A Polarization-Sensitive Visible Broadband Absorber Based on a Phase-Modulation Metasurface

Liye Li,Wengang Wu

DOI: https://doi.org/10.1364/cleo_at.2024.jtu2a.150

2024-01-01

Abstract:We propose a polarization-sensitive visible broadband absorber based on a phase-modulation metasurface. The measured average absorptivity of the y-polarized beam reaches 76.8%, and the x-polarized reflectivity is 56.4%, with angle robustness and working band tunability.

What problem does this paper attempt to address?

Omnidirectional, Thin Metasurface Exhibiting Selective Absorption for Un-Polarized Broadband Incidence

Qiansen Xie,Huajun Feng,Shangliang Wu,Xu Liu,Zhihai Xu

DOI: https://doi.org/10.1364/oe.467446

IF: 3.8

2022-01-01

Optics Express

Abstract:Thin devices with large areas have strong and omnidirectional absorption over a wide bandwidth and are in demand for applications such as energy harvesting, structural color, and vehicle LiDAR (laser detection and ranging). Despite persistent efforts in the design and fabrication of such devices, the simultaneous realization of all these desired properties remains a challenge. In this study, a 190-nm-thick metasurface with an area of 3 cm2, incorporating dielectric cylinder arrays, a chromium layer, a silicon nitride (SiNx) layer, and an aluminum layer is theoretically and experimentally demonstrated. The developed device achieves an average absorptivity of ∼99% (97% in the experiment) in the entire visible spectrum 400-700 nm. Moreover, it exhibits strong absorption over a wide range of incident angles (∼91% and 90% at 60° in the calculation and experiment, respectively). Importantly, the feasibility of applying the developed metasurface absorber to solar thermophotovoltaics and vehicle LiDAR (laser detection and ranging) has been explored. Moreover, the photoresist can be replaced by other glues and easily scaled up to a large area using the roll-to-roll nanoimprinting process. With the excellent spectral properties and performance, this device is promising for large-area applications.
Broadband Metamaterial Absorber with an In-Band Metasurface Function.

Wenjie Chen,Rui Chen,Yi Zhou,Yungui Ma

DOI: https://doi.org/10.1364/ol.44.001076

IF: 3.6

2019-01-01

Optics Letters

Abstract:Metamaterials (MMs) have received wide attention due to their strong ability to control wave propagation. Here we propose a thin MM that can realize broadband absorption, as well as in-band phase-controlled reflection. It absorbs more than 90% energy of the incident circularly polarized (CP) light between 7.94-9.76 and 10.99-12.26 GHz and, meanwhile, works as a half-wave plate near 10.35 GHz. The schemes based on both natural and artificial magnetic materials have been discussed to produce the anisotropic phase. A reflection beam steering metasurface is proposed using the absorption-selective MM. The metasurface-integrated MM absorber may have important applications in aerospace technologies such as radome.
Active Metamaterial Absorber with Controllable Polarisation and Frequency

Xianliang Zeng,Linxi Zhang,Guobin Wan,Meng Gao

DOI: https://doi.org/10.1049/el.2017.1618

2017-01-01

Electronics Letters

Abstract:An active metamaterial absorber with electrical control of both polarisation and frequency is presented. The unit cell of the proposed absorber consists of an outer circular ring and an inner Jerusalem cross with two pin diodes mounted between. Tuning the diodes ON/OFF states, the absorption response of the metamaterial structure can be switched between two performances. As biasing the diodes OFF, a dual-band absorption response with polarisation-independent characteristics can be achieved. Although regarding to ON state, a polarisation-dependent performance is exhibited. Specifically, the same dual-band absorption response can be still obtained with respect to the incident wave with electrical field along the x-axis, whereas a different single band of absorption is obtained with electrical field along the y-axis. The simulated and measured verifications are presented and the results demonstrate the proposed controllable absorption performances.
Design Of A Polarization-Insensitive Wideband Tunable Metamaterial Absorber Based On Split Semi-Circle Ring Resonators

