Abstract:Aluminum metal has been regarded as a promising anode material for aqueous metal‐air batteries. However, the stable cycling of Al anodes is challenging due to the severe parasitic corrosion of Al metal in alkaline electrolytes. Here, a novel additive, n‐octylphosphonic acid (OPA), is introduced into the typical NaOH electrolyte system to improve the interfacial stability of Al anodes and thus promote high‐performance Al‐air batteries (AABs). Combining several experimental characterizations and theoretical calculation, it is proved that OPA molecules in an NaOH aqueous environment can modify the Al anode/electrolyte interface and alter the stacking of the discharge product. The electrolyte engineering is capable of anchoring dynamically to restrain side reactions through hydrogen bonds (H···O), homogenizing the dissolution of Al metal and avoiding precipitation agglomeration. As a proof of concept, AABs full cells with an electrolyte containing OPA achieve higher potential plateau and discharge capacity than those with a pure NaOH electrolyte. It paves a way to develop highly‐efficient and eco‐friendly electrolyte additive strategies for high‐performance AABs devices and advance the current understanding of organic additive mechanisms in AABs. n‐octylphosphonic acid (OPA) is proposed as an ideal inhibitor to suppress the self‐corrosion of Al anodes in Al‐air batteries (AABs). AAB full cells with an OPA‐based electrolyte deliver an ultrahigh discharge capacity of 2694 mAh g−1, 91% of their theoretical value (2980 mAh g−1). A practically useful OPA‐based AAB pile is further constructed to power a commercial digital camera steadily.

Regulating H-bonded Network of Aqueous Electrolytes for Stable and Energy-Dense Al-air Batteries

Hydrogen-bond network manipulation of aqueous electrolytes with high-donor solvent additives for Al-air batteries

Simultaneous Regulation on Electrolyte Structure and Electrode Interface with Glucose Additive for High-Energy Aluminum Metal-Air Batteries

Inhibiting Anodic Parasitic Reaction for High-Performance Al-air Batteries Via a Multi-Functional Hybrid Additive

Hydrogen-bonds reconstructing electrolyte enabling low-temperature aluminum-air batteries

Inhibiting hydrogen evolution reaction by adjusting electrophilicity of quaternary ammonium salts for aluminum-air battery

Microstructure Design of Electrolytes for High-Energy-Density Aqueous Batteries

Properties and composition of the spent electrolyte for premium circulation mediated by Al-air batteries.

Strengthen Water O‐H Bond in Electrolytes for Enhanced Reversibility and Safety in Aqueous Aluminum Ion Batteries

Anode Interfacial Layer Construction Via Hybrid Inhibitors for High-Performance Al-Air Batteries.

Quasi‐Solid‐State Aluminum–Air Batteries with Ultra‐high Energy Density and Uniform Aluminum Stripping Behavior

Synergistic modulation of alkaline aluminum-air battery based on localized water-in-salt electrolyte towards anodic self-corrosion

Hybrid Organic–Inorganic Additive for Robust Al Anode in Alkaline Aluminum–Air Battery

Zn-dominated Interphase Inhibits the Anodic Parasitic Reactions for Al-air Batteries Using Zn2+@Agar Hydrogel Membrane

Modification on water electrochemical environment for durable Al-Air Battery: Achieved by a Low-Cost sucrose additive

A self-regulated shielding layer induced by an electrolyte additive for alkaline Al-air batteries

Hybrid high-concentration electrolyte significantly strengthens the practicability of alkaline aluminum-air battery

Initiating a High‐Rate and Stable Aqueous Air Battery by Using Organic N‐Heterocycle Anode

Dynamic Locking of Interfacial Side Reaction Sites Promotes Aluminum‐Air Batteries Close to Theoretical Capacity

Designing electrolyte structure to suppress hydrogen evolution reaction in aqueous batteries

Influence of an Imidazole-Based Ionic Liquid As Electrolyte Additive on the Performance of Alkaline Al-air Battery