Abstract:Prediction of micropollutant abatements by catalytic ozonation is critical for its process design and optimization in water treatment. In this study, a chemical kinetic model based on ozone (O3) and hydroxyl radical (OH) rate constants (kO3 and kOH) and O3 and OH exposures is proposed for the generalized prediction of micropollutant abatement by homogeneous catalytic ozonation. Several micropollutants with kO3 ranging from <0.15 to 1.0 × 106 M−1 s−1 were spiked in water matrices (deionized water and surface water) and then treated by ozonation alone and homogeneous catalytic ozonation with varying transition metals (Ti2+, Co2+, Ni2+, Zn2+, Cu2+, Mn2+, Fe2+, and Fe3+). The addition of the varying catalysts enhanced the kinetics and yield of OH formation from O3 decomposition to different extent. Consequently, for the same applied O3 doses, higher OH exposures can generally be obtained at the expense of lower O3 exposures during catalytic ozonation with the varying catalysts compared to ozonation alone. The changes in O3 and OH exposures did not considerably influence the abatement of micropollutants with high and moderate O3 reactivities (diclofenac, gemfibrozil, and bezafibrate), whose abatement efficiencies were generally >90% during both ozonation alone and catalytic ozonation with the varying catalysts. In contrast, ozone-resistant micropollutants (2,4-dichlorophenoxyacetic acid, clofibric acid, and ibuprofen) were less effectively abated during ozonation (∼40–60% abatement), and the addition of the varying catalysts could enhance their absolute abatement efficiencies to various extent (∼0–10% in the deionized water and ∼0–22% in the surface water) during catalytic ozonation. Despite the differing catalytic mechanisms of the varying transition metals, the abatement efficiencies of micropollutants by catalytic ozonation could be satisfactorily predicted by the chemical kinetic model using the O3 and OH rate constants of the micropollutants reported in literature and the O3 and OH exposures determined during the treatment processes. These results demonstrate that the chemical kinetic model can provide a useful tool for the generalized prediction of micropollutant abatement by homogeneous catalytic ozonation.

Artificial Intelligence-Implemented Prediction and Cost-Effective Optimization of Micropollutant Photodegradation Using G-C3n4/bi2o3 Heterojunction

Recent Advances in g-C<sub>3</sub>N<sub>4</sub>-Based Photocatalysts for Pollutant Degradation and Bacterial Disinfection: Design Strategies, Mechanisms, and Applications

Intelligent Algorithms Enable Photocatalyst Design and Performance Prediction

Facilitated Prediction of Micropollutant Degradation Via UV-AOPs in Various Waters by Combining Model Simulation and Portable Measurement

Data-driven for accelerated design strategy of photocatalytic degradation activity prediction of doped TiO2 photocatalyst

A novel interpretable machine learning model approach for the prediction of TiO2 photocatalytic degradation of air contaminants

Synergism of Artificial Intelligence and Techno-Economic for Sustainable Treatment of Methylene Blue Dye-Containing Wastewater by Photocatalysis

Artificial intelligence-enabled optimization of Fe/Zn@biochar photocatalyst for 2,6-dichlorophenol removal from petrochemical wastewater: A techno-economic perspective

Prediction of Micropollutant Abatement During Homogeneous Catalytic Ozonation by a Chemical Kinetic Model.

Simulating Micropollutant Abatement During Cobalt Mediated Peroxymonosulfate Process by Probe-Based Kinetic Models

Decontamination of methylene Blue from simulated wastewater by the mesoporous rGO/Fe/Co nanohybrids: Artificial intelligence modeling and optimization

A new tool to predict the advanced oxidation process efficiency: using machine learning methods to predict the degradation of organic pollutants with Fe-carbon catalyst as a sample

Preparation of Multistage Pore TS-1 with Enhanced Photocatalytic Activity, Including Process Studies and Artificial Neural Network Modeling for Synergy Assessment

Molecularly Imprinted Catalytic Membrane Reactor for Improved Advanced Oxidation Degradation Efficiency of Low Concentration Pollutants

Supervised Intelligence Committee Machine to Evaluate Field Performance of Photocatalytic Asphalt Pavement for Ambient Air Purification

Machine learning based-model to predict catalytic performance on removal of hazardous nitrophenols and azo dyes pollutants from wastewater

Application of machine learning models to improve the prediction of pesticide photodegradation in water by ZnO-based photocatalysts

Optimization Of The Electro-Peroxone Process For Micropollutant Abatement Using Chemical Kinetic Approaches

Prediction of g-C3N4-based photocatalysts in tetracycline degradation based on machine learning

Photocatalytic Carbon Hybrids for the Elimination of Diverse Pollutants under Visible Light:Performances, Influencing Factors and Insight into the Novel Mechanism

Micropollutant degradation by UV/H2O2 in drinking water: Facilitated prediction through combination of model simulation and portable measurement