Shaonan An,Haibing Xu,Yulu Zhang,Song Wu,Jianjun Jiang,Yun He,Ling Miao

DOI: https://doi.org/10.1063/1.4993717

IF: 2.877

2017-01-01

Journal of Applied Physics

Abstract:In this paper, a polarization-insensitive wideband tunable metamaterial absorber is designed and fabricated. The equivalent circuit model for the absorber has been proposed to describe its absorption phenomenon. The proposed absorber is constructed by a periodic array of unit, which contains four split semi-circle ring resonators with 90 degrees rotated. The symmetric structure of the unit gives rise to polarization-insensitivity. Furthermore, the field distribution and the circuit model of the absorber are studied to demonstrate its absorption mechanism. Measurement results show that the proposed metamaterial absorber obtains a reflectivity of less than -10 dB covering 2.1-2.5 GHz and 3.1-6.8 GHz with the total thickness of 8.8 mm, and the reflectivity performance covering the spectrum from 3.1 GHz to 6.8 GHz could be adjusted by tuning the bias voltage on the PIN diodes. Published by AIP Publishing.
Ultra-Broadband and Polarization-Insensitive Metamaterial Absorber Based on Frequency Selective Surface

Haibing Xu,Shaowei Bie,Jianjun Jiang

DOI: https://doi.org/10.1109/metamaterials.2016.7746414

2016-01-01

Abstract:In this letter, we report the fabrication, and measurement of an ultra-broadband polarization insensitive metamaterial absorber (MA), consisting of three layers. The EW and flaky carbonyl iron powders were used to produce two kinds of silicone rubber matrix magnetic composites for the top and the bottom layer, respectively. The middle layer is frequency selective surface (FSS) in the form of single square loop. The results show that the proposed 2.0 mm thick RAM can provide a 10 -dB reflectivity over the frequency range of 5.35-18 GHz and exhibit polarization-insensitive properties over the whole range of 2-18 GHz. Experimental results were in good agreement with simulated ones.
Design of an Ultrabroadband Visible Metamaterial Absorber Based on Three-Dimensional Metallic Nanostructures

Hao Luo,Yong Zhi Cheng

DOI: https://doi.org/10.1142/s0217984917502311

2017-01-01

Modern Physics Letters B

Abstract:We present the design and numerical simulations of an ultrabroadband visible metamaterial absorber (MMA) with polarization-insensitive and wide-angle based on three-dimensional (3D) metallic nanostructure. Distinct from previous designs, the proposed visible MMA only consisted of structured 3D metallic film constructed with an assembly of four vertical split-rings (FVSR) structure. For the optimized design of our MMA, the absorbance of over 90% with a relative bandwidth of 94.8% can be obtained. Further simulation results indicate that our design is polarization-insensitive and also operated well in a wide range of incident angles for both TE and TM modes. In addition, the designed visible MMA design can tolerate some geometric parameters errors in fabrication. Thus, the proposed visible MMA can be potential application in the photodetectors, thermal imaging, photoelectrochemical, and solar energy harvesting devices.
Metasurface Broadband Solar Absorber

A. K. Azad,W. J. M. Kort-Kamp,M. Sykora,N. R. Weisse-Bernstein,T. S. Luk,A. J. Taylor,D. A. R. Dalvit,H.-T. Chen

DOI: https://doi.org/10.1038/srep20347

2015-09-23

Abstract:We demonstrate a broadband, polarization independent, omnidirectional absorber based on a metallic metasurface architecture, which accomplishes greater than 90% absorptance in the visible and near-infrared range of the solar spectrum, and exhibits low emissivity at mid- and far-infrared wavelengths. The complex unit cell of the metasurface solar absorber consists of eight pairs of gold nano-resonators that are separated from a gold ground plane by a thin silicon dioxide spacer. Our experimental measurements reveal high-performance absorption over a wide range of incidence angles for both s- and p-polarizations. We also investigate numerically the frequency-dependent field and current distributions to elucidate how the absorption occurs within the metasurface structure. Furthermore, we discuss the potential use of our metasurface absorber design in solar thermophotovoltaics by exploiting refractory plasmonic materials.

