Abstract:Underwater docking greatly facilitates and extends operation of an autonomous underwater vehicle (AUV) without the support of a surface vessel. Robust and accurate control is critically important for docking an AUV into a small underwater funnel-type dock station. In this paper, a docking system with an under-actuated AUV is presented, with special attention paid to control algorithm design and implementation. For an under-actuated AUV, the cross-track error can be controlled only via vehicle heading modulation, so both the cross-track error and heading error have to be constrained to achieve successful docking operations, while the control problem can be even more complicated in practical scenarios with the presence of unknown ocean currents. To cope with the above issues, a control scheme of a three-hierarchy structure of control loops is developed, which has been embedded with online current estimator/compensator and effective control parameter tuning. The current estimator can evaluate both horizontal and vertical current velocity components, based only on the measurement of AUV’s velocity relative to the ground; in contrast, most existing methods use the measurements of both AUV’s velocities respectively relative to the ground and the water column. In addition to numerical simulation, the proposed docking scheme is fully implemented in a prototype AUV using MOOS-IvP architecture. Simulation results show that the current estimator/compensator works well even in the presence of lateral current disturbance. Finally, a series of sea trials are conducted to validate the current estimator/compensator and the whole docking system. The sea trial results show that our control methods can drive the AUV into the dock station effectively and robustly.

Parallel Dynamic Control of Maritime Autonomous Surface Ships for Automatic Berthing

Safety-certified Constrained Control of Maritime Autonomous Surface Ships for Automatic Berthing

Underwater Docking of an Under-Actuated Autonomous Underwater Vehicle: System Design and Control Implementation

Collision-free automatic berthing of maritime autonomous surface ships via safety-certified active disturbance rejection control

State-of-the-Art Research on Motion Control of Maritime Autonomous Surface Ships

Motion Plan Of Maritime Autonomous Surface Ships By Dynamic Programming For Collision Avoidance And Speed Optimization

Concurrent event‐triggered adaptive neural control for MASS under cross‐water scenarios

Collective Dynamics and Control for Multiple Unmanned Surface Vessels

Composite anti-disturbance dynamic positioning for mass switched-unmanned marine vehicles with multisource disturbances and actuator saturation: A switched model method

A Real-Time Collision Avoidance Framework of MASS Based on B-Spline and Optimal Decoupling Control

Shared control of ship autopilots and human pilots for maritime autonomous surface ship in the presence of actuator anomalies

Automatic berthing of unmanned surface vessels with predetermined performance

C3D: Cascade Control with Change Point Detection and Deep Koopman Learning for Autonomous Surface Vehicles

Time-optimal control of ship manoeuvring under wave loads

Collision avoidance for formation of autonomous ships using separation and recovery mechanism combine artificial potential field method

Distributed Motion Control for Multiple Connected Surface Vessels

Virtual guide automatic berthing control of marine ships based on heuristic dynamic programming iteration method

Autonomous collision avoidance method for MASSs based on precise potential field modelling and COLREGs constraints in complex sailing environments

Parallel Ships: an ACP-based Framework for Marine Equipment Testing and Training

Survey on Collision-Avoidance Navigation of Maritime Autonomous Surface Ships

Observer-Based Finite-Time Control for Distributed Path Maneuvering of Underactuated Unmanned Surface Vehicles With Collision Avoidance and Connectivity Preservation