Abstract:Stretchable strain sensors with well-controlled sensitivity and stretchability are crucial for applications ranging from large deformation monitoring to subtle vibration detection. Here, based on single-metal material on the elastomer and one-pot evaporation fabrication method, we realize controlled strain sensor performance via a novel programable cracking technology. Specifically, through elastomeric substrate surface chemistry modification, the microcrack generation and morphology evolution of the strain sensing layer is controlled. This process allows for fine tunability of the cracked film morphology, resulting in strain sensing devices with a sensitivity gauge factor of over 10 000 and stretchability up to 100%. Devices with a frequency response up to 5.2 Hz and stability higher than 1000 cycles are reported. The reported strain sensors, tracking both subtle and drastic mechanical deformations, are demonstrated in healthcare devices, human–machine interaction, and smart-home applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c10975.Summary of Figure of merit for our sensor and other crack-based sensors (Table S1); Water contact angle measurement (Figure S1); Additional SEM images and UV–vis spectra of Au films on PDMS (Figure S2); Additional microscope images of Au films on PDMS (Figure S3); Crack densities for Au films on PDMS (Figure S4); Mechanism illustrations for Au cracked-domain and cut-through cracks (Figure S5); Crack morphology evolution of the Au film on F-PDMS (Figure S6); Crack morphology evolution of the Au film on P-PDMS with 85° (θc) (Figure S7); Initial resistance of Au films respect to water contact angles of PDMS (Figure S8); Statistical information for the sensors' performances (Figure S9); Maximum stretchability and maximum sensitivity for sensors (Figure S10); Performance of the sensor constructed by the Au film on plasma-treated PDMS for 15 s (Figure S11); Performance of the cracked-domain sensor during a cyclic test for 5000 cycles under an applied strain of 50% (Figure S12); Performance of the cut-through crack sensor during a cyclic test for 3000 cycles under an applied strain of 1% (Figure S13); and Schematics for the measurement setup (Figure S14) (PDF)This article has not yet been cited by other publications.

High-Sensitivity Flexible Strain Sensor with the Inverted Pyramid Microstructure Array Based on Stress-Induced Regular Linear Cracks

Ultrasensitive and ultrastretchable metal crack strain sensor based on helical polydimethylsiloxane

Highly Sensitive and Fast Response Strain Sensor Based on Evanescently Coupled Micro/nanofibers

High Sensitivity, Wide Linear‐Range Strain Sensor Based on MXene/AgNW Composite Film with Hierarchical Microcrack

Highly Sensitive Strain Sensor with Ultra-low Detection of Limit Based on Pre-Defined Serpentine Cracks

Tuning Strain Sensor Performance via Programmed Thin-Film Crack Evolution

Stretchable, ultrasensitive strain sensor with high-linearity by constructing crack-based dual conductive network

Wrinkled and cracked amorphous carbon film for high-performance flexible strain sensors

High-Tactile Sensitivity of Piezoresistive Sensors with a Micro-Crack Structure Induced by Thin Film Tension

A double-crack structure for bionic wearable strain sensors with ultra-high sensitivity and a wide sensing range

Nanoengineered highly sensitive and stable soft strain sensor built from cracked carbon nanotube network/composite bilayers

Crack engineering boosts the performance of flexible sensors

Pressure sensors with ultrahigh sensitivity inspired by spider slit sensilla

Crack-Based Core-Sheath Fiber Strain Sensors with an Ultralow Detection Limit and an Ultrawide Working Range

Hollow-porous fiber-shaped strain sensor with multiple wrinkle-crack microstructure for strain visualization and wind monitoring

An Ultrasensitive, Durable and Stretchable Strain Sensor with Crack-wrinkle Structure for Human Motion Monitoring

A Mathematical Model for Predicting the Electro-Mechanical Behavior of Biomimetic Crack Sensors: Effect of Crack Depth and Gap

Flexible Sensors with Robust Wear-Resistant and Sensing Ability: Insight on the Microcrack Structure, Multiple Interfacial Bonds, and Possible Sensing Mechanisms

Engineering microcracks in MWCNT/elastomer bilayers for high-performance stretchable sensor development

Carbon nanotubes/acetylene black/Ecoflex with corrugated microcracks for enhanced sensitivity for stretchable strain sensors

From network to channel: crack-based strain sensors with high sensitivity, stretchability, and linearity via strain engineering