The paper aims to address the optimization of Continuous Monitoring Systems (CMS) for methane in oil and gas production facilities, particularly focusing on sensor density and optimal placement. Specifically:

1. **Introduction of the Blind Time Concept**: The paper introduces a new metric called "blind time" to measure the proportion of time during which effective methane emission data cannot be generated every 12 hours due to insufficient direct pollution transmission. This concept is designed to meet the requirements of the U.S. Environmental Protection Agency (EPA), which mandates that CMS must accurately quantify methane emissions at least once every 12 hours.

2. **Framework Application and Evaluation**: The study proposes a modular framework that combines forward dispersion modeling and a greedy optimization algorithm to determine the optimal CMS configuration (including sensor network density and approximate optimal placement). By applying this framework to 124 real oil and gas production facilities with varying site characteristics and meteorological conditions, the study identifies representative blind times and explores the impact of different sensor network densities on CMS performance.

3. **Optimization Objectives**: The goal of the research is to evaluate whether the proposed framework and its configured CMS can consistently detect specific emission levels using real data. Additionally, the study designs a benchmark test to compare the performance of the open-source tool Chama with the proposed framework on smaller datasets.

Overall, the paper aims to enhance the continuous monitoring capability of methane emissions by optimizing CMS configurations to meet regulatory requirements and improve detection efficiency.