Abstract:The development of high-performance supercapacitor electrode materials is imperative to alleviate the ongoing energy crisis. Numerous transition metals (oxides) have been studied as electrode materials for supercapacitors owing to their low cost, environmental-friendliness, and excellent electrochemical performance. Among the developed binary transition metal oxides, manganese cobalt oxides typically show high theoretical capacitance and stable electrochemical performance, and are widely used in the electrode materials of supercapacitors. However, the poor conductivity and active material utilization of manganese cobalt oxide-based electrode materials limit their potential capacitance application. Cotton is mainly composed of organic carbon-containing materials, which can be transformed to carbon fibers after calcination. The resultant carbonaceous material exhibits a large specific surface area and good conductivity. Such advantages could potentially suppress the negative effects caused by the poor conductivity and small specific surface area of manganese cobalt oxides, thereby improving the electrochemical performance. Herein, we firstly deposited manganese cobalt oxides on cotton by a simple hydrothermal method, yielding a composite of manganese cobalt oxides and carbon fibers via subsequent calcination, to improve the electrochemical performance of the electrode material. X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), Xray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET), thermogravimetric analysis (TGA), and electrochemical characterizations were used to investigate the physical, chemical, and electrochemical properties of the prepared samples. The fabricated manganese cobalt oxides in the composite were uniformly dispersed on the carbon fiber surface, which increased the contact between the interface of the electrode material and electrolyte, and enhanced electrode material utilization. The electrode material was confirmed to have well contacted with the electrolyte during a contact angle test. Hence, a pseudo-capacitance reaction completely occurred on the manganese cobalt oxide material. Moreover, the addition of carbon fibers reduced the resistance of the material, resulting in excellent capacitive performance. The capacitance of the prepared composite was 854 F.g(-1) at a current density of 2 Ag-1. The capacitance was maintained at 72.3% after 2000 cycles at a current density of 2 Ag-1. These results indicate that the manganese cobalt oxide and carbon fiber composite is a promising electrode material for high-performance supercapacitors. The findings presented herein provide a strategy for coupling with carbon materials to enhance the performance of supercapacitor electrode materials based on manganese cobalt oxides. Thus, novel insights into the design of high-performance supercapacitors for energy management are provided.

Synthesis of Rice Husk-Based Porous Carbon/transition Metal (ni, Co, Mn) Composites and Their Supercapacitor Performance

Formation of Bimetallic Metal-Organic Framework Nanosheets and Their Derived Porous Nickel-Cobalt Sulfides for Supercapacitors.

Co2SiO4/CoO Heterostructure Anchored on Graphitized Carbon Derived from Rice Husks with Hierarchical Pore As Electrode Material for Supercapacitor

Development Of Mno2/Porous Carbon Microspheres With A Partially Graphitic Structure For High Performance Supercapacitor Electrodes

Synthesis of Fe/N Co-doped Porous Carbon Spheres Derived from Corncob for Supercapacitors with High Performances

MnCo Oxides Supported on Carbon Fibers for High-Performance Supercapacitors

Nickel foam supported biochar doped Ni-Mo bimetallic oxide for supercapacitor applications

Highly Porous Nanocomposites of Mn Doped Cobalt-Based Hydroxide/sulfide As High-Performance Electrode Materials for Hybrid Supercapacitors

MnO2/Carbon Composites for Supercapacitor: Synthesis and Electrochemical Performance

Cu-doped NiCo 2 S 4 /Kochia biomass porous carbon electrode material with high performance for hybrid supercapacitors

Facile Synthesis of Manganese Cobalt Oxide/Nickel Cobalt Oxide Composites for High-Performance Supercapacitors

Nitrogen Doping of Porous Carbon Electrodes Derived from Pine Nut Shell for High-Performance Supercapacitors

Bamboo fiber-derived porous carbon microspheres decorated with MnO 2 for enhanced supercapacitor performance

Tailoring activation of CoNiO nanoparticles/porous carbon nanofibers by atomic doping for high performance supercapacitors

Influence of metal ion on structure and capacitance performances of manganese oxide/carbon materials for supercapacitors

Formation of CoO-NiO Nanoparticles on Nitrogen Doped Porous Carbon as High Performance Supercapacitor Electrode

Ethanol-assisted Solvothermal Synthesis of Porous Nanostructured Cobalt Oxides (coo/co3o4) for High-Performance Supercapacitors

N-, P-, and Ni-Co-doped Porous Carbon from Poplar Powder and Graphene Oxide Composites as Electrode Materials for Supercapacitors

Effects of Metal-Coupled Exogenous Nitrogen on the Performance of Supercapacitors Based on Biomass Carbon Materials

Synthesis and performances of a ZnCo2O4@MnMoO4 composite for a hybrid supercapacitor

Cobalt Oxide Nanoparticles Embedded in N-Doped Porous Carbon as Efficient Electrode for Supercapacitor