Green Micro-Led with a Bandwidth Exceeding 2 GHz for 9-Gbps Visible Light Communication Based on SNR Gap-Dependent Bit and Power Loading

Zuxin Jin,Runze Lin,Xuyang Liu,Di Sun,Bin Liu,Tao,Feifan Xu,Zhilai Fang,Xugao Cui,Pengfei Tian

DOI: https://doi.org/10.1109/jlt.2024.3470242

IF: 4.7

2024-01-01

Journal of Lightwave Technology

Abstract:Visible light communication (VLC) possesses abundant spectrum resource and can be a promising candidate in the 6G network for its ability of combining positioning, lighting and communication. At present, the high-speed VLC is mainly based on blue and red light. The data rate of green light is still low. In order to develop the bandwidth and data rate of green micro-LEDs in wavelength division multiplexing (WDM) applications of VLC system, we designed high- bandwidth green micro-LEDs with high light output power. A 10- $\mu$ m green micro-LED achieved an E-E bandwidth and an E-O bandwidth up to 1.27GHz and 2.19GHz at a current density of 40 kA/cm $^{2}$ . In order to increase the light output power to milliwatts, whereas mostly maintaining the same bandwidth as single pixel, series-connected micro-LED array was fabricated. We also utilized a bit and power loading algorithm for VLC system, which can obtain high spectral efficiency below the $3.8\times 10^{-3}$ forward error correction (FEC) threshold by adopting signal-to-noise ratio (SNR) gap adjustment. Record data rates of 9.06Gbps, 8.14Gbps and 6.23Gbps with bit error rates (BER) of $3.7\times 10^{-3}$ , $3.4\times 10^{-3}$ and $3.2\times 10^{-3}$ were achieved at 0.2m, 1m and 3m, respectively. These are the highest data rates achieved by green micro-LED in free space, which will promote the applications of high-speed WDM in VLC.