Abstract:The passion fruit peel was subjected to a drying and pulverising process, after which the resulting powder was extracted using an ultrasonic‐assisted ethanol method. The extract was then freeze‐dried, resulting in the production of passion fruit peel extract (PFPE). PFPE was combined with dopamine (DA) to obtain PFPE/PDA solution, which was blended with hydroxypropylmethylcellulose (HPMC) for the preparation and characterisation of the film. The film with the best overall performance was selected for freshness preservation experiments on bananas. The objective of this study was to evaluate the feasibility of blending passion fruit peel extract (PFPE) with polydopamine (PDA) solution and hydroxypropylmethylcellulose (HPMC) to prepare the properties of PFPE/PDA/HPMC composite films for their application in fruit and vegetable packaging. PFPE was extracted by ultrasonic‐assisted extraction method, which is simple, easy to operate and has high extraction efficiency, PFPE and dopamine were subjected to PFPE/PDA solution preparation, which in turn led to the preparation of HPMC, PFPE/PDA/HPMC films at different concentrations (0%, 5%, 10%, 15% and 20%), and 10% PDA/HPMC and PFPE/HPMC films were prepared with PDA and PFPE solutions, respectively. The interactions between the components in the films were analysed by infrared spectroscopy and X‐ray diffractometer, and the colour, mechanical properties, barrier properties and antioxidant activity of the films were determined. The results showed that the addition of PFPE/PDA solution had a positive effect on the performance of the films. The tensile strength of the composite films was 8.21 MPa, the elongation at break was 85.02% and the water vapour transmission was 2.62 × 10−14 g·mm/(cm2·h·Pa) when the content of PFPE/PDA was 20% compared to that of HPMC films; the DPPH radical scavenging rate and hydroxyl radical scavenging rate of the films increased with the increase of PFPE/PDA concentration, and the DPPH radical scavenging rate of the film with 20% additive was 28.71% and the hydroxyl radical scavenging rate was 34.77%, which were much higher than that of the HPMC film. The simulated bananas were stored at room temperature together with the films and stored at 25°C and tested every day, and it was found that the bananas without packaging film began to show browning on the third day, while the film with 20% additive still did not show obvious browning on the fifth day, so the addition of PFPE/PDA could effectively delay the browning of bananas and prolong their shelf life. In summary, this study improves the use value of passion fruit peel waste and provides new effective packaging for fresh bananas, while it can also provide a new way for the development of degradable films from plant extracts.

Food Packaging for Ripening and Preserving Banana Based on Ethylene-Loaded Nanofiber Films Deposited with Nanosized Cyclodextrin Metal-Organic Frameworks and TiO2 2 Nanoparticles

Food packaging for ripening and preserving banana based on ethylene-loaded nanofiber films deposited with nanosized cyclodextrin metal-organic frameworks and TiO2 nanoparticles

A New Nanohybrid Particle Reinforced Multifunctional Active Packaging Film for Efficiently Preserving Postharvest Fruit

Electrospun Nanofibers Containing TiO 2 for the Photocatalytic Degradation of Ethylene and Delaying Postharvest Ripening of Bananas

Electrospun Nanofibers Containing TiO2 for the Photocatalytic Degradation of Ethylene and Delaying Postharvest Ripening of Bananas

Metal-anchored Oxidized Starch-Pullulan Nanofiber Films Enhance Ethylene Adsorption and Banana Preservation

Influence of Nano-TiO2 Modified LDPE Film Packaging on Quality of Strawberry

Impact of nano-CaCO3 -LDPE packaging on quality of fresh-cut sugarcane.

A novel edible packaging film based on chitosan incorporated with persimmon peel extract for the postharvest preservation of banana

Recyclable Bactericidal Packaging Films for Emperor Banana Preservation.

Development and Application of Poly (Lactic Acid)/Poly (Butylene Adipate-Co-Terephthalate)/Thermoplastic Starch Film Containing Salicylic Acid for Banana Preservation

Biodegradable active composite hydrogel packaging for postharvest climacteric bananas preservation

Photocatalytic chitosan-based bactericidal films incorporated with WO3/AgBr/Ag and activated carbon for ethylene removal and application to banana preservation

A novel ZnO-TiO2-Bi2WO6/Carboxymethyl chitosan composite with high antimicrobial activity and visible-light catalytic degradation of ethylene towards banana preservation in hot and humid environments

Preparation of PAN@TiO₂ Nanofibers for Fruit Packaging Materials with Efficient Photocatalytic Degradation of Ethylene.

Construction of TiO2/starch nanocomposite cryogel for ethylene removal and banana preservation

Modified HKUST-1-based Packaging with Ethylene Adsorption Property for Food Preservation

Preparation of Passion Fruit Peel Extract/Polydopamine/Hydroxypropylmethylcellulose Film and Its Application in Banana Preservation

Incorporation of Bayberry Tannin into a Locust Bean Gum/Carboxycellulose Nanocrystals/ZnO Coating: Properties and Its Application in Banana Preservation

Effect of D-Limonene Nanoemulsion Edible Film on Banana (Musa sapientum Linn.) Post-Harvest Preservation

Improvement of cross-linked films based on chitosan/diepoxy-poly (ethylene glycol) incorporating trans -cinnamaldehyde essential oil: Preparation, properties, and application in banana storage