Exploring Straw Movement Through the Simulation of Shovel-Type Seedbed Preparation Machine-Straw-soil Interaction Using the DEM-MBD Coupling Method

Jianxin Lin,Qingxi Liao,Xufeng Wang,Yan Kang,Wenbin Du,Qingsong Zhang

DOI: https://doi.org/10.1016/j.compag.2024.109465

2024-01-01

Abstract:Straw incorporation into soil can effectively address the issue of the significant rice straw residue after rice harvest during seedbed preparation for the direct planting of rapeseed in the rice-rapeseed rotation areas of the mid-lower Yangtze River. Investigating the uniformity of straw distribution in soil after tillage and the movement of straw during the operation of tillage machines can help improve the structure of tillage implements, thereby enhancing tillage quality and ultimately increasing crop yield. Based on the soil and straw characteristics measured in rice stubble fields, a simulation model of the interaction between a full-scale shovel-type seedbed preparation machine, straw, and soil was established using the discrete element method-multibody dynamics coupling method. The soil bonding parameters were calibrated using soil cone index data measured in field and penetration simulation experiments using a cone penetrometer. Field experiments with the shovel-type seedbed preparation machine in rice stubble fields verified the performance of the machine operation and the accuracy of the simulation model. The validated model was used to monitor the movement of selected straw samples during the simulation. The results of field experiments showed that after the operation of the shovel-type seedbed preparation machine, 76.02 % of the straw mass was concentrated in the 0-80 mm depth layer, while 17.91 % and 6.07 % were in the 80-160 mm and 160-240 mm depth layers, respectively. The coefficient of variation (COV) of straw distribution across these layers was 91.71 %. The simulation results showed a straw distribution trend that was largely consistent with field experiment results, with a COV error of 17.66 % compared to the measured values. During the simulation process, all the straws initially moved backward in the direction of machine advancement. Straw buried in the 0-80 mm depth layer then moved significantly forward, while straw buried in the 160-240 mm depth layer hardly moved. In the vertical direction, the average upward movement of straw buried in the 0-80 mm depth layer was 242.6 mm. Most of the straw buried at depths of 80-160 mm and 160-240 mm moved downward and stabilized after slight vertical oscillations. Based on the structure of the shovel-type seedbed preparation machine, it can be understood that the straw thrown up mainly falls into the 0-80 mm depth layer after colliding with the retaining plate and soil harrow. Straw distributed in the 80-160 mm and 160-240 mm depth layers primarily originated from the straw pressed into the soil by the shovel blade. By improving the structure of the shovel blade and shovel body, the probability of straw being buried in the 80-160 mm and 160-240 mm depth layers can be increased, thereby improving the uniformity of straw distribution in the soil after the operation of the shovel-type seedbed preparation machine. This study provides a reference for optimizing the structure of straw-returning machines and improving the uniformity of straw distribution in the soil.