Abstract:This article presents an 18~30 GHz vector-sum phase shifter for wireless application in the millimeter-wave regime. It is composed of an I/Q signal generator, two variable-gain amplifiers (VGA), and a digital-to-analog converter with a quadrant selector. To attain wideband quadrature signal, a two-stage hybrid based on transformers is proposed to realize the I/Q signal generator. The first- and second-stage hybrids are designed with different resonating frequencies. As a result, the amplitude and phase errors of the I/Q signal generator are significantly decreased in a wide frequency band. In addition, theoretical analysis based on a simplified equivalent-circuit model is performed to guide the circuit implementation, and its correctness is demonstrated by electromagnetic simulation. To mitigate the impact of the VGAs’ parasitics on the phase performance, a capacitive-neutralization technique is applied to cancel parasitics of transistors in the VGAs. A prototype circuit is designed using a 130-nm SiGe BiCMOS process. The measured results show that the circuit achieves a root-mean-square (RMS) amplitude error of less than 1.4 dB and an RMS phase error of 1.4°~3.4° across 18~32 GHz. The tested peak gains of all the phase states are −1~4.5 dB with an input balun ( $\approx 1.9$ dB loss) and an output balun ( $\approx 2$ dB loss) at 22 GHz. Also, the input 1-dB compression point and noise figure are tested, which are $\geq $ -1 dBm and $\leq 15.5$ dB in the targeting frequency band.

Insertion Loss Calibration for A Phase Shifter Network

Over-The-Air Calibration of A Phase Shifter Network.

Over-The-Air Calibration of Phase Shifter Network for Hybrid MIMO Systems.

A Calibration Scheme for 24–28-Ghz Variable-Gain Phase Shifter in 65-Nm CMOS

Calibration of Phase Shifter Network for Hybrid Beamforming in Mmwave Massive MIMO Systems.

Online Calibration of Phase Shifter Network for Mmwave Massive MIMO Systems in Multipath Channels

A Simple Over-The-Air Hardware Calibration Procedure In Tdd Systems

A Frequency-Domain I/Q Imbalance Calibration Algorithm for Wideband Direct Conversion Receivers Using Low-Cost Compensator.

An 18~30 GHz Vector-Sum Phase Shifter with Two-Stage Transformer-Based Hybrid in 130-Nm SiGe BiCMOS

Joint Real-Time Phase Shifter Network Calibration and Beam Tracking for mmWave Communication

A Sensing-Based Over-the-Air Phased Array Antennas Phase Calibration Method With Greedy Algorithm

Over-the-Air Phase Calibration of Reconfigurable Intelligent Surfaces

Phase Calibration for Intelligent Reflecting Surfaces Assisted Millimeter Wave Communications

Tx-Rx Reciprocity Calibration for Hybrid Massive MIMO Systems

Performance Analysis of Discrete-Phase-Shifter IRS-aided Amplify-and-Forward Relay Network

An Efficient Calibration Algorithm for IRS-Aided Mmwave Systems with Hardware Impairments.

Over-the-Air Antenna Array Calibration for mmWave Hybrid Beamforming Systems Based on Monte Carlo Markov Chain Method

Location and Map-Assisted Wideband Phase and Time Calibration Between Distributed Antennas

A 28 GHz 8-Bit Calibration-Free LO-Path Phase Shifter Using Transformer-Based Vector Summing Topology in 40 Nm CMOS

A 22.5–33.5-Ghz Hybrid Phase Shifter with Low Phase and Amplitude Error for 5G and Satellite Communication

Phases Calibration of RIS Using Backpropagation Algorithm