Optics
Design of A Wide-angleÃ¯Â¼ÂBroadband and Polarization Insensitivity Metamaterial Absorber

Yang Yi,Young Jun Song,Fan Shi

2018-01-01

Abstract:This paper proposes a metamaterial absorber based on resistive film structure.With the incident angle of the electromagnetic wave not exceeding 45°, this metamaterial absorber can achieve a perfect absorption rate higher than 99% in a frequency range of more than 3 GHz, the absorption rate higher than 90% can completely cover the Ku- and K-band, and it also has a wide-anglei¼broadband and polarization insensitivity absorbing performance.
Polarization-Selective Bidirectional Absorption Based on a Bilayer Plasmonic Metasurface

Tong Li,Bin-Quan Chen,Qian He,Li-An Bian,Xiong-Jun Shang,Guo-Feng Song

DOI: https://doi.org/10.3390/ma13225298

IF: 3.4

2020-11-23

Materials

Abstract:We propose an alignment-free and polarization-selective bidirectional absorber composed of a one-dimensional bilayer Au grating array buried in a silicon nitride spacer. The absorptivity of the designed structure is more than 95% (77%) under normal forward (backward) TM-polarized light incidence, and is more than 80% (70%) within a forward (backward) incident angle up to 30°. The great bidirectional absorption performance is illustrated by the resonance coupling of the surface plasmon polaritons (SPPs) resonance, the propagating surface plasmon (PSP) resonance and the localized surface plasmon (LSP) resonance under TM-polarized wave illumination. Moreover, the excitation of the Fano-like resonance mode of the proposed metasurface can produce two significantly different peaks in the absorption spectrum under the oblique TM-polarized incidence, which is beneficial for the plasmon-sensing application. Therefore, the proposed bidirectional metasurface absorber can be a candidate in the application of optical camouflage, thermal radiation, solar cells and optical sensing.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Multi-polarization selective absorber based on terahertz metasurface

Yu Tian,Zhengfei Yin,Xingchen Zhao,Jiawei Wang,Pu Liu,Kun Zhang,Weijin Kong

DOI: https://doi.org/10.1016/j.rinp.2023.107134

IF: 4.565

2023-11-01

Results in Physics

Abstract:Tunable absorbers attract much attention due to their wide applications, such as integrated optical sensors, multiplexing far-field imaging and so on. In this paper, we design a multi-polarization selective absorber based on terahertz metasurface, whose geometric symmetry is tunable to satisfy the requirements of linear and circular polarization selective absorbers. At the ON state, the metasurface selectively absorbs y-polarized wave at 1.0 THz, with the linear dichroism of 0.84. At the OFF state, the metasurface selectively absorbs left circularly polarized wave at 1.16 THz, with the circular dichroism of 0.81. The physical mechanism of the metasurface is explained by the Jones calculus and the electromagnetic field distributions. In addition, the multi-polarization selective behavior is insensitive to the incident angle. Finally, we design a sample to verify the potential application of the metasurface absorber, which displays multiplexing imaging of ‘C’, ‘mirrored C’, ‘O’ and blurred images under different polarized incidences at different states. Such a metasurface, switching between linear polarization selective absorber and circular polarization selective absorber, may achieve stable applications in multifunction integrated absorbers, detectors, and image encryptions.

physics, multidisciplinary,materials science
Numerical study of an ultra-broadband, wide-angle, polarization-insensitive absorber in visible and infrared region

