Abstract:The fuel foils in U-Mo/Al monolithic fuel plates will evolve into porous media owing to the formed gas bubbles. Three-dimensional finite element simulations are implemented for the thermo-mechanical behavior in U-Mo/Al monolithic fuel plates with different U-Mo irradiation creep coefficients, and the results of mesoscale normal stress, bubble volume fraction and bubble pressure in the fuel foil are obtained. In the simulations, the mechanistic fission gas swelling model is adopted, considering the dependence of external hydrostatic pressure. The mesoscale normal stress refers to the effective normal stress in the skeleton of porous fuel foil, which relates to the fuel fracture. The numerical results indicate that an irradiation creep coefficient of 2000 x 10(-31) m(3)/MPa can be identified for the current U-10Mo fuel foil, because the calculated fuel-foil thickness increments match well with the experimental data. The influences of U-Mo irradiation creep coefficient on its bubble volume fraction and pore pressure are significant in the vicinity of fuel foil edges and corners. The dangerous regions locate near the fuel foil corners, surrounding the points with maximum mesoscale normal stresses. The enlarged irradiation creep coefficient will result in stress relaxation on the whole, but the through-thickness creep strain components can be heavily magnified. When the irradiation creep coefficient increases from 10 x 10(-31) m(3)/MPa to 1000 x 10(-31) m(3)/MPa, the maximum mesoscale normal stresses will decrease from 58.04 MPa to 28.04 MPa, with a reduction of similar to 52%; while the corresponding through-thickness creep strain components increase by similar to 5%. With an increase of irradiation creep coefficient from 1000 x 10(-31) m(3)/MPa to 2000 x 10(-31) m(3)/MPa, the maximum mesoscale normal stresses increase by similar to 9%, and the corresponding through-thickness creep strain components increase by similar to 219%. The irradiation creep performance should be optimized and an extreme large creep coefficient is not a good choice, because the creep-induced damage might degrade the mesoscale strength of the fuel foil.

On the Critical Mechanisms for the Embrittlement and Strength Degradation of Post-Irradiated U-10Mo Fuels

A Mesoscale Stress Model for Irradiated U 10mo Monolithic Fuels Based on Evolution of Volume Fraction/radius/internal Pressure of Bubbles

Skeleton-creep Based Bubble Growth Model and Multi-Scale Mechanical Constitutive Model for U-10Mo Fuels under Irradiation

Models for Effective Elastic Constants of Irradiated U-10Mo Fuels with Distributed Fission Gas Bubbles

Further Development of the Fission Gas Swelling Model for U-10Mo Fuels

Effects of Porous Fuel Structure on the Irradiation-Induced Thermo-Mechanical Coupling Behavior in Monolithic Fuel Plates

The critical influencing factors responsible for the particle cracking in UMo/Zr dispersion fuel plates during post-irradiation anneal tests

Research on the Homogenized Postirradiation Elastoplastic Constitutive Relations for Composite Nuclear Fuels

Effects of U-Mo Irradiation Creep Coefficient on the Mesoscale Mechanical Behavior in U-Mo/Al Monolithic Fuel Plates

Thermo-mechanical Behavior Simulation Coupled with the Hydrostatic-Pressure-dependent Grain-Scale Fission Gas Swelling Calculation for a Monolithic UMo Fuel Plate under Heterogeneous Neutron Irradiation

Prediction and Deformation Mechanism Analysis of High Porosity in U–10Mo Monolithic Fuels at High Burnup

Contributions to the mechanistic understanding of the microstructural evolution in irradiated U-Mo dispersion fuel

Macro-Mesoscale In-Pile Thermal-Mechanical Behavior Simulation of a UMo/Zr Monolithic Fuel Plate

Modeling of Irradiation-Induced Damage and Failure Behaviors of Fuel Foil/cladding Interface in UMo/Zr Monolithic Fuel Plates

Modeling of Irradiation-Induced Thermo-Mechanical Coupling and Multi-Scale Behavior in a Fully Ceramic-Microencapsulated Fuel Pellet

Effect of Fuel Meat Thickness on the Non-Uniform Irradiation-Induced Thermo-Mechanical Behavior in Monolithic UMo/Al Fuel Plates

Research on In-Pile Thermal-Mechanical Behavior of UMo/Zr Monolithic Fuel Plates

Simulation of the Irradiation-Induced Micro-Thermo-Mechanical Behaviors Evolution in Ads Nuclear Fuel Pellets

Atomic simulations of primary irradiation damage in U-Mo-Xe system

Modeling of irradiation-induced thermo-mechanical coupling behavior in metal matrix microencapsulated fuel

Analysis of Blistering Mechanism for Dispersion-Type Fuel Plates During Irradiation