Abstract:Prediction and manipulation of the evaporation of small droplets is a fundamental problem with importance in a variety of microfluidic, microfabrication, and biomedical applications. A vapor-diffusion-based model has been widely employed to predict the interfacial evaporation rate; however, its scope of applicability is limited due to incorporation of a number of simplifying assumptions of the physical behavior. Two key transport mechanisms besides vapor diffusion-evaporative cooling and natural convection in the surrounding gas-are investigated here as a function of the substrate wettability using an augmented droplet evaporation model. Three regimes are distinguished by the instantaneous contact angle (CA). In Regime I (CA ≲ 60°), the flat droplet shape results in a small thermal resistance between the liquid-vapor interface and substrate, which mitigates the effect of evaporative cooling; upward gas-phase natural convection enhances evaporation. In Regime II (60 ≲ CA ≲ 90°), evaporative cooling at the interface suppresses evaporation with increasing contact angle and counterbalances the gas-phase convection enhancement. Because effects of the evaporative cooling and gas-phase convection mechanisms largely neutralize each other, the vapor-diffusion-based model can predict the overall evaporation rates in this regime. In Regime III (CA ≳ 90°), evaporative cooling suppresses the evaporation rate significantly and reverses entirely the direction of natural convection induced by vapor concentration gradients in the gas phase. Delineation of these counteracting mechanisms reconciles previous debate (founded on single-surface experiments or models that consider only a subset of the governing transport mechanisms) regarding the applicability of the classic vapor-diffusion model. The vapor diffusion-based model cannot predict the local evaporation flux along the interface for high contact angle (CA ≥ 90°) when evaporative cooling is strong and the temperature gradient along the interface determines the peak local evaporation flux.

Integrating Nanoscale Dynamics for Enhanced Evaporation: A Theoretical Framework Addressing Nonlocal Transport in Nanopores

Numerical analysis of evaporation from nanopores using the direct simulation Monte Carlo method

New Model for Liquid Evaporation and Vapor Transport in Nanopores Covering the Entire Knudsen Regime and Arbitrary Pore Length

Theoretical and numerical study of nanoporous evaporation with receded liquid surface: effect of Knudsen number

Evaporation-driven Liquid Flow Through Nanochannels

Ultrafast Diameter-Dependent Water Evaporation from Nanopores

Molecular kinetic modelling of non-equilibrium evaporative flows

Evaporation Kinetics of Nano Water Droplets using Coarse-Grained Molecular Dynamic Simulations

The Interaction Between Droplet Evaporation and Turbulence with Interface-Resolved Direct Numerical Simulation

Wetting fluid behaviour with phase transition in geological nanopores: Liquid film, capillary condensation and evaporative flow

Interfacial Effects of Nanostructured Doubly Reentrant Surfaces on the Evolution of Local Concentration and Fluid Flow in an Evaporating Droplet

Fast Water Evaporation from Nanopores

Evaporation from arbitrary nanoporous membrane configurations: An effective evaporation coefficient approach

Molecular Dynamics Simulations of Evaporation-Induced Nanoparticle Assembly

Molecular Dynamics Study On Interface Properties And Interphase Transport

Edge-enhanced Ultrafast Water Evaporation from Graphene Nanopores

Suspended water nanodroplets evaporation and its deviation from continuum estimations

Influence of surface wettability on transport mechanisms governing water droplet evaporation

Non-equilibrium molecular dynamics simulation of water flow inside nano-slit

Drying in nanoporous media with Kelvin effect: Capillary imbibition against evaporation by smoothed particle hydrodynamics method

Molecular dynamics simulations of the evaporation of particle-laden droplets