Abstract:Purpose: The aim of this article is to investigate the feasibility of using a statistical shape model (SSM)-based reconstruction technique to derive a scaled, patient-specific surface model of the pelvis from a single standard anteroposterior (AP) x-ray radiograph and the feasibility of estimating the scale of the reconstructed surface model by performing a surface-based 3D/3D matching.Methods: Data sets of 14 pelvises (one plastic bone, 12 cadavers, and one patient) were used to validate the single-image based reconstruction technique. This reconstruction technique is based on a hybrid 2D/3D deformable registration process combining a landmark-to-ray registration with a SSM-based 2D/3D reconstruction. The landmark-to-ray registration was used to find an initial scale and an initial rigid transformation between the x-ray image and the SSM. The estimated scale and rigid transformation were used to initialize the SSM-based 2D/3D reconstruction. The optimal reconstruction was then achieved in three stages by iteratively matching the projections of the apparent contours extracted from a 3D model derived from the SSM to the image contours extracted from the x-ray radiograph: Iterative affine registration, statistical instantiation, and iterative regularized shape deformation. The image contours are first detected by using a semiautomatic segmentation tool based on the Livewire algorithm and then approximated by a set of sparse dominant points that are adaptively sampled from the detected contours. The unknown scales of the reconstructed models were estimated by performing a surface-based 3D/3D matching between the reconstructed models and the associated ground truth models that were derived from a CT-based reconstruction method. Such a matching also allowed for computing the errors between the reconstructed models and the associated ground truth models.Results: The technique could reconstruct the surface models of all 14 pelvises directly from the landmark-based initialization. Depending on the surface-based matching techniques, the reconstruction errors were slightly different. When a surface-based iterative affine registration was used, an average reconstruction error of 1.6 mm was observed. This error was increased to 1.9 mm, when a surface-based iterative scaled rigid registration was used.Conclusions: It is feasible to reconstruct a scaled, patient-specific surface model of the pelvis from single standard AP x-ray radiograph using the present approach. The unknown scale of the reconstructed model can be estimated by performing a surface-based 3D/3D matching.

2D/3D Reconstruction of Patient-Specific Surface Models and Uncertainty Estimation Via Posterior Shape Models

3D Ultrasound Reconstruction Based on Rotational Scanning Coping with Calibration Uncertainty

A System for 3-D Reconstruction of A Patient-Specific Surface Model from Calibrated X-ray Images

3d Reconstruction Of A Patient-Specific Surface Model Of The Proximal Femur From Calibrated X-Ray Radiographs: A Validation Study

Image-based Meshing of Patient-Specific Data:Converting Medical Scans into Highly Accurate Computational Models

Statistical Shape and Deformation Models Based 2D–3D Reconstruction

A 2D/3D correspondence building method for reconstruction of a patient-specific 3D bone surface model using point distribution models and calibrated X-ray images.

Reconstruction of patient-specific 3D bone surface from 2D calibrated fluoroscopic images and point distribution model.

Unsupervised reconstruction of a patient-specific surface model of a proximal femur from calibrated fluoroscopic images.

Statistical Deformable Model-Based Reconstruction of a Patient-Specific Surface Model from Single Standard X-ray Radiograph

Surface Reconstruction of Bone from X-ray Images and Point Distribution Model Incorporating a Novel Method for 2D-3D Correspondence

Robust and accurate reconstruction of patient-specific 3d surface models from sparse point sets: a sequential three-stage trimmed optimization approach

3d Volumetric Intensity Reconsturction From 2d X-Ray Images Using Partial Least Squares Regression

Patient-Specific 3D Reconstruction of a Complete Lower Extremity from 2D X-rays.

Statistical Shape Model-Based Reconstruction Of A Scaled, Patient-Specific Surface Model Of The Pelvis From A Single Standard Ap X-Ray Radiograph

A Robust and Accurate Approach for Reconstruction of Patient-Specific 3D Bone Models from Sparse Point Sets.

Automatic Reconstruction Of 3d Geometry Using Projections And A Geometric Prior Model

Reconstruction of Patient-Specific 3D Bone Model from Biplanar X-Ray Images and Point Distribution Models

An Integrated Approach for Reconstructing Surface Models of the Proximal Femur from Sparse Input Data for Surgical Navigation

3-D reconstruction of a surface model of the proximal femur from digital biplanar radiographs.

Uncertainty Penalized Weighted Least Squares Framework For Pet Reconstruction Under Uncertain System Models