Yang Wang,Xue-Fei Xuan,Lu Zhu,Hai-Jun Yu,Qiang Gao,Xian-Lei Ge

DOI: https://doi.org/10.1016/j.optmat.2021.110902

IF: 3.754

2021-04-01

Optical Materials

Abstract:<p>An ultra broadband high-performance metamaterials absorber is designed based on the Fabry-Perot resonance effect and hybrid coupling theory. In this paper, we use the numerical method to analyze the absorption characteristics of the absorber under the conditions of wide band, different polarization states and large angle oblique incidence. The results reveal that the absorption band of the absorber is 300 nm–3000 nm, and its average absorption rate exceeds 93%. In addition, the absorptivity of the absorber is less affected by the polarization angle and incident angle of the incident light. The physical mechanism of wide-band high-absorption is analyzed, which is mainly caused by Fabry-Perot resonance, surface plasmon resonance, local surface plasmon resonance and the hybrid coupling among them. The proposed metamaterial absorber is expected to play a role in invisible devices, solar cells and other fields owing to its wide absorption bandwidth, high absorption, independent to polarization and stable at wide-angle of incidence.</p>

materials science, multidisciplinary,optics
Long‐Infrared Broadband Polarization‐Sensitive Absorber with Metasurface Based on Ladder Network

Haihong Yu,Zhongzhu Liang,Xiaoyan Shi,Fuming Yang,Haiyang Xu,Zhe Wu,Rui Dai,David R. Smith,Yichun Liu

DOI: https://doi.org/10.1002/adom.202401104

IF: 9

2024-08-06

Advanced Optical Materials

Abstract:The absorber with metasurface based on a ladder network has broadband absorption and polarization‐sensitive properties. The absorption spectrum is widened by adding horizontal bars to conventional gratings. It has a high extinction rate in the long‐IR range. It combines the functionalities of conventional optical absorbers and polarizers. It can maintain absorption stability under oblique incidence. Plasmonic resonant and metamaterial structures allow for manipulating the polarization properties of electromagnetic waves to achieve polarization beam splitting. Broadband polarization‐sensitive metamaterial absorbers based on surface plasmon polaritons have the advantages of high‐energy utilization and excellent stability, which may replace traditional polarizing devices. Here, an absorber based on a ladder network construction is designed theoretically and investigated experimentally. The absorber can possess almost 92% average absorptivity for TM polarization light in 8–12 μm range (experimental result: 83% from 7 to 11 μm). It is especially sensitive to the polarization angle of incident light, and with the increase of polarization angle, the broadband absorption response can present analogously monotonous reduction. The theoretical and experimental results for TE polarization light are 12% and 25%, respectively. The broadband absorption response performs angle insensitive property under oblique incidence. The proposed metamaterial absorber opens a path to realize broadband polarization‐sensitive absorption based on simple nanostructure. It will possess great potential applications in high‐performance polarimetric photodetectors and imaging fields.

materials science, multidisciplinary,optics
Polarization-dependent Bi-Functional Metasurface for Directive Radiation and Diffusion-Like Scattering

Li Cui,Wenjun Wang,Guowen Ding,Ke Chen,Junming Zhao,Tian Jiang,Bo Zhu,Yijun Feng

DOI: https://doi.org/10.1063/1.4998205

IF: 1.697

2017-01-01

AIP Advances

Abstract:In this paper, we design a bi-functional metasurface with different spatial distribution of reflection phase responses depending on the incident polarization. The metasurface with a thickness of only 0.067 λ0 (λ0 is the working wavelength) is constructed by unit cells composing two orthogonal I-shaped metallic structures, and the reflection phase for x- and y-linearly polarized incidence can be independently controlled by the geometric parameters. The metasurface can work as a flat parabolic reflector antenna with a maximum gain reaching about 22 dBi around 9.5 GHz, when it is illuminated by the x-polarized feed source of an offset open-ended waveguide antenna. Meanwhile, designed with randomly distributed reflection phases, the proposed metasurface can behave as an electromagnetic (EM) diffusion-like surface, which is capable of suppressing the backward scattering in a broadband from 8.5 GHz to 14 GHz for y-polarized incidence. By this strategy of EM functionality integration, a metasurface reflector antenna equipped with stealth technique to achieve simultaneously high gain and low backward scattering is obtained. Finally, experiments have been carried out to demonstrate this design principle, which agree with the simulation results. The proposed metasurface could offer a promising route for designing EM devices with polarization-dependent multi-functionalities.
Polarization-Insensitive Ultra-wideband Metamaterial Absorber for C- and X-bands

