Abstract:Next generation lithium-ion batteries (LIB) with high energy density and high power density have recently become of great interest for electric vehicle and portable devices. With the further upgrade of especially electric vehicles, the next generation LIB with high power and high energy density is urgently required. For this purpose, composite electrode consisting of commercially available graphite active material mixed with silicon nanoparticles is under current development. The main objectives are a significant increase of the practical capacity and energy density of commercial anodes, an overcome of the drawbacks of pure silicon due to large volume changes during electrochemical cycling, and the development of a technology suitable for mass production. In order to reduce the intrinsic mechanical stress of silicon/graphite electrodes and to improve the lithium-ion transport kinetic, free-standing electrode structures were generated by applying ultrafast industrial capable laser material processing. This advanced laser technology is demonstrated to be a flexible and powerful tool for pushing silicon/graphite (Si/C) composite anode materials beyond state of the art electrodes towards application. The electrochemical properties of cells with unstructured and structured electrodes were systematically analyzed by means of cyclic voltammetry, galvanostatic measurements, and electrochemical impedance spectroscopy. The increased active surface enables a significant improvement of lithium-ion diffusion kinetics. Furthermore, it is expected that the increased active surface will also provide additional artificial porosity for active material expansion, which in turn will reduce the mechanical stress within the electrodes during lithiation or delithiation. In this context, in-situ scanning electron microscopy (SEM) was performed in order to analyze the active material volume changes during charging and discharging. A main engineering challenge was to optimize the electrode architecture such as the pitch distance of free-standing structures regarding an enhanced electrochemical performance and a reduced material loss. Furthermore, an alumina (Al2O3) layer with a thickness of 5 nm, which acts as an artificial SEI, was coated on structured silicon/graphite electrodes by applying Atomic Layer Deposition (ALD). Cyclic voltammetry measurements were subsequently performed in order to investigate the fundamental properties of cells with structured and Al2O3- coated silicon/graphite electrodes. Galvanostatic measurements reveal that the cells with structured electrodes exhibit excellent electrochemical properties, i.e., a significantly improved capacity retention. ALD layers can contribute to further improvement of cycle stability and cell lifetime. In addition, advanced full cells with Lithium Nickel Manganese Cobalt Oxide NMC622 as cathode and Si/C as counter electrode were assembled and the electrochemical data will be presented.

An Integrated Simulation and Experimental Study of Calendering Process in Water-Based Manufacturing of Lithium-Ion Battery Graphite Electrode

Influence of calendering process on the structural mechanics and heat transfer characteristics of lithium-ion battery electrodes via DEM simulations

Investigating Electrode Calendering and its Impact on Electrochemical Performance by Means of a New Discrete Element Method Model: Towards a Digital Twin of Li-Ion Battery Manufacturing

Pore-scale modeling and investigation on the effect of calendering on lithium-ion battery cathodes

Discrete modeling of the calendering process for positive electrodes of Li-ion batteries

Insights into Influencing Electrode Calendering on the Battery Performance

Modeling of the Calendering Process for Lithium-Ion Batteries with DEM Simulation

Modeling the effect of calendering pressure on the microstructure and properties of Li-ion battery electrodes

Effect of Calendering on Electrode Wettability in Lithium-Ion Batteries

2D Discrete Element Simulation of Electrode Structural Evolutions in Li‐Ion Battery During Drying and Calendering

Optimization of electrode manufacturing processes from the perspective of mechanical properties

Simulation of the Calendering Process of NMC‐622 Cathodes for Lithium‐Ion Batteries

An Experimentally-Validated 3D Electrochemical Model Revealing Electrode Manufacturing Parameters Effects on Battery Performance

DEM Simulations of the Calendering Process: Parameterization of the Electrode Material of Lithium-Ion Batteries

(Invited) Manufacturing and Characterization of Advanced High Energy Silicon/Graphite Electrodes

Classification of Calendering‐Induced Electrode Defects and Their Influence on Subsequent Processes of Lithium‐Ion Battery Production

Optimizing lithium-ion battery electrode manufacturing: Advances and prospects in process simulation

Microstructure evolution and mechanical analysis of lithium battery electrode in calendering deformation zone

Slurry solvent content influence on electrode preparation, microstructure and performance

Lithium Ion Battery Electrode Calendering Study By Combining X-Ray Computed Tomography and 3D-Resolved Physical Process Models

Investigating the Structure and Performance of Electrodes Made by Dry and Wet Slurry Processes