Abstract:Sulfate erosion is one of the most complex and harmful chemical corrosion actions. Following sulfate erosion, concrete expands, cracks, dissolves, peels off, and decreases in strength, which affects the durability of structures. Polypropylene fiber (PP) is widely used in various concrete structures because of its good mechanical properties and chemical corrosion resistance. However, PP fiber has a number of shortcomings, such as a smooth surface, poor hydrophilicity, lack of active groups in the molecular chain, and agglomeration and poor dispersion in cement-based materials. These issues limit its application in cement-based materials. Although the use of a silane coupling agent to modify the surface of PP fiber is effective, the influence of treated PP fiber on the sulfate resistance of cement-based materials is not significant. In this study, a PP fiber treated with a silane coupling agent was used to examine effects of different cement-to-sand ratios (C/S) and dosages of the treated PP fiber on the sulfate erosion resistance of cement mortar. Furthermore, the apparent morphology, mass loss rate, flexural strength, corrosion resistance coefficient, and microstructure of the concrete were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results revealed that the PP fiber became rough after modification. Active groups were introduced on the fiber surface, which were well dispersed in the mortar and formed a good network distribution structure in the cement mortar, thereby slowing the erosion rate of the PP fiber mortar in a sodium sulfate solution. At a C/S ratio of 1:1 and a treated fiber dosage of 0.6%, the treated fiber mortar has exhibited good sulfate resistance. In addition, the monofilament fiber immersion test revealed that a layer of sodium sulfate crystals was deposited on the fiber surface, thereby increasing the roughness of the fiber surface and the pull-out force of the fiber from the cement matrix, this result indicated that the interfacial adhesion between the treated PP fiber and cement matrix was improved, which in turn led to the improvement in the sulfate erosion resistance of the treated PP fiber.

Effect of Polypropylene Fibers on Mechanical and Wetting Properties of Overall Superhydrophobic Foamed Concrete

Experimental study on effects of polypropylene fiber on early-age shrinkage in concrete

Designing a superhydrophobic quality and strengthening mechanism for foam concrete

The effects of steel, polypropylene, and high-performance macro polypropylene fibers on mechanical properties and durability of high-strength concrete

Influence of Fiber Type on Mechanical Properties of Lightweight Cement-Based Composites

Research about the Effect of Polypropylene Fiber on Mechanical Properties of Curing Sludge

Rheological and tribological behaviors of polypropylene fiber reinforced concrete

Effect of fiber type on the mechanical properties and durability of hardened concrete

Microscopic, physical and mechanical analysis of polypropylene fiber reinforced concrete

Effect of Polyoxymethylene Fiber on the Mechanical Properties and Abrasion Resistance of Ultra-High-Performance Concrete

Effect of the addition of polypropylene fiber on concrete properties

Mechanical Properties and Microstructure of Cellulose Fiber- and Synthetic Fiber-Reinforced High-Strength Concrete

Effect of Surface Treatment of Polypropylene (PP) Fiber on the Sulfate Corrosion Resistance of Cement Mortar

Effect of Polypropylene Fibers on some Mechanical Properties of Concrete and Durability against Freezing and Thawing Cycles

Effect of calcined diatomaceous earth, polypropylene fiber, and glass fiber on the mechanical properties of ultra-high-performance fiber-reinforced concrete

Study on PP fiber in waterproof concrete

Experimental study and numerical simulation of the effect of different fiber types on the basic mechanical properties of shotcrete

The flexural behaviors and mechanism of wollastonite microfiber modified ultra-high performance concrete with steel fiber from micro to macro scale

Experimental Research on Properties of Foamed Concrete Reinforced with Polypropylene Fibers

Experimental study on pore structure characteristics and thermal conductivity of fibers reinforced foamed concrete

Review on the Durability of Polypropylene Fibre-Reinforced Concrete