Khalid Majeed,Shahab Ahmad Niazi,O. Altintas,Muhammad Abuzar Baqir,M. Karaaslan,Abdul Khaliq

DOI: https://doi.org/10.1007/s11468-023-02165-5

IF: 2.726

2024-01-06

Plasmonics

Abstract:This paper presents the design and analysis of a metamaterial-based wideband microwave absorber in the C- and X-band, comprised of lumped resistors, having thicknesses of the order of 0.05 λ mm. The structure was micro-machined on the FR-4 sheet in a periodically arranged array of 15 × 15 unit cells. These unit cells have a dimension of 12 × 12 mm each. The proposed absorber design presents excellent broadband absorption characteristics with relative bandwidth (RBW) of 85.05% covering a bandwidth of 8.02 GHz ranging from 5.42 to 13.44 GHz. The absorption mechanism has been explained with the help of characteristic impedance and surface current densities in the operating region. The designed absorber shows polarization angle independency and wide incidence angle stability for the incident microwaves. The results of the prototype are compared with the simulated results illustrating excellent compatibility with the simulation results. Absorber structure may find its potential use in camouflage applications during war times.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry, physical
An Ultra-wide-angle Metasurface Absorber Operating in the Ultraviolet to Visible Range

Tong Li,Chengqing Bao,Pan Huang,Qian He,Guofeng Song

DOI: https://doi.org/10.1016/j.optcom.2024.130811

IF: 2.4

2024-06-22

Optics Communications

Abstract:Here, we propose an ultra-wide-angle metasurface absorber. It consists of a one-dimensional titanium grating periodic array with dislocation distribution. The average absorptivity of the absorber exceeds 94% in the ultraviolet to visible light band (200–760 nm) under normal TM-polarized incident wave. This benefits from the coupling of propagating surface plasmon resonance, local surface plasmon resonance, and hybrid mode resonance. For normal TE-polarized incident wave, the absorber achieves perfect narrowband absorption (>99.22%) in the ultraviolet light region because of the excitation of cavity-mode resonance. The absorber exhibits broadband absorption with an average absorptivity exceeding 85% in the visible light band because of the excitation of slot mode. These excellent absorption properties are well retained at 70° oblique incidence. The structural symmetry of the absorber dramatically expands the flexibility of device applications. It can achieve great absorption performance in an ultra-wide-angle range of 280° along the incident light direction. In addition, the absorber is sensitive to the polarization angle and incident angle of ultraviolet light, which can be used for ultraviolet detection and sensing. The proposed ultra-wide-angle metasurface absorber has potential application in the field of optical communication, photoelectric detection, and solar energy harvesting.

optics
Polarization Insensitive Metamaterial Absorber with Wide Incident Angle

B. Zhu,Z. Wang,C. Huang,Y. Feng,J. Zhao,T. Jiang

DOI: https://doi.org/10.2528/pier10011110

2010-01-01

Abstract:This paper presents the design, fabrication and measurement of a polarization insensitive microwave absorber based on metamaterial. The unit cell of the metamaterial consists of four-fold rotational symmetric electric resonator and cross structure printed on each side of a print circuit board to realize both electric and magnetic resonances to achieve efficient absorption of the incident microwave energy. Both the full wave electromagnetic simulation and the measurement on the fabricated absorber demonstrate high microwave absorption upto 97% for different polarized incident electromagnetic waves. To understand the mechanism, analysis is carried out for the electromagnetic field distribution at the resonance frequency which reveals the working mode of the metamaterial absorber. Moreover, it is verified by experiment that the absorption of this kind of metamaterial absorber remains over 90% with wide incident angler ranging from 0 degrees to 60 degrees for both transverse electric wave and transverse magnetic wave.
Polarization-Angle-Insensitive Dual-Band Perfect Metamaterial Absorbers in the Visible Region: A Theoretical Study

