Abstract:As a crucial component, the vapor cell serves as the fundamental sensing element in various atomic sensors, and electric heating is typically required to enhance the density of alkali metal atoms. Due to the presence of driving current, electric heating can unavoidably introduce interfering magnetic fields, which affect the performance of atomic sensors. To suppress this magnetic field interference, the electric heater trace configuration must be designed to achieve the magnetic field self-suppression effect. However, previous studies have solely focused on the optimization design of a single-sided heater, which leads to the spatial magnetic field gradient and limited improvement of the self-suppression effect. Therefore, this study proposes an optimization design method for the bi-planar heater, and uses the combination optimization of two heater pieces with spatial symmetrical distribution. Using the multi-objective optimization algorithm, the structure parameters and current directions of the heater are optimized to achieve superior magnetic field suppression and reduce the vapor cell magnetic field gradient. Both finite element simulation and experimental results demonstrate that the proposed bi-planar heating configuration generates an average magnetic field of 0.06 nT/mA in the central region of the vapor cell, which is more than three times less than the previous single-sided optimal configuration and more than five times less than the bi-planar symmetrical use of the single-sided optimal configuration. The proposed approach is expected to enhance the performance of atomic magnetometers and other atomic sensors that are sensitive to magnetic fields.

In-situ Suppression of High-Frequency Magnetic Field Generated by the Electric Heater for Atomic Magnetometers

Active Magnetic-Field Stabilization with Atomic Magnetometer

A Spin Self-Sustaining Atomic Magnetometer for High-Precision Measurements in Large Magnetic Fields

Optimal design of bi-planar heater with magnetic field self-suppression configuration based on multi-objective optimization

Coupling of Magnetic Field Noise in Multilayer Magnetic Shields for Atomic Magnetometer

Design of Non-Magnetic Temperature Control System for Atomic Vapor Cell of Atomic Magnetometer

Suppression of thermal coupling noise in the SERF atomic co-magnetometer

Suppressing Spatial Inhomogeneity in Spin Polarization and Light Shift in Atomic Magnetometer Array Using Frequency-Paired Counter-propagating Pumps

Investigation of Magneto-Inductive Sensors for Low Magnetic Field Measurements

Bandwidth Expansion Through Large-Amplitude Modulation and Proportional Feedback for Single-Beam Atomic Magnetometers

Interference in Atomic Magnetometry

Suppression of Current Source Noise with an Atomic Magnetometer

Optimal Design for Electric Heating Coil in Atomic Sensors

Wide-range and Self-Locking Atomic Magnetometer Based on Free Spin Precession

In-situ measurement and cancellation of the light-shift in fiber-coupled atomic magnetometers

Magnetic induction sensor based on a dual-frequency atomic magnetometer

Femtotesla Atomic Magnetometer Employing Diffusion Optical Pumping to Search for Exotic Spin-Dependent Interactions

A Τ−1 Measurement Across Three Orders of Magnitude Based on an Atomic Spin Precession Magnetometer in Self-Sustaining Mode

The micro-fabrication and performance analysis of non-magnetic heating chip for miniaturized SERF atomic magnetometer

A High Sensitivity Closed-Loop Spin-Exchange Relaxation-Free Atomic Magnetometer With Broad Bandwidth

In-situ determination of spin polarization in a single-beam fiber-coupled spin-exchange-relaxation-free atomic magnetometer with differential detection