Abstract:The iterative closest point (ICP) algorithm is one of the most widely used methods for point sets' registration. However, ICP is very sensitive to the selection of initial points and is easy to fall into local optimum. To address this problem, many techniques have been developed. In this study, a two-step registration method is proposed for two 3-D point sets' registration, which is achieved by a combination of rough and fine registrations. Specifically, a multidiscriminant parameter feature (MDPF) extraction approach is developed and embedded into the rough registration stage in order to find new corresponding point pairs for the fine registration. Three geometric features are chosen after experimental investigation for key points selection. By using the threshold discriminant condition to determine the key points and the distance constraint to eliminate the wrong point pairs, the feature points can be extracted, and the final transform parameters can be derived based on these feature points. In order to improve the computational efficiency for fine registration, the center of gravity is created to find the closest point in solving the transformation matrix, which is especially beneficial for registering complex surfaces. Experimental results show that the proposed method outperforms the traditional ICP approach and some typical existing improved algorithms in terms of the root-mean-square error (RMSE), the total number of feature points, and the execution time. In particular, the performance is improved 40% in terms of the RMSE and 50% in terms of the execution time in comparison with ICP on some benchmark data sets. Experiments also demonstrate that reliable reconstruction results can be obtained for both real outdoor and indoor environments.

A Point Cloud Registration Algorithm Considering Multi-Allowance Constraints for Robotic Milling of Complex Parts

Optimizing Machining Allowance for Thin-Walled Aerospace Parts with Multi-Milling Features

An Improved Supervoxel Clustering Algorithm of 3D Point Clouds for the Localization of Industrial Robots

An automated approach for machining allowance evaluation of casting parts

Feature-based optimization analysis technology of precision casting machining allowance

Multi-resolution-based mesh registration

Automatic evaluation of machining allowance of precision castings based on plane features from 3D point cloud

ACCURATE REGISTRATION ALGORITHM FOR POINT CLOUD BASED ON PROPERTIES

Real-time pose correction and registration of complex workpiece in robotic machining considering normal consistency constrains

Trajectory Planning and Optimization for Robotic Machining Based On Measured Point Cloud

A novel robust point cloud registration method based on directional feature weighted constraint

A Robust Probability-based Joint Registration Method of Multiple Point Clouds Considering Local Consistency

An Automatic Registration Approach to Laser Point Sets Based on Multidiscriminant Parameter Extraction

PR-Alignment: Multidimensional Adaptive Registration Algorithm Based on Practical Application Scenarios

Local Scanned Point-Cloud Registration of Aeroengine Pipeline System Based on Axial Constraints

High-precision point cloud registration system of multi-view industrial self-similar workpiece based on super-point space guidance

Minimax Registration for Point Cloud Alignment

Robust Point Cloud Registration in Robotic Inspection with Locally Consistent Gaussian Mixture Model

Research on Optimization Method of Discrete Point Cloud Registration Based on Improved Particle Swarm Optimization

Multi-View Point Cloud Registration Based on Improved NDT Algorithm and ODM Optimization Method