Abstract:This As classical tomographic synthetic aperture radar (TomoSAR) imaging techniques, the spectral analysis and compressive sensing (CS) have been applied on a large quantity of applications. Whereas, a critical procedure of the processing, defined as deramping, has great influence on the focusing results due to the essential estimation of the critical baselines. To avoid this operation, the general beam forming (BF) method is applied in this paper. The BF method in spatial domain is a general approach to estimate the direction-of-arrival (DOA) in the perpendicular line-of-sight (PLOS) direction. The critical processing in this method is to accumulate signal elements coherently, i.e. homologous points, with the steering vector in a specific pixel after fine registration of all the SAR images. Due to the sophisticated structure and the speckle noise influence over urban areas, all the homologous points in the array SAR images cannot be coregistered precisely in the identical pixels. In order to pick out the most relevant pixels both in phase and amplitude, an inconsistence criterion using joint phase and amplitude (JPA) of pixels in a window about the reference pixel is proposed in this paper. According to the minimization of inconsistence criterion, the homologous points can be picked out for high accuracy focusing of tomographic SAR imaging instead of accumulating data in the fixed pixels, especially for high resolution SAR images. The main feature of the method is that of selecting the most relevant pixels by using the local information of target scatterers and reducing the effect of speckle noise or misregistration. To check the plausibility of our proposed technique, the configuration of the first multi-pass X-band airborne TomoSAR system in China is used. Experimental results with the multi-pass SAR data show the feasibility of improving the focusing power of scatterers in PLOS direction by the proposed method compared to the other methods.

Multipass Sar Tomography: an Improved Autofocus Method Based on Motion Errors Estimation

TomoSAR 3D Focusing Method Via Linear Error Estimation Based on Mulipass Subimage Registration

A Novel 3-D Focusing Scheme for Distributed SAR Tomography.

An Improved Time-Domain Autofocus Method Based on 3-D Motion Errors Estimation

Linear-Array-MIMO SAR Tomography: An Autofocus Approach for Time-Variant and 3-D Space-Variant Motion Errors

Precise Autofocus For Sar Imaging Based On Joint Multi-Region Optimization

Tomosar Focusing By Means Of A Variant Of Tikhonov Regularized Method

High Resolution Multipass Airborne SAR Tomography in Urban Areas

Two-dimensional Autofocus Technique for High-Resolution Spotlight Synthetic Aperture Radar.

A motion error compensation method for linear array three-dimensional synthetic aperture radar

A Novel Focus Approach For Squint Mode Multi-Channeln Azimuth High-Resolution And Wide-Swath Sar Imaging Processing

Motion compensation for Compressive Sensing SAR imaging with autofocus

Multi-Subaperture Interference for SAR Autofocusing

Bistatic SAR Spatial-variant Motion Error Compensation Method Via Joint-refocusing of Multi-subimages

Bistatic Forward-Looking SAR Motion Error Compensation Method Based on Keystone Transform and Modified Autofocus Back-Projection

Autofocus For Correcting Three Dimensional Trajectory Deviations In Synthetic Aperture Radar

An Improved Phase Gradient Autofocus Method for Bistatic SAR

A Multiple-Subapertures Autofocusing Algorithm For Circular Sar Imaging

Accelerated time domain imaging algorithm and its autofocus approach

An Autofocus Method For Sar Frequency-Domain Backprojection Imaging

A Two-Stage Time-Domain Autofocus Method Based on Generalized Sharpness Metrics and AFBP