Novel post-heat treatment green biodegradable PLA@SiO 2 nanocomposite membrane for water desalination
Mostafa M. Sayed,Hamouda M. Mousa,Ahmed H. El-Shazly,Abdelrahman Zkria,Tsuyoshi Yoshitake,Marwa ElKady
DOI: https://doi.org/10.1016/j.jece.2024.114378
IF: 7.7
2024-10-14
Journal of Environmental Chemical Engineering
Abstract:Membrane distillation (MD) has received significant attention because of its energy efficiency and ability to treat industrial wastewater and salty water. However, the synthetic nature of commonly used membranes raises environmental disposal concerns, requiring the development of alternative eco-membranes. To address this issue, a novel, eco-friendly membrane using polylactic acid (PLA) coated with green silica nanoparticles (SiO 2 NPs), modified by post-heat treatment, was developed for effective direct contact membrane distillation (DCMD). Herein, two nanofibrous membranes were fabricated via electrospinning/electrospraying: one, PLA, with a 12.5 wt% PLA solution, and another, PLA@SiO 2 , with 2 % (w/v) SiO 2 NPs coating. The PLA@SiO 2 membrane demonstrated enhanced hydrophobicity. Various post-heat treatments were applied to optimize membrane properties, such as structure, pore size, hydrophobicity, liquid entry pressure (LEP), thickness, and thermal stability. In addition, the desalination performance of all membranes was evaluated using a DCMD unit for 6 h. Results showed that the heat-pressed then annealed PLA@SiO 2 membrane (denoted M44) exhibited notable improvements, including an LEP of 128.7 kPa, a tunable pore size of 0.21 μm, and a contact angle of 135.9°. Furthermore, the M44 membrane demonstrated a porosity of 80.5 %, a stable permeate flux of 14.3 kg.m −2 .h −1 , and an exceptional salt rejection of 99.99 % over a 24 h DCMD test. This novel eco-membrane shows promising potential for efficient desalination and represents a significant advancement in sustainable MD applications.
engineering, chemical, environmental