Zhihui Xiong,Zhixi Li,Guangqiang He,Kecheng Su,Yien Huang,Guowei Deng

DOI: https://doi.org/10.3390/coatings14020236

IF: 3.236

2024-02-18

Coatings

Abstract:Metamaterial absorbers have been studied extensively due to their potential applications in the field of photonics. In this paper, we propose a simulation study of a polarization-angle-insensitive dual-band perfect metamaterial absorber with absorption peaks at 654 and 781 nm, respectively. By adjusting the structure parameters, dielectric thickness, and refractive index, the obtained absorber has high scalability in the visible wavelength region. To further understand the performance of the cross-structure absorber, analysis of its electric and magnetic field distribution shows that it produces two resonance modes leading to different absorption properties. In addition, the position and intensity of the absorption peaks were found to be unchanged with increasing incident polarization angle, indicating that the absorber is insensitive to the polarization of the incident light. The absorber has great flexibility and has good application potential in sensing and detection.

materials science, multidisciplinary,physics, applied, coatings & films
Narrowband-to-broadband switchable and polarization-insensitive terahertz metasurface absorber enabled by phase-change material

S Hadi Badri,M M Gilarlue,Sanam SaeidNahaei,Jong Su Kim

DOI: https://doi.org/10.1088/2040-8986/ac3c50

IF: 2.1

2022-01-06

Journal of Optics

Abstract:Abstract A terahertz absorber with controllable and switchable bandwidth that is insensitive to polarization is of great interest. Here, we propose and demonstrate a metasurface absorber with switchable bandwidth based on a phase-change material of vanadium dioxide (VO 2 ) and verify its performance by finite element method simulations. The metasurface absorber is composed of a hybrid cross fractal as a resonator separated from a gold ground plane by a polyimide spacer. Switching from narrowband to broadband absorber is achieved via connecting VO 2 patches to the gold first-order cross fractal converting the resonator to a third-order cross fractal. In the insulator phase of VO 2 , the main narrowband absorption occurs at the frequency of 6.05 THz with a 0.99 absorption and a full-width half-maximum (FWHM) of 0.35 THz. Upon insulator-to-metal transition of VO 2 , the metasurface achieves a broadband absorption with FWHM of 6.17 THz. The simulations indicate that by controlling the partial phase transition of VO 2 , we can tune the bandwidth and absorption level of the absorber. Moreover, the designed absorber is insensitive to polarization due to symmetry and works well for a very wide range of incident angles. In the metallic state of VO 2 , the absorber has an absorption exceeding 0.5 in the 3.57–8.45 THz frequency range with incident angles up to 65°.

optics
Dispersion-Engineered, Broadband, Wide-Angle, Polarization-Independent Microwave Metamaterial Absorber

