Abstract:We present the first hardware design that supports operations over the Fano-Elias encoding (FE-encoding). Our design is a combinational circuit (i.e., single clock cycle) that supports insertions, deletions, and queries. FE-encoding allows one to store f binary strings, each of length l+logm using a string that is m+f+fl bits long (rather than f(l+logm) ). The asymptotic gate-count of the circuit is Θ((m+f)⋅lgm+f⋅l) . The asymptotic delay is Θ(lgm+lgf+lgl) . We implemented our design on an FPGA with four combinations of parameters in which the FE-encoding fits in 512 or 1024 bits. We present the first hardware design for a dynamic filter that maintains a set subject to insertions, deletions, and approximate membership queries. The design contains four main blocks: two memory banks that store FE-encodings and two combinational circuits for FE-encoding. Additional logic deals with double buffering and forwarding. We implemented the dynamic filter on an FPGA with the following parameters: (1) Elements in the dataset are 32-bit strings. (2) The supported dataset can contain up to nmax=45⋅214=737,280 elements. (3) The latency is 2-4 clock cycles. (4) Fixed (i.e., constant and stable) throughput. A new operation can be issued every clock cycle. (5) We prove that the probability of a false-positive error is bounded by 0.385⋅10−2 . (6) We prove that the expected number of insertion failures is less than 1 for every 75 million insertions. Synthesis of our filter on a Xilinx Alveo U250 FPGA achieves a clock rate of 100 MHz (the critical path is due to the memory access). We measure a fixed throughput of 97.7 million operations per second (the loss of 2.3% in the throughput is due to instabilities in the bandwidth of the AXI4 Lite I/O channel). A unique feature of our filter implementation is that the throughput is stable and constant for all benchmarks and loads. Namely, the combination of operations does not influence the throughput and the throughput does not depend on the number of elements in the dataset (as long as the cardinality of the dataset is bounded by nmax ). Previous dynamic filter implementations in software (implemented on x86 or GPU's) do not exhibit stable and constant throughputs.

Acceleration of Fast Sample Entropy for FPGAs

Acceleration of Fast Sample Entropy Towards Biomedical Applications on FPGAs

Evaluation of Fast Sample Entropy Algorithms on FPGAs: From Performance to Energy Efficiency

Acceleration of Bucket-Assisted Fast Sample Entropy for Biomedical Signal Analysis.

A Reconfigurable Parallel Acceleration Platform for Evaluation of Permutation Entropy

A Ubiquitous Machine Learning Accelerator With Automatic Parallelization on FPGA

Scalable FPGA-based Architecture for High-Performance Per-Flow Traffic Measurement.

A Domain-Specific Accelerator for Ultralow Latency Market Data Distribution System

Accelerating Millions of Short Reads Mapping on a Heterogeneous Architecture with FPGA Accelerator

The hardware implementation of adaptive non-linear sampling algorithm

An Improved Fpga Implementation Of Sparse Fast Fourier Transform

Towards On-Board SAR Processing with FPGA Accelerators and a PCIe Interface

Unlocking Real-Time Fluorescence Lifetime Imaging: Multi-Pixel Parallelism for FPGA-Accelerated Processing

Design Space Exploration of FPGA-based Accelerators with Multi-Level Parallelism

Novel hardware architecture of sparse recovery based on FPGAs

Application of FPGA Acceleration in ADC Performance Calibration

Fast Sample Entropy Atrial Fibrillation Analysis Towards Wearable Device

Fpga Based Low-Latency Market Data Feed Handler

A Real-Time Signal Measurement System Using FPGA-Based Deep Learning Accelerators and Microwave Photonic

A Micro-architecture that supports the Fano-Elias encoding and a hardware accelerator for approximate membership queries

A Real-Time Permutation Entropy Computation for Eeg Signals