Flow-electrode capacitive deionization (FCDI) with microfiltration membranes for water reclamation from highly saline and dye-polluted wastewater
Mojtaba Mohseni,Christian J. Linnartz,Sonia Echtermeyer,Lucas Stüwe,Matthias Wessling
DOI: https://doi.org/10.1016/j.jwpe.2024.104954
IF: 7
2024-03-01
Journal of Water Process Engineering
Abstract:Textile wastewater, in addition to being highly polluted by organics like dyes, contains large amounts of salts, e.g., ≈ 10 g L − 1 , that need to be removed before discharged to the environment or reused. This work introduces a new FCDI process that uses microfiltration membranes to desalinate and decolor synthetic textile wastewater. Synthetic wastewater simulates the characteristics of real Indian textile wastewater, containing a mixture of different salts (NaCl, Na 2 SO 4 , NaHCO 3 ), with a total concentration of 6.9 g L − 1 , and tartrazine (MW = 534.3 g mol − 1 ) as the large organic pollutant model, with a concentration of 2.1 g L − 1 . FCDI modules with different membrane configurations, including microfiltration membranes (MF), are investigated, giving insights into the desalination and dye removal efficiencies under steady-state operation. At wastewater flow rates below 0.08 mL min − 1 , the conductivity of treated water reaches 0.2 mS cm − 1 , with a tartrazine concentration below 50 mg L − 1 , fulfilling the requirement for water reuse in textile industries. This work reveals the potential of the FCDI process for both desalination and organics removal that can be applied to a wide range of wastewater streams.
engineering, chemical, environmental,water resources