Abstract:Cement solidification is a commonly used pre-treatment method for municipal solid waste incineration fly ash (MSWIFA) prior to sanitary landfill. However, the long-term environmental risk of cement-solidified MSWIFA blocks in the exposed scenario of zoning sanitary landfill remains unclear. In this study, the leaching characteristics of different heavy metals in cement-solidified MSWIFA blocks under deionized water and acid rain scenarios were firstly investigated. The leaching control mechanisms of heavy metals were also explored and applied to established mechanical models for the estimation of long-term environmental risk. Results revealed that Pb leaching from cement-solidified MSWIFA blocks was controlled by diffusion; Cu, Cr and As leaching was mainly controlled by surface wash-off and diffusion; and Ni leaching was mainly controlled by diffusion and dissolution. Additionally, the established bulk diffusion, first-order reaction/diffusion and diffusion/dissolution models could accurately fit the abovementioned three types of heavy metals with different leaching control mechanisms (R-2 > 0.95). Under acid rain scenarios, according to the prediction results of the calibrated models, the cumulative leaching amount of Pb in 718 d was higher than the limit in GB16889-2008, the cumulative leaching amount of Cu, Cr, As and Ni did not exceed the limit in GB 16889-2008 even in 50 years. Therefore, the long-term environmental risk was relatively high for Pb but was low for Cu, Cr, As and Ni in cement-solidified MSWIFA blocks. This finding could be attributed to the strong alkali environment of cement-solidified MSWIFA blocks (pH > 12) that induced Pb salts (e.g. Pb(OH)(2) and PbSO4) dissolution. Therefore, the removal of partially soluble Pb salts from freshly made cement-solidified MSWIFA blocks by water or natural rainwater (e.g. without final cover system) washing in the initial landfilling stage (e.g. the leachate drainage system remains functional) is an effective countermeasure to reduce the environmental risks in zoning sanitary landfill.

The Promoting Effect of Fe on the Immobilization of Heavy Metals in MSWI FA–lead–zinc Tailings-Based Backfill Materials under Field Application: Dynamic Simulation Leaching and Immobilization Mechanisms

MgO-based Binders with Different Formulations for Solidifying Pb and Cd in MSWI Fly Ash: Solidification Effect and Related Mechanisms

Effect of the MgO/SiO 2 Ratio on MgO–silica Binders Solidifying MSWI Fly Ash

Comparison and mechanism analysis of MgO, CaO, and Portland cement for immobilization of heavy metals in MSWI fly ash

Performance and Hydration Mechanism of MSWI FA-barium Slag-Based All-Solid Waste Binder

The Long-Term Leaching Behavior of Heavy Metals in Geopolymers and Portland Cement Bricks Containing Mswi Fly Ash: A Comparative Study

Leaching and hydrating mechanisms, economic benefits of backfill materials by using coal fly ash-slag-based binder for environmentally sustainable production

Effect of Biostabilization on the Release Potential and Speciation of Heavy Metals in Municipal Solid Waste

Leaching of Heavy Metals from MSWI Fly Ash: Experiments Vs. Simulation

Sustainable and efficient stabilization/solidification of Pb, Cr, and Cd in lead-zinc tailings by using highly reactive pozzolanic solid waste

Immobilization of Heavy Metals from MSWI Fly Ash Using a Novel Cementitious Material: Long-term Leaching Behavior and Mechanism

Heavy Metal Leaching Behaviour and Long-Term Environmental Risk Assessment of Cement-Solidified Municipal Solid Waste Incineration Fly Ash in Sanitary Landfill

Feasibility of using fly ash–slag-based binder for mine backfilling and its associated leaching risks

Characteristics and Leaching Behavior of MSWI Fly Ash in Novel Solidification/stabilization Binders.

Geopolymerization of Mswi Fly Ash and Coal Fly Ash for Efficient Solidification of Heavy Metals: Insights into Stabilization Mechanisms and Long-Term Leaching Behavior

Influence on Fine Lead–zinc Tailings Solidified/stabilised by Clinker-Free Slag-Based Binder

Chemical Speciation, Distribution, and Leaching Behaviors of Heavy Metals in Alkali-Activated Converter Steel Slag-Based Stabilization/solidification of MSWI FA

Solidification/Stabilization of MSWI Fly Ash Using a Novel Metallurgical Slag-Based Cementitious Material

Manufacture of alkali-activated cementitious materials using municipal solid waste incineration (MSWI) ash: Immobilization of heavy metals in MSWI fly ash by MSWI bottom ash

Leaching Behavior and Environmental Risk Assessment of Toxic Metals in Municipal Solid Waste Incineration Fly Ash Exposed to Mature Landfill Leachate Environment

Effect of long-term dry–wet circulations on the Solidification/stabilization of Municipal solid waste incineration fly ash using a novel cementitious material