Abstract:Acoustophoretic microfluidic devices have been developed for accurate, label-free, contactless, and non-invasive manipulation of bioparticles in different biofluids. However, their widespread application is limited due to the need for the use of high quality microchannels made of materials with high specific acoustic impedances relative to the fluid (e.g., silicon or glass with small damping coefficient), manufactured by complex and expensive microfabrication processes. Soft polymers with a lower fabrication cost have been introduced to address the challenges of silicon- or glass-based acoustophoretic microfluidic systems. However, due to their small acoustic impedance, their efficacy for particle manipulation is shown to be limited. Here, we developed a new acoustophoretic microfluid system fabricated by a hybrid sound-hard (aluminum) and sound-soft (polydimethylsiloxane polymer) material. The performance of this hybrid device for manipulation of bead particles and cells was compared to the acoustophoretic devices made of acoustically hard materials. The results show that particles and cells in the hybrid material microchannel travel to a nodal plane with a much smaller energy density than conventional acoustic-hard devices but greater than polymeric microfluidic chips. Against conventional acoustic-hard chips, the nodal line in the hybrid microchannel could be easily tuned to be placed in an off-center position by changing the frequency, effective for particle separation from a host fluid in parallel flow stream models. It is also shown that the hybrid acoustophoretic device deals with smaller temperature rise which is safer for the actuation of bioparticles. This new device eliminates the limitations of each sound-soft and sound-hard materials in terms of cost, adjusting the position of nodal plane, temperature rise, fragility, production cost and disposability, making it desirable for developing the next generation of economically viable acoustophoretic products for ultrasound particle manipulation in bioengineering applications.

Detachable Holographic Acoustofluidic Chip for Striped Acoustic Field Modulation and Particle Manipulation

Femtosecond Laser Micromachining of the Mask for Acoustofluidic Device Preparation

Design of Acoustofluidic Device for Localized Trapping

Detachable artificial micro-structured silicon chip for reconfigurable acoustofluidic particle manipulation

Morphologically Reconfigurable Magnetic Micropillar Arrays Using Acoustic Streaming for Particle Capture and Droplet Manipulation

Acoustically Driven Manipulation of Microparticles and Cells on a Detachable Surface Micromachined Silicon Chip

Phononic-Crystal-Enabled Dynamic Manipulation of Microparticles and Cells in an Acoustofluidic Channel

Numerical and experimental analysis of a hybrid material acoustophoretic device for manipulation of microparticles

Modelling hybrid acoustofluidic devices for enhancing Nano- and Micro-Particle manipulation in microfluidics

Capillary-based, multifunctional manipulation of particles and fluids via focused surface acoustic waves

Bisymmetric Coherent Acoustic Tweezers Based on Modulation of Surface Acoustic Waves for Dynamic and Reconfigurable Cluster Manipulation of Particles and Cells

Programmable Acoustic Holography using Medium‐Sound‐Speed Modulation

Flexible Transportation of Microparticles and Cells in Phononic Crystal Based Acoustofluidic Channel

Dual-Function Multichannel Acoustofluidic Particle Manipulation Enabled by a PMUT Array

Robust global arrangement by coherent enhancement in Huygens-Fresnel traveling surface acoustic wave interference field

A Portable Acoustofluidic Device for Multifunctional Cell Manipulation and Reconstruction

Acoustic particle migration and focusing in a tilted acoustic field

Versatile Acoustic Manipulation of Micro-Objects Using Mode-Switchable Oscillating Bubbles: Transportation, Trapping, Rotation, and Revolution

Acoustofluidic Tweezers Integrated with Droplet Sensing Enable Multifunctional Closed‐Loop Droplet Manipulation

Development and Characterisation of Acoustofluidic Devices Using Detachable Electrodes Made from PCB

Acoustic control of suspended particles in micro fluidic chips