Ting Shi,Lei Jin,Lei Han,Ming-Chun Tang,He-Xiu Xu,Cheng-Wei Qiu

DOI: https://doi.org/10.1109/tap.2020.3001673

IF: 5.7

2021-01-01

IEEE Transactions on Antennas and Propagation

Abstract:In this article, by deliberately controlling multiple resistive electric and magnetic resonances in terms of dispersion and dissipation, a low-profile, wideband, microwave metamaterial absorber with wide-angle and polarization-independent responses is proposed. The proposed absorber comprises a planar array with resistance-loaded metallic cross patterns, and a vertical periodic crossed mesh array with resistance-loaded metallic ring patterns. The vertical periodic crossed mesh array was inserted between the planar array and the metal ground to improve the wide-angle polarization-independent absorption. The involved dispersion-engineered design strategy for angular- and polarization-insensitive responses is described with numerical evidences and electromagnetic response behaviors. A proof-of-concept absorber was fabricated and measured for verification. At quasi-normal incidence, the measured bandwidth characterized by more than 90% absorption was 2.11–3.89 GHz, i.e., a fractional bandwidth (FBW) of 59.3%. At the incident angle of 50°, the FBW of the absorption larger than 90% was 48.6%. The absorber was thin with a thickness of 13 mm, corresponding to $0.09lambda _{0}$ at the lowest operating frequency. The numerical and experimental results demonstrated that our proposed strategy provides an effective way to achieve wide-angle and polarization-independent responses in a broadband; these responses are very promising for most strategic applications.

telecommunications,engineering, electrical & electronic
Selective wave-transmitting electromagnetic absorber through composite metasurface

Zhiwei Sun,Junming Zhao,Bo Zhu,Tian Jiang,Yijun Feng

DOI: https://doi.org/10.1063/1.5000404

IF: 1.697

2017-01-01

AIP Advances

Abstract:Selective wave-transmitting absorbers which have one or more narrow transmission bands inside a wide absorption band are often demanded in wireless communication and radome applications for reducing the coupling between different systems, improving anti-jamming capability, and reducing antennas' radar cross section. Here we propose a feasible method that utilizing composite of two metasurfaces with different polarization dependent characteristics, oneworks as electromagnetic polarization rotator and the other as a wideband polarization dependent electromagneticwave absorber. The polarization rotator produces a cross polarization output in the wave-transmitting band, while preserves the polarization of the incidence outside the band. The metasurface absorber works for certain linear polarization with a much wider absorption band covering the wave-transmitting frequency. When combining these two metasurfaces properly, the whole structure behaves as a wideband absorber with a certain frequency transmission window. The proposal may be applied in radome designs to reduce the radar cross section of antenna or improving the electromagnetic compatibility in communication devices. (C) 2017 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).

A Polarization-Sensitive Visible Broadband Absorber Based on a Phase-Modulation Metasurface

Omnidirectional, Thin Metasurface Exhibiting Selective Absorption for Un-Polarized Broadband Incidence

Broadband Metamaterial Absorber with an In-Band Metasurface Function.

Active Metamaterial Absorber with Controllable Polarisation and Frequency

Design Of A Polarization-Insensitive Wideband Tunable Metamaterial Absorber Based On Split Semi-Circle Ring Resonators

Ultra-Broadband and Polarization-Insensitive Metamaterial Absorber Based on Frequency Selective Surface

Design of an Ultrabroadband Visible Metamaterial Absorber Based on Three-Dimensional Metallic Nanostructures

Metasurface Broadband Solar Absorber

Design of A Wide-angleÃ¯Â¼ÂBroadband and Polarization Insensitivity Metamaterial Absorber

Polarization-Selective Bidirectional Absorption Based on a Bilayer Plasmonic Metasurface

Multi-polarization selective absorber based on terahertz metasurface

Numerical study of an ultra-broadband, wide-angle, polarization-insensitive absorber in visible and infrared region

Long‐Infrared Broadband Polarization‐Sensitive Absorber with Metasurface Based on Ladder Network

Polarization-dependent Bi-Functional Metasurface for Directive Radiation and Diffusion-Like Scattering

Polarization-Insensitive Ultra-wideband Metamaterial Absorber for C- and X-bands

An Ultra-wide-angle Metasurface Absorber Operating in the Ultraviolet to Visible Range

Polarization Insensitive Metamaterial Absorber with Wide Incident Angle

Polarization-Angle-Insensitive Dual-Band Perfect Metamaterial Absorbers in the Visible Region: A Theoretical Study

Narrowband-to-broadband switchable and polarization-insensitive terahertz metasurface absorber enabled by phase-change material

Dispersion-Engineered, Broadband, Wide-Angle, Polarization-Independent Microwave Metamaterial Absorber

Selective wave-transmitting electromagnetic absorber through composite metasurface