Abstract:Underwater docking greatly facilitates and extends operation of an autonomous underwater vehicle (AUV) without the support of a surface vessel. Robust and accurate control is critically important for docking an AUV into a small underwater funnel-type dock station. In this paper, a docking system with an under-actuated AUV is presented, with special attention paid to control algorithm design and implementation. For an under-actuated AUV, the cross-track error can be controlled only via vehicle heading modulation, so both the cross-track error and heading error have to be constrained to achieve successful docking operations, while the control problem can be even more complicated in practical scenarios with the presence of unknown ocean currents. To cope with the above issues, a control scheme of a three-hierarchy structure of control loops is developed, which has been embedded with online current estimator/compensator and effective control parameter tuning. The current estimator can evaluate both horizontal and vertical current velocity components, based only on the measurement of AUV’s velocity relative to the ground; in contrast, most existing methods use the measurements of both AUV’s velocities respectively relative to the ground and the water column. In addition to numerical simulation, the proposed docking scheme is fully implemented in a prototype AUV using MOOS-IvP architecture. Simulation results show that the current estimator/compensator works well even in the presence of lateral current disturbance. Finally, a series of sea trials are conducted to validate the current estimator/compensator and the whole docking system. The sea trial results show that our control methods can drive the AUV into the dock station effectively and robustly.

Design and Optimize an Aerial Precision Docking System for UAVs Based on Magnetic Vector Fields

Design of Electromagnetic Docking Device for Micro–Nanosatellite

Underwater Docking of an Under-Actuated Autonomous Underwater Vehicle: System Design and Control Implementation

Underwater Electromagnetic Guidance Based on the Magnetic Dipole Model Applied in AUV Terminal Docking

Micro- and Nanosatellite Sensorless Electromagnetic Docking Control Based on the High-Frequency Injection Method

Design and Analysis of an Omnidirectional and Positioning Tolerant AUV Charging Platform

A Multi-Stage Visual Positioning Method for Autonomous Underwater Docking

Optimization of Transmitting Coils Based on Uniform Magnetic Field for Unmanned Aerial Vehicle Wireless Charging System

Unmanned Aerial Vehicle Wireless Charging System With Orthogonal Magnetic Structure and Position Correction Aid Device

Design of a Docking & Charging Device for Unmanned Surface Vehicle (USV)

Autonomous Dynamic Docking of UAV Based on UWB-vision in GPS-denied Environment

Design of Autonomous Bolt Detection System Based on Quadrotor UAV

A trajectory optimization method for reducing magnetic disturbance of an internal combustion engine powered unmanned aerial vehicle

Research on Aerial Autonomous Docking and Landing Technology of Dual Multi-Rotor UAV

Advanced Magnetic Coupler Design With Multi-Directional Anti-Misalignment Capabilities for Wireless Charging Unmanned Aerial Vehicles

Docking Control of Autonomous Aerial Refueling for UAV Based on LQR

A Sub-mother UAV System Capable of Autonomous Aerial Docking

Position and Attitude Controller Design for UAVs Docking Based on Input-to-State Stability Theory

Neural Adaptive Coordinated Docking Control with Improved Prescribed Performance for UAV Aerial Recovery

An Adaptive Dual-Docking Force Control of Ship-Borne Manipulators for UAV-Assisted Perching

Design of Charging Coil for Unmanned Aerial Vehicle-Enabled Wireless Power Transfer