Abstract:The earthquake-induced applicability of key components of the existing high-speed railway CRTS II ballastless track-continuous girder bridge system (HSRCCB) is not clear. The fine simulation model of the HSRCCB is developed herein. Latin hypercube sampling is used to consider the uncertainty of ground motion and HSRCCB modeling parameters. Earthquake-induced residual deformation sample database for key components of the HSRCCB under near-field rare earthquakes is constructed. Furthermore, overlimit state analysis and applicability evaluation of bridge key components are performed using the statistical inference method. The characteristic curve of earthquake-induced residual deformation for track key components is developed using the hypothesis testing principle and statistical inference method, and the overlimit state analysis and applicability evaluation are carried out accordingly. The results show that after the near-field rare earthquake, the bearing undergoes large transverse residual deformation, as well as a longitudinal residual deformation. The box girder has an obvious transverse offset; However, the transverse and longitudinal residual deformation of track key components is smaller than that of the bearing. The maximum overlimit rate of residual deformation of fixed bearing and sliding bearing is 98%, indicating that most of the bearing gets destroyed during the process. Earthquake-induced bending and shear failure do not commonly occur at the abutment/pier bottom. The longitudinal residual deformation overlimit rate of the sliding layer and friction plate is relatively large, reaching more than 82% and 47%, respectively. Shear slots, shear steel bars, and fasteners are not easy to overrun. The overlimit rate of transverse residual deformation of lateral blocks is low, CA mortar and fasteners residual deformation overlimit rate tends to be 0. The bearing is no longer applicable. The shear force and bending moment at the abutment/pier bottom, shear slots, shear steel bars, CA mortar, and fasteners applicability all meet the requirements, while the sliding layer, friction plate, and lateral blocks are difficult to meet the applicability requirements. Among them, the applicability index value of the longitudinal residual deformation of the sliding layer is as high as 181.94, indicating that the sliding layer is far from meeting the seismic design requirements of near-field rare earthquakes. Thus, attention should be paid to the seismic design.

Damage Dispersion Study of High-Speed Railway Track-Bridge System with the UCSD Considering Train Effects

Seismic Response of Isolated Railway Bridge Subjected to Near-fault Ground Motion

Effect of Rail Restraints on Seismic Responses of Cushioning Railway Bridges

Effects of shear panel dampers on seismic response mitigation of high-speed railway simply supported bridge-track system under far-field and near-field ground motions

Seismic response of CRTS II ballastless track-bridge system considering the damage of track structure

A Combination Strategy of Hollow-Closed-wall In-Filled Trench and Elastic Bearing for Reducing Environmental Vibration Induced by High-Speed Train

Effect of Lateral Deformations of a Simply-Supported Beam Bridge on High-Speed Railway Traffic Safety under Earthquake Action

Applicability of existing CRTS II ballastless track – Continuous girder bridge system under near-field transverse rare earthquake

The influence of trains on the seismic response of simply-supported beam bridges with different pier heights expressed through an impact factor

Running safety and seismic optimization of a fault-crossing simply-supported girder bridge for high-speed railways based on a train-track-bridge coupling system

Study on the dynamic response correction factor of a coupled high-speed train–track–bridge system under near-fault earthquakes

Influence of damping on seismic-induced track geometric irregularity spectrum in high-speed railway track-bridge system

Study on the influence of trains on the seismic response of high-speed railway structure under lateral uncertain earthquakes

A novel evaluation of train running safety on the HSR bridges under earthquakes based on the observed track deformation rate

Simplified linear analysis model of longitudinal constraint effect of high-speed railway simply-supported bridge under frequent earthquake

Seismic applicability analysis of high-speed railway multi-span simply-supported bridges based on simplified model

Lateral Vibration Mitigation for Coupled High-Speed Rail Vehicle and Cable-Stayed Bridge System Subjected to Ground Motions

Damage Analysis of High-Speed Railway Bridge-Track System with Unequal Pier Heights Under Near-Fault Earthquake Based on FK-FE Method

Velocity pulse effects of near-fault earthquakes on a high-speed railway vehicle-ballastless track-benchmark bridge system

Study on the estimate for seismic response of high-speed railway bridge-track system

Seismic response of benchmark high-speed rail (HSR) round-ended rectangular-shaped cross-section solid (RERSCSS) concrete pier based on the shaking table tests