Abstract:Efficient thermal management has become a bottleneck for the further development of highly integrated and high-power optoelectronic devices. Vapor chambers (VCs) based on the passive liquid-vapor phase-change process have attracted increasing attention due to their extraordinary thermal management capabilities together with easy-to-assemble advantages. Nowadays, as optoelectronic devices continuously get more compact and miniaturized, there exists a great demand to develop high-performance ultra-thin VCs with overall thicknesses below 0.3 mm. However, the demand has been seldom reached by present VCs with either the layered or spaced configurations. Here, we demonstrated an extremely-thin VC (ETVC) with a three-region hybrid configuration fabricated via a facile laser micro/nano structuring approach, reaching a remarkable effective thermal conductivity of 12032 W/(m.K) with an overall thickness of only similar to 0.22 mm. Cross-arrayed micro-protrusions were fabricated on both the evaporation and condensation regions of the lower plate of the VC, connected by water/vapor passages composed of parallel micro-channels. The micro-channels were designed to make a layered-spaced hybrid configuration to accommodate the fast flow of both water and vapor. The surfaces of both the micro-protrusions and micro-channels were covered with plentiful finer features to render them excellent wicking performances. Such a laser microstructured three-region hybrid configuration enhances all main processes inside a VC (i.e., water evaporation, water condensation, and water/vapor transportation), boosting the self-driven circulation of water/vapor to efficiently homogenize temperature under different heat fluxes. We believe this work can lay a promising rationale for designing and fabricating highly-efficient highly-compact VCs for the increasing thermal management demand within high-end optoelectronics.

Research on Efficient Charging and Highly Reliable Non-Contact Welding Sealing Technology for Ultra-Thin Silicon-Based Vapor Chambers

Experimental study on ultra-thin silicon-based VC for chip-level heat dissipation

High performance and reliable ultra-thin vapor chamber via an optimised second vacuuming and sealing process

Thermal performance of ultra-thin vapor chamber with etched micro-structure for electronics cooling

Laser Microstructuring of Extremely-Thin Vapor Chamber with Hybrid Configuration for Excellent Heat Dissipation

Experimental Investigation on the Thermal Performance of a Large-Size Aluminum Vapor Chamber for Multi-Point Heat Sources

Experimental study of large-area ultra-thin vapor chamber for microelectronic heat dissipation

Design and Fabrication of a Large Area Ultrathin Vapor Chamber Based on Print-Wick-Structuring Technology

Enhanced Heat Spreading Performance of Printed Circuit Boards by Vapor Chamber Implementation

Thermal Performance of a Liquid-cooling Assisted Thin Wickless Vapor Chamber

Heat spreading performance of SiC-based power module with bonded vapour chamber for electric powertrain integration

Fabrication and characterization of ultra-thin vapour chambers with printed copper powder wick

Experimental investigation on enhanced flow and heat transfer performance of micro-jet impingement vapor chamber for high power electronics

A novel ultra-thin vapor chamber with composite wick for portable electronics cooling

Ultra-thin vapour chamber based heat dissipation technology for lithium-ion battery

Experimental Investigation on Ultra-Thin Vapor Chamber with Composite Wick for Electronics Thermal Management

An On‐Chip SiC MEMS Device with Integrated Heating, Sensing, and Microfluidic Cooling Systems

Silicon Vapor Chamber with Hierarchical Micro-/Nano Wicks

A new ultra-thin vapor chamber with composite wick for thin electronic products

An improved vapor chamber with enhanced two-phase transport by using structured surfaces

Dual-scale porous/grooved microstructures prepared by nanosecond laser surface texturing for high-performance vapor chambers