Abstract:Ultra-thin flat heat pipes (UFHPs) are being explored as a potential thermal management solution to address the heat dissipation challenges of electronic devices. However, the ultra-thin process increases fluid flow resistance and reduces the heat transfer capacity, posing challenges for wick structure optimization. In this study, the effects of wick structure, vapor space, and fluid flow properties on the maximum heat transfer capacity are analyzed by a fluid flow model. Microgroove and microcolumn as wick structures are optimized, and the coupling effects between capillary pressure and fluid flow resistances are analyzed. The maximum heat transfer capacity and the corresponding optimal wick structure dimensions are determined by the vapor space friction and wick structure friction, which are calculated by structural friction coefficients (Sv and Sl) and fluid friction coefficients (Fv and Fl). The models of fluid flow friction chosen in previous literature are validated for accuracy by Fluent. When the height of the wick structure (h) or vapor space (H) increases, the optimal dimensionless wick structure height (h*) increases and decreases under a fixed porosity (epsilon), respectively. The optimal h* of microgroove decreases and that of microcolumn increases as the dimensionless spacing (l*) increases. When ethanol is used as the working fluid, the optimal h* of microgroove is 1.98 and the optimal h* of microcolumn is 0.48, under the condition of H = 0.3 mm, h = 0.15 mm, and epsilon = 0.5. This model also emphasizes the importance of working fluid properties on the design of the wick structure, and a higher value of Fl/Fv results in a lower optimal h*. Moreover, methanol and acetone exhibit higher heat transfer capacity compared with ethanol. This study aims to provide comprehensive design principles for optimizing UFHP heat transfer capacity.

Experimental Study on the Heat Transfer Characteristics of Flat-Plate Micro Heat Pipe Arrays with Grooved Porous Wick Structure and Porous Copper Foam Inserts

Experimental Investigation on the Heat Transfer Performance and Evaporation Temperature Fluctuation of a New-Type Metal Foam Multichannel Heat Pipe

Analysis on Heat Resistance of the Micro Heat Pipe with Arteries

Pore size optimization and fluid channel analysis of composite wick and anti-gravity study

Numerical Analysis on Heat Transfer of Porous Wick Flat Micro Heat Pipe under Various Operating Conditions

Capillary and Thermal Performance Enhancement of Rectangular Grooved Micro Heat Pipe with Micro Pillars

Experimental Investigations on the Heat Transfer Characteristics of Micro Heat Pipe Array Applied to Flat Plate Solar Collector

Heat Transfer Capacity Optimization Design of Microgroove and Microcolumn in an Ultra-Thin Flat Heat Pipe

Design and Fabrication of Flat Heat Pipes with Different Length

Experimental study on the thermal performance of ultra-thin flat heat pipes with novel multiscale striped composite wick structures

Experimental Investigation on the Thermal Performance of Si Micro-Heat Pipe with Different Cross-Sections

Experimental Study of an Integrated Aluminum Flat Plate Heat Pipe for Lightweight Thermal Management in Electronic Devices

Heat Transfer Characteristic of an Ultra-Thin Flat Plate Heat Pipe with Surface-Functional Wicks for Cooling Electronics

Fabrication and Thermal Performance of Copper Pillars Modified Micro Heat Pipe (MHP)

Influence of Parallel and Trapezoidal Wick Structures to the Heat Transfer Capability of MHPs

Experimental Investigation of Thermal Conduction Performance on Silicon-Based Micro Flat Heat Pipe

An Experimental Study of a Composite Wick Structure for Ultra-Thin Flattened Heat Pipes

Experimental Studies on a Novel Thin Flat Heat Pipe Heat Spreader

Thermal Characterization and Wick Optimization of Mini-Grooved Flat Heat Pipe for Electronics Cooling

Effect of geometries on the heat transfer characteristics of flat-plate micro heat pipes

Thermal performance of an ultra-thin flat heat pipe with striped super-hydrophilic wick structure