Abstract:With the rapid development and broad applications of unmanned aerial vehicle (UAV)-based wireless stations in the sky, fundamental understanding and characterization of the realistic air-to-ground (A2G) communication link properties are crucial. In this article, a UAV-aided channel sounder with a real-time processing hardware system is developed for highly dynamic and nonstationary A2G channel measurements. In the hardware system, a global positioning system (GPS)-based triggering signal is designed, the equivalent antenna pattern affected by the UAV airframe is considered, and an appropriate sounding signal is selected, to improve the accuracy of measured channel impulse response (CIR). Moreover, real-time hardware processing algorithms for raw channel data, that is, CIR extraction, system response elimination (SRE), power loss recovery (PLR), and adaptive multipath component (MPC) recognition are developed and implemented on a single field-programmable gate array (FPGA) chip. In this way, the required storage size of channel data and the processing time for one slice of CIR is greatly decreased, which can meet the requirement of nonstationary A2G channel measurement with a high sampling rate and long-time measurement. A commercial channel emulator is used to reproduce controllable channels and verify the performance of the developed channel sounder. Finally, the developed channel sounder is applied to carry out A2G measurement campaigns at 3.5 GHz in a campus scenario. The channel characteristics, that is, path loss (PL), -factor, and path angle are analyzed. The measured channel characteristics are consistent with existing measurements under a similar scenario. The estimated path angles are also validated by the theoretical results. Thus, the channel sounder can be used to capture the nonstationary A2G channel characteristics for the system design and algorithm optimization of A2G commun- cations.

Channel Measurements and Analysis for Fixed-Wing UAV-to-Vehicle Communications at 2.7 GHz in Rural Area

Three-Dimensional Non-Stationary Geometry-Based Modeling of Sub-THz MIMO Channels for UAV Air-to-Ground Communications.

Ground-to-UAV sub-Terahertz channel measurement and modeling

UAV Communication Channel Measurement, Modeling, and Application

Channel Model in Urban Environment for Unmanned Aerial Vehicle Communications

A Three-Dimensional Time-Varying Channel Model for THz UAV-Based Dual-Mobility Channels

Path Loss Measurement And Modeling For Low-Altitude Uav Access Channels

Ray-tracing Simulation and Hybrid Channel Modeling for Low-Terahertz UAV Communications

A Survey on Channel Sounding Technologies and Measurements for UAV-Assisted Communications

UAV-to-Ground Communications: Channel Modeling and UAV Selection

Unmanned Aerial Vehicle Communications: Path-Loss Modeling and Evaluation.

A UAV-Aided Real-Time Channel Sounder for Highly Dynamic Nonstationary A2G Scenarios

Unmanned Aerial Vehicle Propagation Channel over Vegetation and Lake Areas: First- and Second-Order Statistical Analysis

High Altitude Air-to-Ground Channel Modeling for Fixed-Wing UAV Mounted Aerial Base Stations

Empirical Dynamic Modeling for Low-Altitude UAV Propagation Channels

Non-Stationary Channel Modeling for Wireless Communications Underlaying UAV-Based Relay-Assisted IIoT Networks in the Sub-Terahertz Band

Second Order Statistics of Non-Isotropic UAV Ricean Fading Channels

Air-to-Ground Channel Modeling and Performance Analysis for Cellular-Connected UAV Swarm

Performance Analysis of UAV-based Mixed RF-UWOC Transmission Systems

Second Order Statistics Of Non-Isotropic Uav Ricean Fading Channels (Invited Paper)